Date: Tue, 19 Dec 2006 16:38:55 GMT From: "Dr. Gary E. RAFE"<ger.rrgllc@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/106924: ACPI resume returns g_vfs_done() errors and kernel panic Message-ID: <200612191638.kBJGct1N078689@www.freebsd.org> Resent-Message-ID: <200612191640.kBJGeFEJ076291@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 106924
>Category: i386
>Synopsis: ACPI resume returns g_vfs_done() errors and kernel panic
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Dec 19 16:40:15 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Dr. Gary E. RAFE
>Release: 6.1-RELEASE
>Organization:
Rafe & Rouillard Group, LLC
>Environment:
FreeBSD tsp6100a.nonet 6.1-RELEASE FreeBSD 6.1-RELEASE #6: Sun Dec 17 23:17:36 EST 2006 root@tsp6100a:/usr/src/sys/i386/compile/TSP6100B i386
>Description:
Hardware: Toshiba Satellite Pro 6100, BIOS Ver. 1.90 (25 Jul 2003)
System running custom kernel w/o APM or USB devices suspends properly with
"acpiconf -s S3" command.
Upon resume with Power button actuation, kernel reports:
g_vfs_done():ad0s2a[READ(offset=3698522112, length=2048)]error = 6
to the text console, followed by:
panic: vinvalbuf: dirty bufs
and the system "crashes".
Output of "sysctl hw.acpi":
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 1
hw.acpi.verbose: 0
hw.acpi.reset_video: 0
hw.acpi.cpu.cx_supported: C1/0 C2/1 C3/85
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00% 0.00% 0.00%
hw.acpi.battery.life: 100
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 2
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 1
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.tz0.temperature: 60.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 98.0C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 99.0C
hw.acpi.thermal.tz0._ACx: 98.0C 98.0C -1 -1 -1 -1 -1 -1 -1 -1
Output of "verbose" dmesg(8):
// boot -v (APM- & USB-free kernel)
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #3: Sun Dec 17 21:49:45 EST 2006
root@tsp6100a:/usr/src/sys/i386/compile/TSP6100C
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07cd000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc07cd1ec.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07cd298.
Calibrating clock(s) ... i8254 clock: 1193176 Hz
Timecounter "i8254" frequency 1193176 Hz quality 0
Calibrating TSC clock ... TSC clock: 1993532168 Hz
CPU: Intel(R) Pentium(R) 4 Mobile CPU 2.00GHz (1993.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 804519936 (767 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x000000002f18afff, 781606912 bytes (190822 pages)
avail memory = 782172160 (745 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0260
bios32: Entry = 0xfc140 (c00fc140) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xd5ad
pnpbios: Found PnP BIOS data at 0xc00f0470
pnpbios: Entry = f0000:9138 Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 5937f351
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
io: <I/O>
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00
00 01 00 02 17 04 07 01 00 01 1a 01 00 01 28 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 06 01
07 01 0e 01 0f 01 11 01 12 01 14 01 15 01 17 01
VESA: 30 mode(s) found
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc06d2002 (1000022)
VESA: NVidia
VESA: NVidia Corporation NV17 () Board Chip Rev A2
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: INT 16 interface
acpi0: <TOSHIB 750> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00f01d0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 31 A 0x62 11
embedded 0 31 B 0x61 11
embedded 0 29 A 0x60 11
embedded 0 29 B 0x63 11
embedded 0 29 C 0x62 11
embedded 2 11 A 0x60 11
embedded 2 11 B 0x61 11
embedded 2 8 A 0x68 11
embedded 1 0 A 0x6a 10
embedded 2 10 A 0x6b 11
embedded 2 10 B 0x69 11
embedded 2 13 A 0x60 11
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 30 func 0
acpi0: [MPSAFE]
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 11 12
