Date: Mon, 23 Feb 1998 15:34:41 -0800 (PST) From: Doug White <dwhite@gdi.uoregon.edu> To: Scott Myron <zamy27@hsonline.net> Cc: "freebsd-questions@FreeBSD.org" <freebsd-questions@FreeBSD.ORG> Subject: Re: question about conf'ing Message-ID: <Pine.BSF.3.96.980223153326.24778O-100000@gdi.uoregon.edu> In-Reply-To: <34F06E5B.CC6536F6@hsonline.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 22 Feb 1998, Scott Myron wrote: > ok, now I've setup ppp, and it works(I think). but it doesn't dial with > my modem. I get like a DialModem error. or something. now.. this is my > question, I've talked to one of my friends and he said like "disable > plug-and-play and it should work" but I just think I don't have the > right com port(cuaa) set. so do I have to disable plug-and-play? or is > it just I don't have it set to the right cuaa? thanks. I know this is a > bit confusing so if you need me to email you back and retell it I will. > thanks again. Here's a hint for the serial devices: /dev/cuaa0 = COM1 /dev/cuaa1 = COM2 You'll have to check the boot messages (run dmesg) to see if they were all found. Then use `set device /dev/device' in ppp to change the modem, then use `term' to drop to terminal mode and ensure you can talk with the modem. See http://www.freebsd.org/~brian/userppp.html for hints. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980223153326.24778O-100000>