Date: Sat, 20 Jun 2020 17:29:41 +0000 From: bugzilla-noreply@freebsd.org To: x11@FreeBSD.org Subject: [Bug 247441] graphics/gpu-firmware-kmod and or graphics/drm-fbsd11.2-kmod crashing 11.2 to 11.4 with a Radeon HD 5770 card Message-ID: <bug-247441-7141@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D247441 Bug ID: 247441 Summary: graphics/gpu-firmware-kmod and or graphics/drm-fbsd11.2-kmod crashing 11.2 to 11.4 with a Radeon HD 5770 card Product: Ports & Packages Version: Latest Hardware: Any OS: Any Status: New Severity: Affects Some People Priority: --- Component: Individual Port(s) Assignee: ports-bugs@FreeBSD.org Reporter: pauamma@gundo.com CC: bennett@sdf.org, jmd@freebsd.org, x11@FreeBSD.org CC: jmd@freebsd.org, x11@FreeBSD.org [Editor's note: filing this on behalf of Scott Bennett <bennett@sdf.org> who can't file it due to being unable to run X or a GUI browser, as requested by Mark Linimon in IRC.] After a random uptime, messages like the following appear in /var/log/messages. The next messages to appear are the copyright lines of the next reboot. drmn0: ring 0 stalled for more than 10011msec=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 drmn0: GPU lockup (current fence id 0x0000000000029cee last fence id 0x0000000000029d02 on ring 0)=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20 drmn0: failed to get a new IB (-11)=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20 [drm:radeon_cs_ib_fill] Failed to get ib !=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20 drmn0: Saved 631 dwords of commands on ring 0. drm-fbsd11.2-kmod appears to work beautifully, except for one little problem. If xorg is running, then after some random uptime between 3 hours and 35 hours, the GPU apparently hangs, turning my screen light blue with very pale blue vertical pinstripes two pixels wide and separated by somewhere around eight or ten pixels all the way across the screen. It's reasonably pretty, but not what I want. Messages prefixed with "drmn0: " are placed into /var/log/messages, informing that the GPU is not responding and sometimes that the system will be rebooted in 10 seconds, is what does happen every time. After some seconds have elapsed, the system crashes down into the BIOS, which goes through a reset and stops, waiting for approval to continue because one of the fan power connectors on the motherboard is not currently in use. An orderly shutdown is *not* done, so I have to pick up quite a few pieces to get things running again. These crashes do not occur as long as I don't run xorg and just use the default eight virtual consoles, i.e., character mode only. Example of Xorg.0.log dated 14 December 2019: [ 757.454] X.Org X Server 1.18.4 Release Date: 2016-07-19 [ 757.454] X Protocol Version 11, Revision 0 [ 757.454] Build Operating System: FreeBSD 11.3-STABLE amd64 [ 757.454] Current Operating System: FreeBSD hellas 11.3-STABLE FreeBSD 11.3-STABLE #19 r355521: Sun Dec 8 14:41:54 CST 2019=20=20=20=20 bennett@hellas:/usr/obj/usr/src/sys/hellas amd64 [ 757.454] Build Date: 22 September 2019 05:11:08PM [ 757.454]=20=20 [ 757.454] Current version of pixman: 0.38.4 [ 757.454] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 757.454] Markers: (--) probed, (**) from config file, (=3D=3D) default = setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 757.454] (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 14 18:= 25:55 2019 [ 757.537] (=3D=3D) Using config directory: "/usr/local/etc/X11/xorg.conf= .d" [ 757.537] (=3D=3D) Using system config directory "/usr/local/share/X11/xorg.conf.d" [ 757.555] (=3D=3D) No Layout section. Using the first Screen section. [ 757.555] (=3D=3D) No screen section available. Using defaults. [ 757.555] (**) |-->Screen "Default Screen Section" (0) [ 757.555] (**) | |-->Monitor "<default monitor>" [ 757.557] (=3D=3D) No monitor specified for screen "Default Screen Secti= on". Using a default monitor configuration. [ 757.557] (=3D=3D) Automatically adding devices [ 757.557] (=3D=3D) Automatically enabling devices [ 757.557] (=3D=3D) Not automatically adding GPU devices [ 757.559] (=3D=3D) Max clients allowed: 256, resource mask: 0x1fffff [ 758.273] (**) FontPath set to: /usr/local/share/fonts/100dpi, /usr/local/share/fonts/75dpi, /usr/local/share/fonts/adobe-cmaps, /usr/local/share/fonts/Caladea, /usr/local/share/fonts/cantarell, /usr/local/share/fonts/Carlito, /usr/local/share/fonts/cyrillic, /usr/local/share/fonts/dejavu, /usr/local/share/fonts/Droid, /usr/local/share/fonts/freefont-ttf, /usr/local/share/fonts/GentiumBasic, /usr/local/share/fonts/GentiumPlus, /usr/local/share/fonts/libdockapp, /usr/local/share/fonts/Liberation, /usr/local/share/fonts/LinLibertineG, /usr/local/share/fonts/Lohit, /usr/local/share/fonts/misc, /usr/local/share/fonts/nanum-ttf, /usr/local/share/fonts/OTF, /usr/local/share/fonts/stix, /usr/local/share/fonts/terminus-font, /usr/local/share/fonts/TrueType, /usr/local/share/fonts/TTF, /usr/local/share/fonts/twemoji-color-font-ttf, /usr/local/share/fonts/Type1, /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/f [ 758.273] (=3D=3D) ModulePath set to "/usr/local/lib/xorg/modules" [ 758.273] (II) The server relies on devd to provide the list of input devices. If no devices become available, reconfigure devd or disable AutoAddDevi= ces. [ 758.273] (II) Loader magic: 0x84ae90 [ 758.273] (II) Module ABI versions: [ 758.273] X.Org ANSI C Emulation: 0.4 [ 758.273] X.Org Video Driver: 20.0 [ 758.273] X.Org XInput driver : 22.1 [ 758.273] X.Org Server Extension : 9.0 [ 758.273] (--) PCI:*(0:2:0:0) 1002:68b8:1002:2543 rev 0, Mem @ 0xc0000000/268435456, 0xdfdc0000/131072, I/O @ 0x00009c00/256, BIOS @ 0x????????