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 11 12
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 11 12
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 11 12
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 11 12
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 11 12
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 10
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 10
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 11 12
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 11 12
ACPI timer: 1/1 1/1 1/1 1/1 1/1 0/315 0/369 1/1 1/1 1/1 -> 8
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xee08-0xee0b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.31.INTA at func 1: 11
ACPI: Found matching pin for 0.31.INTB at func 5: 11
ACPI: Found matching pin for 0.29.INTA at func 0: 11
ACPI: Found matching pin for 0.29.INTB at func 1: 11
ACPI: Found matching pin for 0.29.INTC at func 2: 11
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x1a30, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x1a31, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2482, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000efe0, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0)
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x8086, dev=0x2484, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 0000ef80, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0)
pcib0: slot 29 INTB routed to irq 11 via \\_SB_.LNKD
found-> vendor=0x8086, dev=0x2487, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type 4, range 32, base 0000ef60, size 5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0)
pcib0: slot 29 INTC routed to irq 11 via \\_SB_.LNKC
found-> vendor=0x8086, dev=0x2448, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248a, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000cfa0, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, enabled
pcib0: matched entry for 0.31.INTA (src \\_SB_.LNKC:0)
pcib0: slot 31 INTA routed to irq 11 via \\_SB_.LNKC
found-> vendor=0x8086, dev=0x2485, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type 4, range 32, base 0000ce00, size 8, enabled
map[14]: type 4, range 32, base 0000cdc0, size 6, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0)
pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB
found-> vendor=0x8086, dev=0x2486, revid=0x02
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type 4, range 32, base 0000ca00, size 8, enabled
map[14]: type 4, range 32, base 0000c980, size 7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0)
pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfd000000-0xfdffffff
pcib1: prefetched decode 0xdbf00000-0xdfffffff
ACPI: Found matching pin for 1.0.INTA at func 0: 10
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x10de, dev=0x0175, revid=0xa3
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib1: (null) requested memory range 0xfd000000-0xfdffffff: good
map[14]: type 3, range 32, base dc000000, size 26, enabled
pcib1: (null) requested memory range 0xdc000000-0xdfffffff: good
map[18]: type 3, range 32, base dbf80000, size 19, enabled
pcib1: (null) requested memory range 0xdbf80000-0xdbffffff: good
pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKG:0)
pcib1: slot 0 INTA routed to irq 10 via \\_SB_.LNKG
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 5
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfce00000-0xfcefffff
pcib2: prefetched decode 0xdbd00000-0xdbdfffff
pcib2: Subtractively decoded bridge.
ACPI: Found matching pin for 2.11.INTA at func 0: 11
ACPI: Found matching pin for 2.11.INTB at func 1: 11
ACPI: Found matching pin for 2.8.INTA at func 0: 11
ACPI: Found matching pin for 2.10.INTA at func 0: 11
ACPI: Found matching pin for 2.13.INTA at func 0: 11
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x8086, dev=0x1031, revid=0x42
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fceff000, size 12, enabled
