Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 30 Jan 2007 14:56:49 +0300
From:      Anton Yuzhaninov <citrin@citrin.ru>
To:        freebsd-scsi@freebsd.org
Subject:   Problem with AIC-7902B Ultra320 SCSI Controller
Message-ID:  <1579877114.20070130145649@citrin.ru>

next in thread | raw e-mail | index | archive | help

This is a cryptographically signed message in MIME format.

------------1171831462C568BFD
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

Hello, freebsd-scsi.

At boot time kernel write to logs:

Jan 30 10:35:15 cf2 kernel: Waiting 5 seconds for SCSI devices to settle
Jan 30 10:35:15 cf2 kernel: ahd1: SCSI Cell parity error SSTAT3 =3D=3D 0x2
Jan 30 10:35:15 cf2 kernel: ahd1: Missing case in ahd_handle_scsiint. statu=
s =3D 0
Jan 30 10:35:15 cf2 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<=
<<<<<<<<<<<<
Jan 30 10:35:15 cf2 kernel: ahd1: Dumping Card State at program address 0x3=
2 Mode 0x33
Jan 30 10:35:15 cf2 kernel: Card was paused
... [skipped] ...
Jan 30 10:35:15 cf2 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>=
>>>>>>>>>>
Jan 30 10:35:15 cf2 kernel: ahd0: SCSI Cell parity error SSTAT3 =3D=3D 0x2
Jan 30 10:35:15 cf2 kernel: ahd0: Missing case in ahd_handle_scsiint. statu=
s =3D 0
Jan 30 10:35:15 cf2 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<=
<<<<<<<<<<<<
Jan 30 10:35:15 cf2 kernel: ahd0: Dumping Card State at program address 0x2=
 Mode 0x33
Jan 30 10:35:15 cf2 kernel: Card was paused
... [skipped] ...
Jan 30 10:35:15 cf2 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>=
>>>>>>>>>>
Jan 30 10:35:15 cf2 kernel: ses0 at ahd0 bus 0 target 6 lun 0
Jan 30 10:35:15 cf2 kernel: ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 d=
evice
Jan 30 10:35:15 cf2 kernel: ses0: 3.300MB/s transfers
Jan 30 10:35:15 cf2 kernel: ses0: SAF-TE Compliant Device
Jan 30 10:35:15 cf2 kernel: da0 at ahd0 bus 0 target 0 lun 0
Jan 30 10:35:15 cf2 kernel: da0: <FUJITSU MAT3073NC 0108> Fixed Direct Acce=
ss SCSI-3 device
Jan 30 10:35:15 cf2 kernel: da0: 320.000MB/s transfers (160.000MHz, offset =
127, 16bit), Tagged Queueing Enabled
Jan 30 10:35:15 cf2 kernel: da0: 70136MB (143638992 512 byte sectors: 255H =
63S/T 8941C)
Jan 30 10:35:15 cf2 kernel: da1 at ahd0 bus 0 target 2 lun 0
Jan 30 10:35:15 cf2 kernel: da1: <FUJITSU MAT3073NC 0108> Fixed Direct Acce=
ss SCSI-3 device
Jan 30 10:35:15 cf2 kernel: da1: 320.000MB/s transfers (160.000MHz, offset =
127, 16bit), Tagged Queueing Enabled
Jan 30 10:35:15 cf2 kernel: da1: 70136MB (143638992 512 byte sectors: 255H =
63S/T 8941C)

ahd0@pci2:3:0:  class=3D0x010000 card=3D0x081115d9 chip=3D0x801d9005 rev=3D=
0x10 hdr=3D0x00
    vendor   =3D 'Adaptec Inc'
    device   =3D 'AIC-7902B Ultra320 SCSI Controller'
    class    =3D mass storage
    subclass =3D SCSI

6.2-RELEASE i386

Full log at http://pastebin.com/871132

Is there any problem with controller or driver?

--=20
WBR,
 Anton Yuzhaninov

------------1171831462C568BFD--




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1579877114.20070130145649>