/65536 [ 758.273] (II) LoadModule: "glx" [ 758.275] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 758.791] (II) Module glx: vendor=3D"X.Org Foundation" [ 758.791] compiled for 1.18.4, module version =3D 1.0.0 [ 758.791] ABI class: X.Org Server Extension, version 9.0 [ 758.791] (=3D=3D) AIGLX enabled [ 758.791] (=3D=3D) Matched ati as autoconfigured driver 0 [ 758.791] (=3D=3D) Matched modesetting as autoconfigured driver 1 [ 758.791] (=3D=3D) Matched scfb as autoconfigured driver 2 [ 758.791] (=3D=3D) Matched vesa as autoconfigured driver 3 [ 758.791] (=3D=3D) Assigned the driver to the xf86ConfigLayout [ 758.791] (II) LoadModule: "ati" [ 758.817] (II) Loading /usr/local/lib/xorg/modules/drivers/ati_drv.so [ 758.831] (II) Module ati: vendor=3D"X.Org Foundation" [ 758.831] compiled for 1.18.4, module version =3D 19.0.1 [ 758.831] Module class: X.Org Video Driver [ 758.831] ABI class: X.Org Video Driver, version 20.0 [ 758.831] (II) LoadModule: "radeon" [ 758.831] (II) Loading /usr/local/lib/xorg/modules/drivers/radeon_drv.so [ 759.004] (II) Module radeon: vendor=3D"X.Org Foundation" [ 759.004] compiled for 1.18.4, module version =3D 19.0.1 [ 759.004] Module class: X.Org Video Driver [ 759.004] ABI class: X.Org Video Driver, version 20.0 [ 759.004] (II) LoadModule: "modesetting" [ 759.004] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so [ 759.080] (II) Module modesetting: vendor=3D"X.Org Foundation" [ 759.080] compiled for 1.18.4, module version =3D 1.18.4 [ 759.080] Module class: X.Org Video Driver [ 759.080] ABI class: X.Org Video Driver, version 20.0 [ 759.080] (II) LoadModule: "scfb" [ 759.080] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so [ 759.093] (II) Module scfb: vendor=3D"X.Org Foundation" [ 759.093] compiled for 1.18.4, module version =3D 0.0.4 [ 759.093] ABI class: X.Org Video Driver, version 20.0 [ 759.093] (II) LoadModule: "vesa" [ 759.093] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so [ 759.130] (II) Module vesa: vendor=3D"X.Org Foundation" [ 759.130] compiled for 1.18.4, module version =3D 2.4.0 [ 759.130] Module class: X.Org Video Driver [ 759.131] ABI class: X.Org Video Driver, version 20.0 [ 759.131] (II) RADEON: Driver for ATI/AMD Radeon chipsets: ATI Radeon Mobility X600 (M24), ATI FireMV 2400, ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL, ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380), ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4), ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE, ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE, ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360, ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW, ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2), ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000, ATI Radeon X800 (R420), ATI Radeon X800PRO (R420), ATI Radeon X800SE (R420), ATI FireGL X3 (R420), ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420), ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420), ATI Radeon X850 (R480), ATI Radeon X850 XT (R480), ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480), ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7, ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6, ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9), ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1, ATI Radeon 9800PRO, ATI Radeon 9800XT, ATI Radeon Mobility 9600/9700 (M10/M11), ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11), ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11), ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100, ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000, ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C), ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423), ATI Radeon X800LE (R423), ATI Radeon X800SE (R423), ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430), ATI Radeon X800 SE (R430), ATI Radeon X800 (R430), ATI FireGL V7100 (R423), ATI FireGL V5100 (R423), ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26), ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26), ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5), ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200, ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200, ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370), ATI Radeon X600 (RV370), ATI Radeon X550 (RV370), ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370), ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28), ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28), ATI Radeon X850, ATI unknown Radeon / FireGL (R480), ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410), ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410), ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410), ATI Radeon X1800, ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800, ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100, ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300, ATI FireGL V3350, ATI Mobility Radeon X1450, ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200, ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400, ATI Mobility FireGL V5250, ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT, ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300, ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor, ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570, ATI FireGL V7400, ATI Radeon 9100 PRO IGP, ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2, ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98, ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670, ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600, ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830, ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740, ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610, ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870, ATI Mobility Radeon HD 3850, ATI Radeon HD3850, ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630, ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP, ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600, ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470, ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700, ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT, ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700, ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2, ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250, AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics, AMD Radeon HD 6300 Series Graphics, AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS, ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370, AMD Firestream 9350, ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series, ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570, ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270, ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS, AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS, ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI, MULLINS, KAVERI, HAWAII [ 759.140] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 759.140] (II) scfb: driver for wsdisplay framebuffer: scfb [ 759.140] (II) VESA: driver for VESA chipsets: vesa [ 759.140] (--) Using syscons driver with X support (version 2.0) [ 759.140] (--) using VT number 9 [ 759.321] (II) [KMS] Kernel modesetting enabled. [ 759.321] (WW) Falling back to old probe method for modesetting [ 759.321] (WW) Falling back to old probe method for scfb [ 759.321] scfb trace: probe start [ 759.321] scfb trace: probe done [ 759.321] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 759.321] (II) RADEON(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 759.321] (=3D=3D) RADEON(0): Depth 24, (--) framebuffer bpp 32 [ 759.321] (II) RADEON(0): Pixel depth =3D 24 bits stored in 4 bytes (32 = bpp pixmaps) [ 759.321] (=3D=3D) RADEON(0): Default visual is TrueColor [ 759.322] (=3D=3D) RADEON(0): RGB weight 888 [ 759.322] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) [ 759.322] (--) RADEON(0): Chipset: "ATI Radeon HD 5700 Series" (ChipID = =3D 0x68b8) [ 759.322] (II) Loading sub module "fb" [ 759.322] (II) LoadModule: "fb" [ 759.336] (II) Loading /usr/local/lib/xorg/modules/libfb.so [ 759.370] (II) Module fb: vendor=3D"X.Org Foundation" [ 759.370] compiled for 1.18.4, module version =3D 1.0.0 [ 759.370] ABI class: X.Org ANSI C Emulation, version 0.4 [ 759.370] (II) Loading sub module "dri2" [ 759.370] (II) LoadModule: "dri2" [ 759.370] (II) Module "dri2" already built-in [ 761.381] (II) Loading sub module "glamoregl" [ 761.381] (II) LoadModule: "glamoregl" [ 761.382] (II) Loading /usr/local/lib/xorg/modules/libglamoregl.so [ 761.480] (II) Module glamoregl: vendor=3D"X.Org Foundation" [ 761.480] compiled for 1.18.4, module version =3D 1.0.0 [ 761.480] ABI class: X.Org ANSI C Emulation, version 0.4 [ 761.480] (II) glamor: OpenGL accelerated X.org driver based. [ 761.523] (II) glamor: EGL version 1.5: [ 761.586] (II) RADEON(0): glamor detected, initialising EGL layer. [ 761.586] (II) RADEON(0): KMS Color Tiling: enabled [ 761.586] (II) RADEON(0): KMS Color Tiling 2D: enabled [ 761.586] (=3D=3D) RADEON(0): TearFree property default: auto [ 761.586] (II) RADEON(0): KMS Pageflipping: enabled [ 761.604] (II) RADEON(0): Output DisplayPort-0 has no monitor section [ 761.604] (II) RADEON(0): Output HDMI-0 has no monitor section [ 761.636] (II) RADEON(0): Output DVI-0 has no monitor section [ 761.642] (II) RADEON(0): Output DVI-1 has no monitor section [ 761.660] (II) RADEON(0): EDID for output DisplayPort-0 [ 761.660] (II) RADEON(0): EDID for output HDMI-0 [ 761.692] (II) RADEON(0): EDID for output DVI-0 [ 761.692] (II) RADEON(0): Manufacturer: DEL Model: 4038 Serial#: 80879= 2405 [ 761.692] (II) RADEON(0): Year: 2008 Week: 25 [ 761.692] (II) RADEON(0): EDID Version: 1.3 [ 761.692] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 761.692] (II) RADEON(0): Sync: Separate [ 761.692] (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 29 [ 761.692] (II) RADEON(0): Gamma: 2.20 [ 761.692] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Co= lor Display [ 761.692] (II) RADEON(0): First detailed timing is preferred mode [ 761.692] (II) RADEON(0): redX: 0.669 redY: 0.322 greenX: 0.220 greenY: 0.668 [ 761.692] (II) RADEON(0): blueX: 0.146 blueY: 0.077 whiteX: 0.313 whit= eY: 0.329 [ 761.692] (II) RADEON(0): Supported established timings: [ 761.692] (II) RADEON(0): 720x400@70Hz [ 761.692] (II) RADEON(0): 640x480@60Hz [ 761.692] (II) RADEON(0): 640x480@75Hz [ 761.692] (II) RADEON(0): 800x600@60Hz [ 761.692] (II) RADEON(0): 800x600@75Hz [ 761.692] (II) RADEON(0): 1024x768@60Hz [ 761.692] (II) RADEON(0): 1024x768@75Hz [ 761.692] (II) RADEON(0): 1280x1024@75Hz [ 761.692] (II) RADEON(0): Manufacturer's mask: 0 [ 761.692] (II) RADEON(0): Supported standard timings: [ 761.692] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 761.692] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 761.692] (II) RADEON(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid:= 179 [ 761.692] (II) RADEON(0): Supported detailed timing: [ 761.692] (II) RADEON(0): clock: 146.2 MHz Image Size: 473 x 296 mm [ 761.692] (II) RADEON(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0 [ 761.692] (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0 [ 761.692] (II) RADEON(0): Serial No: G494H86F051U [ 761.692] (II) RADEON(0): Monitor name: SP2208WFP [ 761.692] (II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H ma= x: 83 kHz, PixClock max 165 MHz [ 761.692] (II) RADEON(0): EDID (in hex): [ 761.693] (II) RADEON(0): 00ffffffffffff0010ac384055313530 [ 761.693] (II) RADEON(0): 19120103682f1d78ea64b5ab5238ab25 [ 761.693] (II) RADEON(0): 135054a54b00714f8180b30001010101 [ 761.693] (II) RADEON(0): 01010101010121399030621a274068b0 [ 761.693] (II) RADEON(0): 3600d9281100001c000000ff00473439 [ 761.693] (II) RADEON(0): 3448383646303531550a000000fc0053 [ 761.693] (II) RADEON(0): 50323230385746500a202020000000fd [ 761.693] (II) RADEON(0): 00384c1e5310000a2020202020200080 [ 761.693] (II) RADEON(0): Printing probed modes for output DVI-0 [ 761.693] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1= 960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP) [ 761.693] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1= 440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 761.693] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1= 440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 761.693] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 13= 44 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 761.693] (II) RADEON(0): Modeline "1024x768"x75.0 78.75 1024 1040 11= 36 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 761.693] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 11= 84 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 761.693] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1= 056=20 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 761.693] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1= 056=20 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 761.693] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 8= 40=20 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 