pcib2: (null) requested memory range 0xfceff000-0xfcefffff: good
map[14]: type 4, range 32, base 0000df40, size 6, enabled
pcib2: (null) requested I/O range 0xdf40-0xdf7f: in range
pcib2: matched entry for 2.8.INTA (src \\_SB_.LNKE:0)
pcib2: slot 8 INTA routed to irq 11 via \\_SB_.LNKE
found-> vendor=0x1260, dev=0x3873, revid=0x01
bus=2, slot=10, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base dbdff000, size 12, enabled
pcib2: (null) requested memory range 0xdbdff000-0xdbdfffff: good
pcib2: matched entry for 2.10.INTA (src \\_SB_.LNKH:0)
pcib2: slot 10 INTA routed to irq 11 via \\_SB_.LNKH
found-> vendor=0x1179, dev=0x060a, revid=0x07
bus=2, slot=11, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
pcib2: matched entry for 2.11.INTA (src \\_SB_.LNKA:0)
pcib2: slot 11 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x1179, dev=0x060a, revid=0x07
bus=2, slot=11, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
pcib2: matched entry for 2.11.INTB (src \\_SB_.LNKB:0)
pcib2: slot 11 INTB routed to irq 11 via \\_SB_.LNKB
found-> vendor=0x1179, dev=0x0805, revid=0x03
bus=2, slot=13, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fcefee00, size 9, enabled
pcib2: (null) requested memory range 0xfcefee00-0xfcefefff: good
pcib2: matched entry for 2.13.INTA (src \\_SB_.LNKA:0)
pcib2: slot 13 INTA routed to irq 11 via \\_SB_.LNKA
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem 0xfceff000-0xfcefffff irq 11 at device 8.0 on pci2
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfceff000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1031 1179 0001 0042
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:00:39:a1:83:e7
fxp0: [MPSAFE]
wi0: <Intersil Prism2.5> mem 0xdbdff000-0xdbdfffff irq 11 at device 10.0 on pci2
wi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdbdff000
wi0: [MPSAFE]
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9)
wi0: bpf attached
wi0: Ethernet address: 00:02:6f:35:90:83
wi0: bpf attached
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.0 on pci2
pcib2: cbb0 requested memory range 0xfce00000-0xfcefffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xfce00000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x060a1179 0x04900007 0x06070007 0x00824000
0x10: 0xfce00000 0x04800080 0x00040402 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00010001 0x00800000 0x00000000 0x01000000
0x90: 0x00000001 0x00000000 0x00000000 0x00000000
0xa0: 0x860010f0 0x0c000000 0x00000000 0x0000d100
0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00040000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.1 on pci2
pcib2: cbb1 requested memory range 0xfce00000-0xfcefffff: good
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xfce01000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0x060a1179 0x04900007 0x06070007 0x00824000
0x10: 0xfce01000 0x04800080 0x00050502 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00010001 0x00800000 0x00000000 0x01000000
0x90: 0x00000001 0x00000000 0x00000000 0x00000000
0xa0: 0x860020f0 0x0c000000 0x00000000 0x0000d100
0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00040000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
pci2: <base peripheral> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xcfa0-0xcfaf irq 11 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcfa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pcm0: <Intel ICH3 (82801CA)> port 0xce00-0xceff,0xcdc0-0xcdff irq 11 at device 31.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xce00
pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xcdc0
pcm0: [MPSAFE]
pcm0: <Yamaha YMF753 AC97 Codec (id = 0x594d4803)>
pcm0: Codec features 18 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features reserved 1, AMAP, reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 2ec13000, 4000; 0xde376000 -> 2ec13000
pcm0: sndbuf_setmap 2ec0f000, 4000; 0xde37a000 -> 2ec0f000
