From owner-freebsd-questions Tue Oct 21 08:01:01 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA17208 for questions-outgoing; Tue, 21 Oct 1997 08:01:01 -0700 (PDT) (envelope-from owner-freebsd-questions) Received: from upsilon.cs.fsu.edu (upsilon.cs.fsu.edu [128.186.121.34]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA17190; Tue, 21 Oct 1997 08:00:57 -0700 (PDT) (envelope-from uh@NU.cs.fsu.edu) Received: (from uh@localhost) by upsilon.cs.fsu.edu (8.8.5/8.7.3) id LAA29317; Tue, 21 Oct 1997 11:00:53 -0400 (EDT) From: Gang-Ryung Uh Message-Id: <199710211500.LAA29317@upsilon.cs.fsu.edu> Subject: 3C589D PCMCIA card configuration To: questions@freebsd.org Date: Tue, 21 Oct 1997 11:00:52 -0400 (EDT) X-Mailer: ELM [version 2.4 PL25] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi, I am running 2.2.2 with PAO package on NEC versa laptop I would like to configure 3C589D PCMCIA card for the laptop. I looked at the config file and check IO address and interrupt queue seems correct. During the boot time: ------ ep0 not found at 0x300 <---- ??? .... PC-Card VLSI 82C146 (5 mem & 2 I/O windows) pcic: controller irq 3 Card inserted, slot 0 Slot 0, unfielded interrupt (0) ep0: utp/bnc[*UTP*] address 00:60:97:8d:d0:45 ----- After the boot, I typed "ifconfig -a" ---- lp0: .. tun0: .. sl0: .. lo0: .. ep0: flags=8802 mtu 1500 ether 00:60:..:..:..:.. ---- I set the "rc.conf" as follows, but ep0 is not up and running: ---- defalutrouter="128.xx.xx.1" .. router_enable="YES" pccard_ether="ep0" ifconfig_common="inet 128.xx.xx.99 netmask 255.255.255.0" ifconfig_ep0="$ifconfig_common" ---- Would you tell me what I did wrong? Thanks in advance. Regards, Gang-Ryung Uh (uh@cs.fsu.edu)