761.693] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 8= 00=20 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 761.693] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 9= 00=20 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 761.699] (II) RADEON(0): EDID for output DVI-1 [ 761.699] (II) RADEON(0): Output DisplayPort-0 disconnected [ 761.699] (II) RADEON(0): Output HDMI-0 disconnected [ 761.699] (II) RADEON(0): Output DVI-0 connected [ 761.699] (II) RADEON(0): Output DVI-1 disconnected [ 761.699] (II) RADEON(0): Using exact sizes for initial modes [ 761.699] (II) RADEON(0): Output DVI-0 using initial mode 1680x1050 +0+0 [ 761.699] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 761.699] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: s:40000000 visible:f5bd000 [ 761.699] (=3D=3D) RADEON(0): DPI set to (96, 96) [ 761.699] (II) Loading sub module "ramdac" [ 761.699] (II) LoadModule: "ramdac" [ 761.699] (II) Module "ramdac" already built-in [ 761.699] (II) UnloadModule: "modesetting" [ 761.699] (II) Unloading modesetting [ 761.699] (II) UnloadModule: "scfb" [ 761.699] (II) Unloading scfb [ 761.699] (II) UnloadModule: "vesa" [ 761.699] (II) Unloading vesa [ 761.699] (--) Depth 24 pixmap format is 32 bpp [ 761.716] (II) RADEON(0): [DRI2] Setup complete [ 761.716] (II) RADEON(0): [DRI2] DRI driver: r600 [ 761.716] (II) RADEON(0): [DRI2] VDPAU driver: r600 [ 761.716] (II) RADEON(0): Front buffer size: 7087K [ 761.716] (II) RADEON(0): VRAM usage limit set to 220007K [ 761.736] (II) RADEON(0): SYNC extension fences enabled [ 761.736] (II) RADEON(0): Present extension enabled [ 761.736] (=3D=3D) RADEON(0): DRI3 enabled [ 761.736] (=3D=3D) RADEON(0): Backing store enabled [ 761.736] (II) RADEON(0): Direct rendering enabled [ 761.787] (II) RADEON(0): Use GLAMOR acceleration. [ 761.787] (II) RADEON(0): Acceleration enabled [ 761.787] (=3D=3D) RADEON(0): DPMS enabled [ 761.787] (=3D=3D) RADEON(0): Silken mouse enabled [ 761.787] (II) RADEON(0): Set up textured video (glamor) [ 761.800] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video. [ 761.800] (II) RADEON(0): [XvMC] Extension initialized. [ 761.800] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 761.801] (--) RandR disabled [ 761.811] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 761.811] (II) AIGLX: enabled GLX_ARB_create_context [ 761.811] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 761.811] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 761.812] (II) AIGLX: enabled GLX_INTEL_swap_event [ 761.812] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_con= trol [ 761.812] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 761.812] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 761.812] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 761.812] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objec= ts [ 761.812] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 761.813] (II) AIGLX: Loaded and initialized r600 [ 761.813] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 761.823] (II) RADEON(0): Setting screen physical size to 444 x 277 [ 762.793] (II) config/devd: probing input devices... [ 762.793] (II) config/devd: adding input device (null) (/dev/kbdmux) [ 762.793] (II) LoadModule: "kbd" [ 762.793] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so [ 762.801] (II) Module kbd: vendor=3D"X.Org Foundation" [ 762.801] compiled for 1.18.4, module version =3D 1.9.0 [ 762.802] Module class: X.Org XInput Driver [ 762.802] ABI class: X.Org XInput driver, version 22.1 [ 762.802] (II) Using input driver 'kbd' for 'kbdmux' [ 762.802] (**) kbdmux: always reports core events [ 762.802] (**) kbdmux: always reports core events [ 762.802] (**) Option "Protocol" "standard" [ 762.802] (**) Option "XkbRules" "base" [ 762.802] (**) Option "XkbModel" "pc105" [ 762.802] (**) Option "XkbLayout" "us" [ 762.802] (**) Option "config_info" "devd:kbdmux" [ 762.802] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6) [ 762.993] (II) config/devd: kbdmux is enabled, ignoring device ukbd0 [ 762.993] (II) config/devd: kbdmux is enabled, ignoring device ukbd1 [ 762.993] (II) config/devd: kbdmux is enabled, ignoring device atkbd0 [ 762.993] (II) config/devd: adding input device (null) (/dev/sysmouse) [ 762.993] (II) LoadModule: "mouse" [ 762.994] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so [ 763.023] (II) Module mouse: vendor=3D"X.Org Foundation" [ 763.023] compiled for 1.18.4, module version =3D 1.9.3 [ 763.023] Module class: X.Org XInput Driver [ 763.023] ABI class: X.Org XInput driver, version 22.1 [ 763.023] (II) Using input driver 'mouse' for 'sysmouse' [ 763.023] (**) sysmouse: always reports core events [ 763.023] (**) Option "Device" "/dev/sysmouse" [ 763.023] (=3D=3D) sysmouse: Protocol: "Auto" [ 763.023] (**) sysmouse: always reports core events [ 763.023] (=3D=3D) sysmouse: Emulate3Buttons, Emulate3Timeout: 50 [ 763.023] (**) sysmouse: ZAxisMapping: buttons 4 and 5 [ 763.023] (**) sysmouse: Buttons: 5 [ 763.023] (**) Option "config_info" "devd:sysmouse" [ 763.023] (II) XINPUT: Adding extended input device "sysmouse" (type: MO= USE, id 7) [ 763.023] (**) sysmouse: (accel) keeping acceleration scheme 1 [ 763.023] (**) sysmouse: (accel) acceleration profile 0 [ 763.023] (**) sysmouse: (accel) acceleration factor: 2.000 [ 763.023] (**) sysmouse: (accel) acceleration threshold: 4 [ 763.023] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0 [ 763.023] (II) sysmouse: SetupAuto: protocol is SysMouse [ 763.024] (II) config/devd: device /dev/ums0 already opened [ 763.024] (II) config/devd: device /dev/ums1 already opened [ 1246.688] (II) RADEON(0): EDID vendor "DEL", prod id 16440 [ 1246.688] (II) RADEON(0): Using EDID range info for horizontal sync [ 1246.688] (II) RADEON(0): Using EDID range info for vertical refresh [ 1246.688] (II) RADEON(0): Printing DDC gathered Modelines: [ 1246.688] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 19= 60 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP) [ 1246.688] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 10= 56=20 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 1246.688] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 84= 0=20 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 