Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 19 Mar 2003 09:22:04 -0800 (PST)
From:      Frank Mayhar <frank@exit.com>
To:        Eric Anholt <eta@lclark.edu>
Cc:        frank@exit.com, "Steve O'Hara-Smith" <steve@sohara.org>, ports@FreeBSD.ORG, stable@FreeBSD.ORG
Subject:   Re: HEADSUP: XFree86 4.3.0 update
Message-ID:  <200303191722.h2JHM4ad001132@realtime.exit.com>
In-Reply-To: <1048057470.613.14.camel@leguin>

next in thread | previous in thread | raw e-mail | index | archive | help

--ELM1048094524-1078-0_
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=US-ASCII

Eric Anholt wrote:
> Again, as I said in the message that began this thread, it is not going
> to be updated.  Follow the instructions at my DRI site to get the MFC of
> the DRM (which supports that card) to -stable.

Okay, well, I did this.  And.  After a couple of false starts, I got the
proper kernel in, made sure all the old kernel modules were no longer being
loaded, and rebooted.

It hangs on boot.  Wedges solid, just after printing the aperture size.
It seems to initialize AGP and DRM, but then hangs completely.

This is on a Tyan 2466N-4M motherboard (AMD chipset).  I've attached
dmesg output and my config, if that helps.  I guess I should turn on
DRM_DEBUG and see what comes of it.

If there's any further info I can provide, please let me know.
-- 
Frank Mayhar frank@exit.com	http://www.exit.com/
Exit Consulting                 http://www.gpsclock.com/

--ELM1048094524-1078-0_
Content-Transfer-Encoding: 7bit
Content-Type: text/plain
Content-Disposition: attachment; filename=REALTIME
Content-Description: 

#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration -> 
# Configuring the FreeBSD Kernel -> The Configuration File. 
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server 
# <URL:http://www.FreeBSD.ORG/>;
#
# An exhaustive list of options and more detailed explanations of the 
# device lines is present in the ./LINT configuration file. If you are 
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
#	$Id: GENERIC,v 1.140 1998/12/27 13:55:47 sos Exp $

machine		i386
cpu		"I686_CPU"
ident		REALTIME
maxusers	0

options		CPU_ENABLE_SSE

#options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
#options 	INET6			#IPv6 communications protocols
options		FFS			#Berkeley Fast Filesystem
options		FFS_ROOT		#FFS usable as root device [keep this!]
options		NFS			#Network Filesystem
options		MFS			#Memory Filesystem
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options		UCONSOLE		#Allow users to grab the console
options		USERCONFIG		#boot -c editor
options		VISUAL_USERCONFIG	#visual boot -c editor
options		SOFTUPDATES
options		USER_LDT		#allow user-level control of i386 ldt
options 	MROUTING		# Multicast routing
options		RANDOM_IP_ID

options		"P1003_1B"
options		"_KPOSIX_PRIORITY_SCHEDULING"
options		_KPOSIX_VERSION=199309L

#options		PPS_SYNC

options		IPSEC
options		IPSEC_ESP

options COMPAT_LINUX
options DRM_LINUX

config		kernel

options		DDB			#kernel debugger
options		DDB_UNATTENDED		#Recover from panics.

# To make an SMP kernel, the next two are needed
options	SMP			# Symmetric MultiProcessor Kernel
options	APIC_IO			# Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options	NCPU=2			# number of CPUs
#options	NBUS=3			# number of busses
#options	NAPIC=1			# number of IO APICs
#options	NINTR=24		# number of INTs

device	isa0
device	pci0

# AGP GART support
#
device		agp

device	fdc0	at isa? port "IO_FD1" irq 6 drq 2
device		fd0	at fdc0 drive 0
device		fd1	at fdc0 drive 1

#
# The 'ATA' driver supports all ATA and ATAPI devices.
# It can reuse the majors of wd.c for booting purposes.
# You only need one "device ata" for it to find all
# PCI ATA/ATAPI devices on modern machines.
#device		ata
#device		atadisk		# ATA disk drives
#device		atapicd		# ATAPI CDROM drives
#device		atapifd		# ATAPI floppy drives
#device		atapist		# ATAPI tape drives

# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
device		ahc0		# AHA2940 and onboard AIC7xxx devices
device		ahc1		# AHA2940 and onboard AIC7xxx devices
device		ahc2		# AHA2940 and onboard AIC7xxx devices
device		ahc3		# AHA2940 and onboard AIC7xxx devices
device		ahc4		# AHA2940 and onboard AIC7xxx devices
#device		sym0		# NCR/Symbios Logic (newer chipsets)
#device		sym1		# NCR/Symbios Logic (newer chipsets)

# This controller offers a number of configuration options, too many to
# document here  - see the LINT file in this directory and look up the
# dpt0 entry there for much fuller documentation on this.
#device		dpt0

device		scbus0 at ahc0
device		scbus1 at ahc1
device		scbus2 at ahc2
device		scbus3 at ahc3
device		scbus4 at ahc4

device		da0 at scbus0 target 0
device		da1 at scbus0 target 1
device		da2 at scbus0 target 2
device		da3 at scbus0 target 3
device		da4 at scbus0 target 4
device		da5 at scbus0 target 5
device		da6 at scbus0 target 6
device		da8 at scbus0 target 8
device		da9 at scbus0 target 9
device		da10 at scbus0 target 10
device		da11 at scbus0 target 11
device		da12 at scbus0 target 12
device		da13 at scbus0 target 13
device		da14 at scbus0 target 14
device		da15 at scbus0 target 15
device		da100 at scbus1 target 0
device		da101 at scbus1 target 1
device		da102 at scbus1 target 2
device		da103 at scbus1 target 3
device		da104 at scbus1 target 4
device		da105 at scbus1 target 5
device		da106 at scbus1 target 6
device		da108 at scbus1 target 8
device		da109 at scbus1 target 9
device		da110 at scbus1 target 10
device		da111 at scbus1 target 11
device		da112 at scbus1 target 12
device		da113 at scbus1 target 13
device		da114 at scbus1 target 14
device		da115 at scbus1 target 15
device		da200 at scbus2 target 0
device		da201 at scbus2 target 1
device		da202 at scbus2 target 2
device		da203 at scbus2 target 3
device		da204 at scbus2 target 4
device		da205 at scbus2 target 5
device		da206 at scbus2 target 6
device		da208 at scbus2 target 8
device		da209 at scbus2 target 9
device		da210 at scbus2 target 10
device		da211 at scbus2 target 11
device		da212 at scbus2 target 12
device		da213 at scbus2 target 13
device		da214 at scbus2 target 14
device		da215 at scbus2 target 15
device		da300 at scbus3 target 0
device		da301 at scbus3 target 1
device		da302 at scbus3 target 2
device		da303 at scbus3 target 3
device		da304 at scbus3 target 4
device		da305 at scbus3 target 5
device		da306 at scbus3 target 6
device		da308 at scbus3 target 8
device		da309 at scbus3 target 9
device		da310 at scbus3 target 10
device		da311 at scbus3 target 11
device		da312 at scbus3 target 12
device		da313 at scbus3 target 13
device		da314 at scbus3 target 14
device		da315 at scbus3 target 15
device		da400 at scbus4 target 0
device		da401 at scbus4 target 1
device		da402 at scbus4 target 2
device		da403 at scbus4 target 3
device		da404 at scbus4 target 4
device		da405 at scbus4 target 5
device		da406 at scbus4 target 6
device		da408 at scbus4 target 8
device		da409 at scbus4 target 9
device		da410 at scbus4 target 10
device		da411 at scbus4 target 11
device		da412 at scbus4 target 12
device		da413 at scbus4 target 13
device		da414 at scbus4 target 14
device		da415 at scbus4 target 15
#device		sa0 at scbus3 target 6
#device		sa1 at scbus3 target 5
#device		cd0 at scbus1 target 3
#device		cd1 at scbus1 target 1
#device		cd2 at scbus1 target 4
device		sa
device		cd
device		pass
device		pt
device		ses

options		SCSI_DELAY=8000

options		PNPBIOS
device		pcm
device		sbc
#device		pcm0 at isa? port ? tty irq ? drq ? flags 0x0 vector pcmintr 

# atkbdc0 controlls both the keyboard and the PS/2 mouse
device		atkbdc0 at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1
device		psm0	at atkbdc? irq 12
device		vga0	at isa? port ?