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1993532168 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
battery1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
atapicam: atapicam0 already exists; skipping it
ad0: setting PIO4 on ICH3 chip
ad0: setting UDMA100 on ICH3 chip
ad0: 57231MB <TOSHIBA MK6021GAS GA023A> at ata0-master UDMA100
ad0: 117210240 sectors [116280C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
acd0: setting PIO4 on ICH3 chip
acd0: setting UDMA33 on ICH3 chip
acd0: <QSI DVD+/-RW SDW-082K/PX45> DVDR drive at ata1 as master
acd0: read 2067KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 32 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM unknown
pcm0: measured ac97 link rate at 48013 Hz, will use 48000 Hz
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <QSI DVD+-RW SDW-082K PX45> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
GEOM: new disk cd0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QSI DVD+-RW SDW-082K PX45> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
linprocfs registered
fxp0: link state changed to UP
battery1: battery initialization failed, giving up
// acpiconf -s S3
pci2:8:0: Transition from D0 to D3
pci2:10:0: Transition from D0 to D3
vga0: saving 2052 bytes of video state
// Power button actuated
======== acpi_printcpu() debug dump ========
gdt[0097:c06cf980] idt[07ff:c06cfda0] ldt[0050] tr[0048] efl[00080082]
eax[00000001] ebx[c40c6200] ecx[c402f570] edx[0009e227]
esi[00000003] edi[00000000] ebp[dfe65c1c] esp[dfe65c00]
cr0[8005003b] cr2[0804a32c] cr3[2eee4000] cr4[00000691]
cs[0020] ds[0028] es[0028] fs[0008] gs[001b] ss[0028]
======== acpi_printcpu() debug dump ========
gdt[0097:c06cf980] idt[07ff:c06cfda0] ldt[0050] tr[0048] efl[00000002]
eax[00000001] ebx[c40c6200] ecx[000000a0] edx[c42b4300]
esi[00000003] edi[00000000] ebp[dfe65c1c] esp[dfe65c00]
cr0[8005003b] cr2[0804a32c] cr3[2eee4000] cr4[00000691]
cs[0020] ds[0028] es[0028] fs[0008] gs[001b] ss[0028]
cbb0: [MPSAFE]
cbb1: [MPSAFE]
wakeup from sleeping state (slept 00:04:16)
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=80 ostat1=80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x80 err=0x80 lsb=0x80 msb=0x80
ata0: stat0=0x50 err=0x00 lsb=0xfe msb=0x3f
ata0: stat1=0x00 err=0x00 lsb=0xfe msb=0x3f
ata0: reset tp2 stat0=50 stat1=00 devices=0x0
ad0: detached
ata0: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
g_vfs_done():ad0s2a[WRITE(offset=3744169984, length=16384)]error = 6
g_vfs_done():ad0s2a[WRITE(offset=3744169984, length=16384)]error = 6
g_vfs_done():ad0s2a[WRITE(offset=3744169984, length=16384)]error = 6
g_vfs_done():ad0s2a[WRITE(offset=3744169984, length=16384)]error = 6
g_vfs_done():ad0s2a[WRITE(offset=3744169984, length=16384)]error = 6
g_vfs_done():ad0s2a[WRITE(offset=3744169984, length=16384)]error = 6
g_vfs_done():ad0s2a[WRITE(offset=3744169984, length=16384)]error = 6
g_vfs_done():ad0s2a[WRITE(offset=3744169984, length=16384)]error = 6
g_vfs_done():ad0s2a[WRITE(offset=3744169984, length=16384)]error = 6
g_vfs_done():ad0s2a[WRITE(offset=3744169984, length=16384)]error = 6
acd0: setting PIO4 on ICH3 chip
acd0: setting UDMA33 on ICH3 chip
ata1: reinit done ..
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
battery1: battery initialization start
g_vfs_done():ad0s2a[READ(offset=3698522112, length=2048)]error = 6
panic: vinvalbuf: dirty bufs
Uptime: 10m56s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Rebooting...
The ASL output from acpidump(8):
<http://eng.utoledo.edu/~grafe/pub/tsp6100a.asl.txt>;
Note that APM suspend (apm -z) & resume work properly on this system.
Output of "verbose" dmesg(8) for APM-based suspend/resume cycle:
// boot -v (APM & USB kernel)
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun Dec 17 19:46:53 EST 2006
root@tsp6100a:/usr/src/sys/i386/compile/TSP6100D
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0773000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc07731ec.