1246.688] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 80= 0=20 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 1246.688] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 90= 0=20 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 1246.689] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 14= 40 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 1246.689] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 1246.689] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 1246.689] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 10= 56=20 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 1246.689] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 1246.689] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 14= 40 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 1246.744] (II) RADEON(0): EDID vendor "DEL", prod id 16440 [ 1246.744] (II) RADEON(0): Using hsync ranges from config file [ 1246.744] (II) RADEON(0): Using vrefresh ranges from config file [ 1246.744] (II) RADEON(0): Printing DDC gathered Modelines: [ 1246.744] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 19= 60 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP) [ 1246.744] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 10= 56=20 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 1246.744] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 84= 0=20 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 1246.744] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 80= 0=20 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 1246.744] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 90= 0=20 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 1246.744] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 14= 40 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 1246.744] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 1246.744] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 1246.744] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 10= 56=20 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 1246.745] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 1246.745] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 14= 40 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 1712.388] (II) config/devd: ignoring device hdac0 [ 1712.406] (II) config/devd: ignoring device hdac1 [ 1712.441] (II) config/devd: ignoring device pcm0 [ 1712.444] (II) config/devd: ignoring device pcm1 [ 1712.448] (II) config/devd: ignoring device pcm2 [ 1712.458] (II) config/devd: ignoring device pcm3 [ 1712.460] (II) config/devd: ignoring device hdaa0 [ 1712.460] (II) config/devd: ignoring device hdacc0 [ 1712.471] (II) config/devd: ignoring device pcm4 [ 1712.477] (II) config/devd: ignoring device hdaa1 [ 1712.478] (II) config/devd: ignoring device hdacc1 dmesg output: Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.3-STABLE #23 r359068: Wed Mar 18 14:31:28 CDT 2020 bennett@hellas:/usr/obj/usr/src/sys/hellas amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(vga): resolution 640x480 CPU microcode: updated from 0x60b to 0x60f CPU: Intel(R) Core(TM)2 Extreme CPU X9650 @ 3.00GHz (3333.40-MHz K8-class = CPU) Origin=3D"GenuineIntel" Id=3D0x10676 Family=3D0x6 Model=3D0x17 Steppi= ng=3D6 =20 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,= MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> =20 Features2=3D0x8e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM= ,SSE4.1> AMD Features=3D0x20100800<SYSCALL,NX,LM> AMD Features2=3D0x1<LAHF> VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory =3D 8589934592 (8192 MB) avail memory =3D 8260100096 (7877 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <DELL MC09 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) WARNING: VIMAGE (virtualized network stack) is a highly experimental featur= e. ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 on motherboard SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! Timecounter "TSC-low" frequency 1666698635 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 module_register_init: MOD_LOAD (vesa, 0xffffffff80fb35e0, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard aesni0: No AESNI support. acpi0: <DELL MC09 > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff irq 0,8 on acpi0 device_attach: hpet0 attach returned 12 atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pci0: <memory, RAM> at device 1.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 vgapci0: <VGA-compatible display> port 0x9c00-0x9cff mem 0xc0000000-0xcfffffff,0xdfdc0000-0xdfddffff irq 16 at device 0.0 on pci2 vgapci0: Boot video device pci2: <multimedia, HDA> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> port 0xfc00-0xfc7f at device 10.0 on pci0 isa0: <ISA bus> on isab0 ohci0: <nVidia nForce MCP55 USB Controller> mem 0xdffff000-0xdfffffff irq 2= 2 at device 11.0 on pci0 usbus0 on ohci0 usbus0: 12Mbps Full Speed USB v1.0 ehci0: <NVIDIA nForce MCP55 USB 2.0 controller> mem 0xdfffe000-0xdfffe0ff i= rq 23 at device 11.1 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xec00-0xec0f at device 13.0 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xdfffd000-0xdfffdfff irq 20 at device 14.0 on pci0 ata2: <ATA channel> at channel 0 on atapci1 ata3: <ATA channel> at channel 1 on atapci1 atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xdfffc000-0xdfffcfff irq 21 at device 14.1 on pci0 ata4: <ATA channel> at channel 0 on atapci2 ata5: <ATA channel> at channel 1 on atapci2 atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xc000-0xc007,0xbc00-0xbc03,0xb800-0xb807,0xb400-0xb403,0xb000-0xb00f mem 0xdfffb000-0xdfffbfff irq 20 at device 14.2 on pci0 ata6: <ATA channel> at channel 0 on atapci3 ata7: <ATA channel> at channel 1 on atapci3 pcib3: <ACPI PCI-PCI bridge> at device 15.0 on pci0 pci3: <ACPI PCI bus> on pcib3 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xdfeff000-0xdfeff7ff,0xdfef8000-0xdfefbfff irq 19 at device 7.0 on pci3 fwohci0: OHCI version 1.10 (ROM=3D0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 52:f6:94:66:00:1d:09:8a fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x5a000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 52:f6:94:1d:09:8a fwe0: Ethernet address: 52:f6:94:1d:09:8a fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 