Date: Fri, 28 Nov 2003 11:08:27 +0100 From: Sander Smeenk <ssm+fbsd-scsi@freshdot.net> To: freebsd-scsi@freebsd.org Subject: ahd driver & PCI-X (64bit) Adaptec 39320D Ultra320 SCSI adapter Message-ID: <20031128100827.GC20645@freshdot.net>
next in thread | raw e-mail | index | archive | help
Hi, I'm having difficulties with my dual P4 server which has an Adaptec 39320D U320 SCSI adapter connected to 64bit PCI (PCI-X). The driver succeeds to detect the card: | ahd0: <Adaptec 39320D Ultra320 SCSI adapter> port 0x7000-0x70ff,0x7400-0x74ff mem 0xfc200000-0xfc201fff irq 10 at device 1.0 on pci3 | aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs | ahd1: <Adaptec 39320D Ultra320 SCSI adapter> port 0x7800-0x78ff,0x7c00-0x7cff mem 0xfc202000-0xfc203fff irq 10 at device 1.1 on pci3 | aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs But later on in the boot process, it always 'fails' like this: | ahd1: PCI error Interrupt | >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< | ahd1: Dumping Card State at program address 0x94 Mode 0x22 | Card was paused | HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0] | DFFSTAT[0x30]:(CURRFIFO_0|FIFO0FREE|FIFO1FREE) SCSISIGI[0x0]:(P_DATAOUT) | SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) | SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) | SEQCTL0[0x10]:(FASTMODE) SEQINTCTL[0x80]:(INTVEC1DSL) | SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) | SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) | LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] | LQOSTAT1[0x0] LQOSTAT2[0x0] | | SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0 | qinstart = 0 qinfifonext = 0 | QINFIFO: | WAITING_TID_QUEUES: | Pending list: | Total 0 | Kernel Free SCB list: 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 | Sequencer Complete DMA-inprog list: | Sequencer Complete list: | Sequencer DMA-Up and Complete list: | | ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 | SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) | SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) | SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] | SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 | HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) | ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0 | SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) | SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) | SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] | SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 | HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) | LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 | ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42 | ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 | | SIMODE0[0x6c]:(ENOVERRUN|ENIOERR|ENSELDI|ENSELDO) | CCSCBCTL[0x0] | ahd1: REG0 == 0x3533, SINDEX = 0x33, DINDEX = 0x0 | ahd1: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 | CDB 0 0 0 0 0 0 | STACK: 0x1 0x8 0x7 0x6 0x5 0x4 0x3 0x29 | >>>>>>>>>>>>>>>>> | ahd1: Signaled Target Abort At first I thought this was only at boot, because during normal usage I couldn't find anything wrong with the controller or disks. But eventually it started acting up. I tried googling for answers, searched for 'PCI error interrupt', 'Card was paused' and many more combinations, but I failed to find any useful information. Just people who (have?) experience(d?) the same problems, with the same ahd driver. Can someone please shed a light on this matter? Things I could try? I'm lost. I really don't know what to do about this. :| Sander. -- | If you can't convince them, confuse them... | 1024D/08CEC94D - 34B3 3314 B146 E13C 70C8 9BDB D463 7E41 08CE C94D
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031128100827.GC20645>