Calibrating clock(s) ... i8254 clock: 1193187 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1993537460 Hz
CPU: Intel(R) Pentium(R) 4 Mobile CPU 2.00GHz (1993.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 804519936 (767 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x000000002f18afff, 781606912 bytes (190822 pages)
avail memory = 782176256 (745 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0260
bios32: Entry = 0xfc140 (c00fc140) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xd5ad
pnpbios: Found PnP BIOS data at 0xc00f0470
pnpbios: Entry = f0000:9138 Rev = 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 5937f351
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
io: <I/O>
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00
00 01 00 02 17 04 07 01 00 01 1a 01 00 01 28 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 06 01
07 01 0e 01 0f 01 11 01 12 01 14 01 15 01 17 01
VESA: 30 mode(s) found
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc06d47e2 (1000022)
VESA: NVidia
VESA: NVidia Corporation NV17 () Board Chip Rev A2
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00f01d0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 31 A 0x62 11
embedded 0 31 B 0x61 11
embedded 0 29 A 0x60 11
embedded 0 29 B 0x63 11
embedded 0 29 C 0x62 11
embedded 2 11 A 0x60 11
embedded 2 11 B 0x61 11
embedded 2 8 A 0x68 11
embedded 1 0 A 0x6a 10
embedded 2 10 A 0x6b 11
embedded 2 10 B 0x69 11
embedded 2 13 A 0x60 11
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x62 255 N 2 11
0x61 255 N 2 11
0x60 255 N 3 11
0x63 255 N 1 11
0x68 255 N 1 11
0x6a 255 N 1 10
0x6b 255 N 1 11
0x69 255 N 1 11
$PIR: Found matching pin for 0.31.INTA at func 1: 11
$PIR: Found matching pin for 0.31.INTB at func 5: 11
$PIR: Found matching pin for 0.29.INTA at func 0: 11
$PIR: Found matching pin for 0.29.INTB at func 1: 11
$PIR: Found matching pin for 0.29.INTC at func 2: 11
$PIR: Found matching pin for 2.11.INTA at func 0: 11
$PIR: Found matching pin for 2.11.INTB at func 1: 11
$PIR: Found matching pin for 2.8.INTA at func 0: 11
$PIR: Found matching pin for 1.0.INTA at func 0: 10
$PIR: Found matching pin for 2.10.INTA at func 0: 11
$PIR: Found matching pin for 2.13.INTA at func 0: 11
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x62 11 N 2 11
0x61 11 N 2 11
0x60 11 N 3 11
0x63 11 N 1 11
0x68 11 N 1 11
0x6a 10 N 1 10
0x6b 11 N 1 11
0x69 11 N 1 11
$PIR: IRQs used by BIOS: 10 11
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 0 0 0 0 0 1 11 0 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x1a30, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x1a31, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2482, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000efe0, size 5, enabled
$PIR: 0:29 INTA routed to irq 11
found-> vendor=0x8086, dev=0x2484, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 0000ef80, size 5, enabled
$PIR: 0:29 INTB routed to irq 11
found-> vendor=0x8086, dev=0x2487, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type 4, range 32, base 0000ef60, size 5, enabled
$PIR: 0:29 INTC routed to irq 11
found-> vendor=0x8086, dev=0x2448, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248a, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 0000cfa0, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, enabled
$PIR: 0:31 INTA routed to irq 11
found-> vendor=0x8086, dev=0x2485, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type 4, range 32, base 0000ce00, size 8, enabled
map[14]: type 4, range 32, base 0000cdc0, size 6, enabled
$PIR: 0:31 INTB routed to irq 11
found-> vendor=0x8086, dev=0x2486, revid=0x02
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type 4, range 32, base 0000ca00, size 8, enabled
map[14]: type 4, range 32, base 0000c980, size 7, enabled
$PIR: 0:31 INTB routed to irq 11
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfd000000-0xfdffffff
pcib1: prefetched decode 0xdbf00000-0xdfffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x10de, dev=0x0175, revid=0xa3
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib1: (null) requested memory range 0xfd000000-0xfdffffff: good
map[14]: type 3, range 32, base dc000000, size 26, enabled
pcib1: (null) requested memory range 0xdc000000-0xdfffffff: good
map[18]: type 3, range 32, base dbf80000, size 19, enabled
pcib1: (null) requested memory range 0xdbf80000-0xdbffffff: good
$PIR: 1:0 INTA routed to irq 10
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 5
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfce00000-0xfcefffff
pcib2: prefetched decode 0xdbd00000-0xdbdfffff
pcib2: Subtractively decoded bridge.