52:f6:94:66:00:1d:09:8a @ 0xfffe00000000, S400, ma= xrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: PhysicalUpperBound register is not implemented. Physical memory access is limited to the first 4GB fwohci0: PhysicalUpperBound =3D 0x00000000 fwohci0: fwohci_intr_core: node_id=3D0x00000001, SelfID Count=3D1, CYCLEMAS= TER mode firewire0: 2 nodes, maxhop <=3D 1 cable IRM irm(1) (me) firewire0: bus manager 1 pci0: <multimedia, HDA> at device 15.1 (no driver attached) nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xac00-0xac07 mem 0xdfffa000-0xdfffafff,0xdfff9000-0xdfff90ff,0xdfff8000-0xdfff800f irq 23 at device 17.0 on pci0 miibus0: <MII bus> on nfe0 ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow nfe0: Using defaults for TSO: 65518/35/2048 nfe0: Ethernet address: 00:22:19:0f:48:3d nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xa800-0xa807 mem 0xdfff7000-0xdfff7fff,0xdfff6000-0xdfff60ff,0xdfff5000-0xdfff500f irq 22 at device 18.0 on pci0 miibus1: <MII bus> on nfe1 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow nfe1: Using defaults for TSO: 65518/35/2048 nfe1: Ethernet address: 00:22:19:0f:48:3e pcib4: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci4: <ACPI PCI bus> on pcib4 atapci4: <JMicron JMB363 UDMA133 controller> port 0x8c00-0x8c07,0x8800-0x8803,0x8400-0x8407,0x8000-0x8003,0x7c00-0x7c0f mem 0xdfcfe000-0xdfcfffff irq 16 at device 0.0 on pci4 ahci0: <JMicron JMB363 AHCI SATA controller> at channel -1 on atapci4 ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported ahci0: quirks=3D0x1<NOFORCE> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ata8: <ATA channel> at channel 0 on atapci4 pcib5: <ACPI PCI-PCI bridge> at device 22.0 on pci0 pci5: <ACPI PCI bus> on pcib5 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdfbfe000-0xdfbfffff irq 16= at device 0.0 on pci5 xhci0: 64 bytes context size, 32-bit DMA xhci0: Unable to map MSI-X table usbus2 on xhci0 usbus2: 5.0Gbps Super Speed USB v3.0 pcib6: <ACPI PCI-PCI bridge> at device 23.0 on pci0 pci6: <ACPI PCI bus> on pcib6 xhci1: <NEC uPD720200 USB 3.0 controller> mem 0xdfafe000-0xdfafffff irq 16 = at device 0.0 on pci6 xhci1: 32 bytes context size, 32-bit DMA xhci1: Unable to map MSI-X table usbus3 on xhci1 usbus3: 5.0Gbps Super Speed USB v3.0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd6fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec DUMMYNET 0xfffff80003723380 with IPv6 initialized (100409) load_dn_sched dn_sched FQ_CODEL loaded load_dn_sched dn_sched FQ_PIE loaded load_dn_sched dn_sched PRIO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched FIFO loaded load_dn_aqm dn_aqm CODEL loaded load_dn_aqm dn_aqm PIE loaded ugen1.1: <nVidia EHCI root HUB> at usbus1 ugen0.1: <nVidia OHCI root HUB> at usbus0 ugen2.1: <0x1912 XHCI root HUB> at usbus2 ugen3.1: <0x1033 XHCI root HUB> at usbus3 uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 uhub2: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub3: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 firewire0: fw_explore_node: fwdev->speed(S800) decremented due to negotiati= on sbp0: sbp_show_sdev_info: sbp0:0:0: ordered:1 type:0 EUI:0090a99f91a48dde node:0 speed:2 maxrec:8 sbp0: sbp_show_sdev_info: sbp0:0:0 'WD' 'My Book' '001028' sbp0: sbp_show_sdev_info: sbp0:0:1: ordered:1 type:13 EUI:0090a99f91a48dde node:0 speed:2 maxrec:8 sbp0: sbp_show_sdev_info: sbp0:0:1 'WD' 'My Book' '001028' uhub1: 4 ports with 4 removable, self powered uhub2: 10 ports with 10 removable, self powered uhub3: 8 ports with 8 removable, self powered ugen3.2: <VIA Labs, Inc. USB3.0 Hub> at usbus3 uhub4 on uhub1 uhub4: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/90.91, addr 1> on us= bus3 uhub4: 4 ports with 4 removable, self powered ugen2.2: <Seagate Backup+ Desk> at usbus2 umass0 on uhub3 umass0: <Seagate Backup+ Desk, class 0/0, rev 3.00/1.00, addr 1> on usbus2 umass0: SCSI over Bulk-Only; quirks =3D 0x0100 umass0:12:0: Attached to scbus12 ugen3.3: <VIA Labs, Inc. USB3.0 Hub> at usbus3 uhub5 on uhub4 uhub5: <VIA Labs, Inc. USB3.0 Hub, class 9/0, rev 3.00/90.91, addr 2> on us= bus3 uhub5: 4 ports with 4 removable, self powered uhub0: 10 ports with 10 removable, self powered ugen3.4: <VIA Labs, Inc. USB2.0 Hub> at usbus3 uhub6 on uhub1 uhub6: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.90, addr 3> on us= bus3 uhub6: 4 ports with 4 removable, self powered ugen1.2: <vendor 0x05e3 USB2.0 Hub> at usbus1 uhub7 on uhub0 uhub7: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> on usb= us1 ugen3.5: <VIA Labs, Inc. USB2.0 Hub> at usbus3 uhub8 on uhub6 uhub8: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.90, addr 4> on us= bus3 uhub7: 4 ports with 4 removable, self powered uhub8: 4 ports with 4 removable, self powered ugen1.3: <Logitech USB Trackball> at usbus1 (probe7:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe7:umass-sim0:0:0:0): Retrying command ugen1.4: <vendor 0x05e3 USB2.0 Hub> at usbus1 uhub9 on uhub0 uhub9: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 4> on usb= us1 ugen2.3: <Seagate FreeAgent GoFlex> at usbus2 umass1 on uhub3 umass1: <Seagate FreeAgent GoFlex, class 0/0, rev 3.00/1.00, addr 2> on usb= us2 umass1: SCSI over Bulk-Only; quirks =3D 0xc101 umass1:13:1: Attached to scbus13 uhub9: 4 ports with 4 removable, self powered ugen0.2: <Dell Dell USB Keyboard Hub> at usbus0 uhub10 on uhub2 uhub10: <Dell USB Keyboard Hub> on usbus0 ugen1.5: <vendor 0x04b4 product 0x6560> at usbus1 uhub11 on uhub0 uhub11: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 5> on usbus1 ugen2.4: <vendor 0x1f75 product 0x0621> at usbus2 umass2 on uhub3 umass2: <vendor 0x1f75 product 0x0621, class 0/0, rev 3.00/0.36, addr 3> on usbus2 umass2: SCSI over Bulk-Only; quirks =3D 0x0100 umass2:14:2: Attached to scbus14 uhub10: 3 ports with 2 removable, bus powered uhub11: 4 ports with 4 removable, self powered ugen0.3: <Dell Dell USB Keyboard> at usbus0 ukbd0 on uhub10 ukbd0: <Dell USB Keyboard> on usbus0 kbd2 at ukbd0 random: unblocking device. ugen1.6: <DELL CAB-200> at usbus1 umass3 on uhub11 umass3: <DELL CAB-200, class 0/0, rev 2.00/7.08, addr 6> on usbus1 umass3: SCSI over Bulk-Only; quirks =3D 0xc000 umass3:15:3: Attached to scbus15 (probe7:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe7:umass-sim0:0:0:0): Retrying