# splash screen/screen saver
pseudo-device	splash

# The syscons console driver (sco color console compatible).
device		sc0	at isa?
options		MAXCONS=4

device		npx0	at nexus? port IO_NPX flags 0x0 irq 13

#
# Laptop support (see LINT for more options)
#
device		apm0	at nexus?	flags 0x0020 # Advanced Power Management

device		sio0	at isa? port "IO_COM1" flags 0x00010 irq 4
device		sio1	at isa? port "IO_COM2" flags 0x00000 irq 3

#device		ppbus
#device		lpt
#device		ppc0	at isa? port? irq 7
#device		plip
#device		ppi
#device		pps
#device		lpbb

device	smbus
# intpm Intel PIIX4 Power Management Unit
device		intpm0
device		smb

device		iicbus
device		iicbb

device		ic
device		iic
device		iicsmb
device		bktr

device		iicbus		# Bus support, required for ic/iic/iicsmb below.
device		iicbb

device		ic
device		iic
device		iicsmb		# smb over i2c bridge

device		miibus0		# MII bus support
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

pseudo-device	loop
pseudo-device	ether
#pseudo-device	sl	1
#pseudo-device	ppp	1
pseudo-device	tun
pseudo-device	pty
pseudo-device	gzip		# Exec gzipped a.out's
pseudo-device	vn
pseudo-device	streams
# for IPv6
pseudo-device	gif			#IPv6 and IPv4 tunneling
#pseudo-device	faith	1		#for IPv6 and IPv4 translation
#pseudo-device	stf			#6to4 IPv6 over IPv4 encapsulation

# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options		KTRACE		#kernel tracing

# This provides support for System V shared memory.
#
options		SYSVSHM
options		SYSVSEM
options		SYSVMSG

options 	SHMMAXPGS=8192	# max amount of shared memory pages (4k on i386)
options 	SHMALL=8192	# max amount of shared memory (bytes)
options 	SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)"
				# max shared memory segment size (bytes)
options 	SHMMIN=2	# min shared memory segment size (bytes)
options 	SHMMNI=129	# max number of shared memory identifiers
options 	SHMSEG=65	# max shared memory segments per process
options		SEMMAP=128	# amount of entries in semaphore map
options		SEMMNI=128	# number of semaphore identifiers in the system
options		SEMMNS=256	# number of semaphores in the system
options		SEMMNU=128	# number of undo structures in the system
options		SEMMSL=128	# max number of semaphores per id
options		SEMOPM=202	# max number of operations per semop call
options		SEMUME=64	# max number of undo entries per process


pseudo-device	bpf		#Berkeley packet filter


# USB support
device		uhci
device		ohci
device		usb
#
# for the moment we have to specify the priorities of the device
# drivers explicitly by the ordering in the list below. This will
# be changed in the future.
#
# Generic USB device driver
device	ugen
# Human Interface Device (anything with buttons and dials)
device	uhid
# USB keyboard
device	ukbd
# USB printer
device	ulpt
# USB Iomega Zip 100 Drive
device	umass
# USB mouse
device	ums
# Rio 500
#device urio

#options	USB_DEBUG

device radeondrm

--ELM1048094524-1078-0_
Content-Transfer-Encoding: 7bit
Content-Type: text/plain
Content-Disposition: attachment; filename=dmesg.boot
Content-Description: 