pci2: <PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x8086, dev=0x1031, revid=0x42
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fceff000, size 12, enabled
pcib2: (null) requested memory range 0xfceff000-0xfcefffff: good
map[14]: type 4, range 32, base 0000df40, size 6, enabled
pcib2: (null) requested I/O range 0xdf40-0xdf7f: in range
$PIR: 2:8 INTA routed to irq 11
found-> vendor=0x1260, dev=0x3873, revid=0x01
bus=2, slot=10, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base dbdff000, size 12, enabled
pcib2: (null) requested memory range 0xdbdff000-0xdbdfffff: good
$PIR: 2:10 INTA routed to irq 11
found-> vendor=0x1179, dev=0x060a, revid=0x07
bus=2, slot=11, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
$PIR: 2:11 INTA routed to irq 11
found-> vendor=0x1179, dev=0x060a, revid=0x07
bus=2, slot=11, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
$PIR: 2:11 INTB routed to irq 11
found-> vendor=0x1179, dev=0x0805, revid=0x03
bus=2, slot=13, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fcefee00, size 9, enabled
pcib2: (null) requested memory range 0xfcefee00-0xfcefefff: good
$PIR: 2:13 INTA routed to irq 11
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem 0xfceff000-0xfcefffff irq 11 at device 8.0 on pci2
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfceff000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1031 1179 0001 0042
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:00:39:a1:83:e7
fxp0: [MPSAFE]
wi0: <Intersil Prism2.5> mem 0xdbdff000-0xdbdfffff irq 11 at device 10.0 on pci2
wi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdbdff000
wi0: [MPSAFE]
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9)
wi0: bpf attached
wi0: Ethernet address: 00:02:6f:35:90:83
wi0: bpf attached
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.0 on pci2
pcib2: cbb0 requested memory range 0xfce00000-0xfcefffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xfce00000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x060a1179 0x04900007 0x06070007 0x00824000
0x10: 0xfce00000 0x04800080 0x00040402 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00010001 0x00800000 0x00000000 0x01000000
0x90: 0x00000001 0x00000000 0x00000000 0x00000000
0xa0: 0x860010f0 0x0c000000 0x00000000 0x0000d100
0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00040000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 11.1 on pci2
pcib2: cbb1 requested memory range 0xfce00000-0xfcefffff: good
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xfce01000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0x060a1179 0x04900007 0x06070007 0x00824000
0x10: 0xfce01000 0x04800080 0x00050502 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b
0x40: 0x00011179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00010001 0x00800000 0x00000000 0x01000000
0x90: 0x00000001 0x00000000 0x00000000 0x00000000
0xa0: 0x860020f0 0x0c000000 0x00000000 0x0000d100
0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00040000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
pci2: <base peripheral> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xcfa0-0xcfaf irq 11 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcfa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pcm0: <Intel ICH3 (82801CA)> port 0xce00-0xceff,0xcdc0-0xcdff irq 11 at device 31.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xce00
pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xcdc0
pcm0: [MPSAFE]
pcm0: <Yamaha YMF753 AC97 Codec (id = 0x594d4803)>
pcm0: Codec features 18 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features reserved 1, AMAP, reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 2ec0a000, 4000; 0xde36e000 -> 2ec0a000
pcm0: sndbuf_setmap 2ec06000, 4000; 0xde372000 -> 2ec06000
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
pnpbios: 14 devices, largest 246 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe0000-0xeffff, size=0x10000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x2ff3ffff, size=0x2fe40000
PNP0c01: adding fixed memory32 range 0x2ff40000-0x2ff4ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x2ff50000-0x2ffdffff, size=0x90000
PNP0c01: adding fixed memory32 range 0x2ffe0000-0x2fffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfeda0000-0xfedbffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1
PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1
PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 8 device ID PNP0f13 (130fd041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 9 device ID PNP0b00 (000bd041)
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1
PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1
PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1
PNP0c02: adding io range 0xb0-0xb3, size=0x4, align=0x1
PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1
PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1
PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1
PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1
PNP0c02: adding io range 0xe000-0xe07f, size=0x80, align=0x1
PNP0c02: adding io range 0xe080-0xe0ff, size=0x80, align=0x1
PNP0c02: adding io range 0xe400-0xe47f, size=0x80, align=0x1
PNP0c02: adding io range 0xe480-0xe4ff, size=0x80, align=0x1
PNP0c02: adding io range 0xe800-0xe87f, size=0x80, align=0x1
PNP0c02: adding io range 0xe880-0xe8ff, size=0x80, align=0x1
PNP0c02: adding io range 0xec00-0xec7f, size=0x80, align=0x1
PNP0c02: adding io range 0xec80-0xecff, size=0x80, align=0x1
PNP0c02: adding io range 0xeeac-0xeeac, size=0x1, align=0x1
PNP0c02: adding io range 0xee00-0xee7f, size=0x80, align=0x1
PNP0c02: adding io range 0xef00-0xef1f, size=0x20, align=0x1
PNP0c02: adding io range 0xef20-0xef3f, size=0x20, align=0x1
PNP0c02: adding io range 0xeeb0-0xeebf, size=0x10, align=0x1
PNP0c02: adding io range 0xeec0-0xeeff, size=0x40, align=0x1
PNP0c02: adding io range 0x680-0x6ff, size=0x80, align=0x80
PNP0c02: adding irq mask 0x200
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
pnpbios: handle 14 device ID PNP0501 (0105d041)
pnpbios: handle 15 device ID SMCf010 (10f0a34d)
PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
pnpbios: handle 16 device ID PNP0401 (0104d041)
pnpbios: handle 17 device ID PNP0a03 (030ad041)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xeffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff,0xe0000-0xeffff on isa0
speaker0: <PC speaker> at port 0x61 on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <SMCf010> failed to probe on isa0
unknown: <PNP0401> failed to probe at port 0x378-0x37a,0x778-0x77a irq 7 drq 3 on isa0
Device configuration finished.
procfs registered
TSC timecounter disabled: APM enabled.
Timecounter "TSC" frequency 1993537460 Hz quality -1000
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
atapicam: atapicam0 already exists; skipping it
ad0: setting PIO4 on ICH3 chip
ad0: setting UDMA100 on ICH3 chip
ad0: 57231MB <TOSHIBA MK6021GAS GA023A> at ata0-master UDMA100
ad0: 117210240 sectors [116280C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
acd0: setting PIO4 on ICH3 chip
acd0: setting UDMA33 on ICH3 chip
acd0: <QSI DVD+/-RW SDW-082K/PX45> DVDR drive at ata1 as master
acd0: read 2067KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 32 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM unknown
pcm0: measured ac97 link rate at 47989 Hz, will use 48000 Hz
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <QSI DVD+-RW SDW-082K PX45> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
GEOM: new disk cd0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QSI DVD+-RW SDW-082K PX45> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
linprocfs registered
fxp0: link state changed to UP
// apm -z
vga0: saving 2052 bytes of video state
// Power button actuated
pir0: Using 0.31.INTA to route link 0x62 to IRQ 11
pir0: ROUTE_INTERRUPT on resume for link 0x62 failed.
pir0: Using 0.31.INTB to route link 0x61 to IRQ 11
pir0: ROUTE_INTERRUPT on resume for link 0x61 failed.
pir0: Using 0.29.INTA to route link 0x60 to IRQ 11
pir0: Using 0.29.INTB to route link 0x63 to IRQ 11
pir0: ROUTE_INTERRUPT on resume for link 0x63 failed.
pir0: Using 2.8.INTA to route link 0x68 to IRQ 11
pir0: Using 1.0.INTA to route link 0x6a to IRQ 10
pir0: Using 2.10.INTA to route link 0x6b to IRQ 11
cbb0: [MPSAFE]
cbb1: [MPSAFE]
wakeup from sleeping state (slept 00:02:49)
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ad0: setting PIO4 on ICH3 chip
ad0: setting UDMA100 on ICH3 chip
ata0: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
acd0: setting PIO4 on ICH3 chip
acd0: setting UDMA33 on ICH3 chip
ata1: reinit done ..
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
>How-To-Repeat:
Boot with ACPI enabled, suspend with "acpiconf -s S3", resume from suspend.
>Fix:
No known fix at this time.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200612191638.kBJGct1N078689>