command ugen1.7: <Logitech BT Mini-Receiver> at usbus1 uhub12 on uhub11 uhub12: <Logitech BT Mini-Receiver, class 9/0, rev 2.00/58.00, addr 7> on usbus1 (probe7:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe7:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe7:umass-sim0:0:0:0): Retrying command uhub12: 3 ports with 0 removable, bus powered ugen1.8: <Logitech BT Mini-Receiver> at usbus1 ugen1.9: <Logitech BT Mini-Receiver> at usbus1 ukbd1 on uhub12 ukbd1: <Logitech BT Mini-Receiver, class 0/0, rev 2.00/58.00, addr 9> on us= bus1 kbd3 at ukbd1 (probe0:umass-sim2:2:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim2:2:0:0): CAM status: CCB request completed with an error (probe0:umass-sim2:2:0:0): Retrying command ugen1.10: <Logitech BT Mini-Receiver> at usbus1 (probe0:umass-sim2:2:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim2:2:0:0): CAM status: CCB request completed with an error (probe0:umass-sim2:2:0:0): Retrying command usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_STALLED usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_STALLED usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_STALLED usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_STALLED usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_STALLED ugen0.4: <Unknown > at usbus0 (disconnected) uhub_reattach_port: could not allocate new device (probe0:umass-sim2:2:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim2:2:0:0): CAM status: CCB request completed with an error (probe0:umass-sim2:2:0:0): Retrying command (probe0:umass-sim2:2:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim2:2:0:0): CAM status: CCB request completed with an error (probe0:umass-sim2:2:0:0): Retrying command ada0 at ata4 bus 0 scbus4 target 0 lun 0 ada0: <ST1000DM003-9YN162 CC4H> ATA8-ACS SATA 3.x device ada0: Serial Number Z1D4Y5W1 ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: 953869MB (1953525168 512 byte sectors) ada0: quirks=3D0x1<4K> ada1 at ata5 bus 0 scbus5 target 0 lun 0 ada1: <WDC WD1003FZEX-00MK2A0 01.01A01> ACS-2 ATA SATA 3.x device ada1: Serial Number WD-WCC3F1AY9KR3 ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada1: 953869MB (1953525168 512 byte sectors) ada1: quirks=3D0x1<4K> ada2 at ata6 bus 0 scbus6 target 0 lun 0 ada2: <ST2000DM001-1CH164 CC27> ACS-2 ATA SATA 3.x device ada2: Serial Number Z1E4Q0T1 ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada2: 1907729MB (3907029168 512 byte sectors) ada2: quirks=3D0x1<4K> ada3 at ata7 bus 0 scbus7 target 0 lun 0 ada3: <WDC WD2003FZEX-00SRLA0 01.01A01> ACS-3 ATA SATA 3.x device ada3: Serial Number WD-WCC6N7KD2YAK ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada3: 1907729MB (3907029168 512 byte sectors) ada3: quirks=3D0x1<4K> ada4 at ahcich0 bus 0 scbus9 target 0 lun 0 ada4: <WDC WD3000FYYZ-01UL1B3 01.01K04> ATA8-ACS SATA 3.x device ada4: Serial Number WD-WMC130F2V1RN ada4: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 2861588MB (5860533168 512 byte sectors) ses0 at sbp0 bus 0 scbus8 target 0 lun 1 cd0 at ata2 bus 0 scbus2 target 0 lun 0 ses0: cd0: <WD My Book Device > Fixed Enclosure Services SPC-2 SCSI device <HL-DT-ST DVD+-RW GSA-H73N C106> Removable CD-ROM SCSI device ses0: 50.000MB/s transferscd0: 150.000MB/s transfers ses0: SES Device (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present cd1 at ata3 bus 0 scbus3 target 0 lun 0 cd1: <PLDS BD-RE DH-4B1S 7D14> Removable CD-ROM SCSI device cd1: Serial Number 0000090825 cd1: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim1 bus 1 scbus13 target 0 lun 0 da2: <Seagate FreeAgent GoFlex 210> Fixed Direct Access SCSI device da2: Serial Number NA0E8J03 da2: 400.000MB/s transfers da2: 476940MB (976773167 512 byte sectors) da2: quirks=3D0x2<NO_6_BYTE> da3 at umass-sim2 bus 2 scbus14 target 0 lun 0 da3: <WDC WD30 00FYYZ-01UL1B3 > Fixed Direct Access SPC-4 SCSI device da3: Serial Number 1 da3: 400.000MB/s transfers da3: 2861588MB (5860533168 512 byte sectors) da3: quirks=3D0x2<NO_6_BYTE> da1 at umass-sim0 bus 0 scbus12 target 0 lun 0 da1: < > Fixed Direct Access SCSI device da1: Serial Number NA5KYLVM da1: 400.000MB/s transfers da1: 1907729MB (3907029167 512 byte sectors) da1: quirks=3D0x2<NO_6_BYTE> da0 at sbp0 bus 0 scbus8 target 0 lun 0 da0: <WD My Book 1028> Fixed Direct Access SPC-2 SCSI device da0: 50.000MB/s transfers da0: 1907729MB (3907029168 512 byte sectors) da0: quirks=3D0x2<NO_6_BYTE> GEOM_ELI: Device ada0p2.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software da4 at umass-sim3 bus 3 scbus15 target 0 lun 0 da4: <DELL USB HS-CF Card 7.08> Removable Direct Access SCSI device da4: Serial Number 000001034CE8 da4: 40.000MB/s transfers da4: Attempt to query device size failed: NOT READY, Medium not present da4: quirks=3D0x2<NO_6_BYTE> hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/40/0x67<INT,USR,SYS,REA,WRI> Trying to mount root from zfs:system/ROOT/hellas.r359068 []... da5 at umass-sim3 bus 3 scbus15 target 0 lun 1 da5: <DELL USB HS-xD/SM 7.08> Removable Direct Access SCSI device da5: Serial Number 000001034CE8 da5: 40.000MB/s transfers da5: Attempt to query device size failed: NOT READY, Medium not present da5: quirks=3D0x2<NO_6_BYTE> da6 at umass-sim3 bus 3 scbus15 target 0 lun 2 da6: <DELL USB HS-MS Card 7.08> Removable Direct Access SCSI device da6: Serial Number 000001034CE8 da6: 40.000MB/s transfers da6: Attempt to query device size failed: NOT READY, Medium not present da6: quirks=3D0x2<NO_6_BYTE> da7 at umass-sim3 bus 3 scbus15 target 0 lun 3 da7: <DELL USB HS-SD Card 7.08> Removable Direct Access SCSI device da7: Serial Number 000001034CE8 da7: 40.000MB/s transfers da7: Attempt to query device size failed: NOT READY, Medium not present da7: quirks=3D0x2<NO_6_BYTE> Enter passphrase for ada0p6: GEOM_ELI: Device ada0p6.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ada1p2.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_MIRROR: Force device dbtor start due to timeout. GEOM_ELI: Device ada1p6.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_MIRROR: Device mirror/dbtor launched (1/2). GEOM_ELI: Device ada1p13.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software Enter passphrase for ada4p1: GEOM_MIRROR: Force device bw1 start due to timeout. GEOM_MIRROR: Force device bw0 start due to timeout. GEOM_ELI: Wrong key for ada4p1. Tries left: 2. Enter passphrase for ada4p1: GEOM_ELI: Wrong key for ada4p1. Tries left: 1. Enter passphrase for ada4p1: GEOM_ELI: Wrong key for ada4p1. No tries left. GEOM_MIRROR: Device mirror/bw1 launched (1/2).GEOM_MIRROR : Device mirror/bw0 launched (1/2). GEOM_MIRROR: Cancelling unmapped because of da0p5. GEOM_MIRROR: Cancelling unmapped because of da1p5. GEOM_MIRROR: Device mirror/bw2 launched (2/2). Enter passphrase for da3p1: GEOM_ELI: Wrong key for da3p1. Tries left: 2. Enter passphrase for da3p1: GEOM_ELI: Wrong key for da3p1. Tries left: 1. Enter passphrase for da3p1: GEOM_ELI: Wrong key for da3p1. No tries left. Enter passphrase for gpt/WD-WMC130F2V1RN: GEOM_ELI: Wrong key for gpt/WD-WMC130F2V1RN. Tries left: 2. Enter passphrase for gpt/WD-WMC130F2V1RN: GEOM_ELI: Wrong key for gpt/WD-WMC130F2V1RN. Tries left: 1. Enter passphrase for gpt/WD-WMC130F2V1RN: GEOM_ELI: Wrong key for gpt/WD-WMC130F2V1RN. No tries left. GEOM_CONCAT: Device buildwork created (id=3D3312381894). GEOM_CONCAT: Disk mirror/bw1 attached to buildwork. GEOM_CONCAT: Disk mirror/bw0 attached to buildwork. GEOM_CONCAT: Disk mirror/bw2 attached to buildwork. GEOM_CONCAT: Device concat/buildwork activated. Enter passphrase for gpt/Insignia%20case-WD%20SN%201: GEOM_ELI: Wrong key f= or gpt/Insignia%20case-WD%20SN%201. Tries left: 2. Enter passphrase for gpt/Insignia%20case-WD%20SN%201: GEOM_ELI: Wrong key f= or gpt/Insignia%20case-WD%20SN%201. Tries left: 1. Enter passphrase for gpt/Insignia%20case-WD%20SN%201: GEOM_ELI: Wrong key f= or gpt/Insignia%20case-WD%20SN%201. No tries left. GEOM_ELI: Device mirror/dbtor.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ada0p4.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device ada1p4.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software anon_inodefs_init: can't re-use a leaf (debug)! [drm] radeon kernel modesetting enabled. drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x1002:0x2543 0x00). [drm] register mmio base: 0xDFDC0000 [drm] register mmio size: 131072 [drm:radeon_device_init] Unable to find PCI I/O BAR [drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM = IIO ATOM BIOS: JUNIPER drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suf= fer [drm] Detected VRAM RAM=3D1024M, BAR=3D256M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 4173008 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 1024M of GTT memory ready. [drm] Loading JUNIPER Microcode radeon/JUNIPER_pfp.bin: could not load firmware image, error 2 radeon/JUNIPER_pfp.bin: could not load firmware image, error 2 radeon/JUNIPER_me.bin: could not load firmware image, error 2 radeon/JUNIPER_me.bin: could not load firmware image, error 2 radeon/JUNIPER_rlc.bin: could not load firmware image, error 2 radeon/JUNIPER_rlc.bin: could not load firmware image, error 2 radeon/JUNIPER_smc.bin: could not load firmware image, error 2 radeon/JUNIPER_smc.bin: could not load firmware image, error 2 [drm] Internal thermal controller with fan control [drm] radeon: dpm initialized radeon/CYPRESS_uvd.bin: could not load firmware image, error 2 radeon/CYPRESS_uvd.bin: could not load firmware image, error 2 [drm] GART: num cpu pages 262144, num gpu pages 262144 [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=3D0 [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). drmn0: WB enabled drmn0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff800447c6c00 drmn0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff800447c6c0c drmn0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x0xfffff800c005c418 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. drmn0: radeon: MSI limited to 32-bit [drm] radeon: irq initialized. [drm] ring test on 0 succeeded in 1 usecs [drm] ring test on 3 succeeded in 2 usecs [drm] ring test on 5 succeeded in 1 usecs [drm] UVD initialized successfully. [drm] ib test on ring 0 succeeded in 0 usecs [drm] ib test on ring 3 succeeded in 0 usecs [drm] ib test on ring 5 succeeded [drm] hw_i2c forced on, you may experience display detection problems! [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Connector DVI-I-1: get mode from tunables: [drm] - kern.vt.fb.modes.DVI-I-1 [drm] - kern.vt.fb.default_mode [drm] Connector DVI-I-2: get mode from tunables: [drm] - kern.vt.fb.modes.DVI-I-2 [drm] - kern.vt.fb.default_mode [drm] Radeon Display Connectors [drm] Connector 0: [drm] DP-1 [drm] HPD4 [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY2 [drm] Connector 1: [drm] HDMI-A-1 [drm] HPD5 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] DFP2: INTERNAL_UNIPHY2 [drm] Connector 2: [drm] DVI-I-1 [drm] HPD1 [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [drm] Encoders: [drm] DFP3: INTERNAL_UNIPHY1 [drm] CRT2: INTERNAL_KLDSCP_DAC2 [drm] Connector 3: [drm] DVI-I-2 [drm] HPD6 [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [drm] Encoders: [drm] DFP4: INTERNAL_UNIPHY [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] fb mappable at 0xC034D000 [drm] vram apper at 0xC0000000 [drm] size 7299072 [drm] fb depth is 24 [drm] pitch is 6912 VT: Replacing driver "vga" with new "fb". start FB_INFO: type=3D11 height=3D1050 width=3D1680 depth=3D32 cmsize=3D16 size=3D7299072 pbase=3D0xc034d000 vbase=3D0xfffff800c034d000 name=3Ddrmn0 flags=3D0x0 stride=3D6912 bpp=3D32 cmap[0]=3D0 cmap[1]=3D7f0000 cmap[2]=3D7f00 cmap[3]=3Dc4a000 end FB_INFO drmn0: fb0: radeondrmfb frame buffer device [drm] Initialized radeon 2.49.0 20080528 for drmn0 on minor 0 lo0: link state changed to UP nfe0: link state changed to DOWN nfe1: link state changed to DOWN uhid0 on uhub10 uhid0: <Dell USB Keyboard> on usbus0 ums0 on uhub12 ums0: <Logitech BT Mini-Receiver, class 0/0, rev 2.00/58.00, addr 10> on us= bus1 ums0: 14 buttons and [XYZT] coordinates ID=3D2 ums1 on uhub7 ums1: <Logitech USB Trackball, class 0/0, rev 1.10/14.00, addr 3> on usbus1 ums1: 5 buttons and [XY] coordinates ID=3D0 ubt0 on uhub12 ubt0: <Logitech BT Mini-Receiver, class 224/1, rev 2.00/58.00, addr 8> on usbus1 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() pflog0: promiscuous mode enabled nfe0: link state changed to UP Accounting enabled --=20 You are receiving this mail because: You are on the CC list for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-247441-7141>