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RC #9: Mon Mar 17 12:07:34 PST 2003
    frank@realtime.exit.com:/usr/src/sys/compile/REALTIME
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(tm) MP 1900+ (1600.07-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 2146959360 (2096640K bytes)
avail memory = 2086932480 (2038020K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040010, at 0xfee00000
 cpu1 (AP):  apic id:  0, version: 0x00040010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel.old" at 0xc0416000.
Pentium Pro MTRR support enabled
Using $PIR table, 12 entries at 0xc00fdf00
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1022 device=700d)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Radeon QL ATI Radeon 8500 graphics accelerator> at 5.0 irq 11
isab0: <PCI to ISA bridge (vendor=1022 device=7440)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> at 7.1
chip1: <PCI to Other bridge (vendor=1022 device=7443)> at device 7.3 on pci0
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x1000-0x10ff mem 0xc0000000-0xc0000fff irq 5 at device 8.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0x1400-0x14ff mem 0xc0001000-0xc0001fff irq 9 at device 9.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc2: <Adaptec 3960D Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xc0002000-0xc0002fff irq 11 at device 9.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pcib2: <PCI to PCI bridge (vendor=1022 device=7448)> at device 16.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <OHCI (generic) USB controller> mem 0xc0200000-0xc0200fff irq 10 at device 0.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcm0: <Creative EMU10K1> port 0x3080-0x309f irq 5 at device 4.0 on pci2
pcm0: <TriTech TR28023 ac97 codec>
bktr0: <BrookTree 878> mem 0xc0600000-0xc0600fff irq 9 at device 5.0 on pci2
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
smb0: <SMBus general purpose I/O> on smbus0
iic0: <I2C general purpose I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb0 master-only
iicsmb1: <I2C to SMB bridge> on iicbus1
smbus1: <System Management Bus> on iicsmb1
smb1: <SMBus general purpose I/O> on smbus1
iic1: <I2C general purpose I/O> on iicbus1
smbus2: <System Management Bus> on bti2c0
smb2: <SMBus general purpose I/O> on smbus2
bktr0: Hauppauge Model 37281 B223
bktr0: Detected a MSP3430G-A1 at 0x80
bktr0: Detected a DPL3418A-A2 at 0x84
bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c stereo, dpl3518a dolby, remote control.
pci2: <unknown card> (vendor=0x109e, dev=0x0878) at 5.1 irq 9
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x3000-0x307f mem 0xc0201000-0xc020107f irq 10 at device 8.0 on pci2
xl0: Ethernet address: 00:e0:81:20:cc:de
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcd7ff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <4 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
unknown: <PNP0c01> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0c02> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
IPsec: Initialized Security Association Processing.
Waiting 8 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <Seagate STT20000N 6A51> Removable Sequential Access SCSI-2 device 
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
da0 at ahc0 bus 0 target 0 lun 0
da0: <FUJITSU MAF3364L SUN36G 1213> Fixed Direct Access SCSI-2 device 
da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 34732MB (71132959 512 byte sectors: 64H 32S/T 34732C)
da9 at ahc0 bus 0 target 9 lun 0
da9: <QUANTUM ATLAS IV 18 WLS 0909> Fixed Direct Access SCSI-3 device 
da9: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da9: 17522MB (35885168 512 byte sectors: 64H 32S/T 17522C)
da4 at ahc0 bus 0 target 4 lun 0
da4: <FUJITSU MAF3364L SUN36G 1213> Fixed Direct Access SCSI-2 device 
da4: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da4: 34732MB (71132959 512 byte sectors: 64H 32S/T 34732C)
da12 at ahc0 bus 0 target 12 lun 0
da12: <QUANTUM ATLAS_V_36_WLS 0200> Fixed Direct Access SCSI-3 device 
da12: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da12: 35020MB (71722776 512 byte sectors: 64H 32S/T 35020C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <HP 36.4GB A 80-F313 > Fixed Direct Access SCSI-2 device 
da2: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 34732MB (71132960 512 byte sectors: 64H 32S/T 34732C)
da8 at ahc0 bus 0 target 8 lun 0
da8: <FUJITSU MAF3364L SUN36G 1213> Fixed Direct Access SCSI-2 device 
da8: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da8: 34732MB (71132959 512 byte sectors: 64H 32S/T 34732C)
da100 at ahc1 bus 0 target 0 lun 0
da100: <QUANTUM ATLAS_V_36_WLS 0230> Fixed Direct Access SCSI-3 device 
da100: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da100: 35020MB (71722776 512 byte sectors: 64H 32S/T 35020C)
da104 at ahc1 bus 0 target 4 lun 0
da104: <QUANTUM ATLAS IV 36 SCA 0B0B> Fixed Direct Access SCSI-3 device 
da104: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da104: 35044MB (71770336 512 byte sectors: 64H 32S/T 35044C)
da103 at ahc1 bus 0 target 3 lun 0
da103: <IBM DXHS36D 0290> Fixed Direct Access SCSI-3 device 
da103: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da103: 34732MB (71132960 512 byte sectors: 64H 32S/T 34732C)
da101 at ahc1 bus 0 target 1 lun 0
da101: <IBM IC35L036UWD210-0 S5BS> Fixed Direct Access SCSI-3 device 
da101: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da101: 35003MB (71687340 512 byte sectors: 64H 32S/T 35003C)
da208 at ahc2 bus 0 target 8 lun 0
da208: <QUANTUM ATLAS 10K 36WLS UCP0> Fixed Direct Access SCSI-3 device 
da208: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da208: 35037MB (71755944 512 byte sectors: 64H 32S/T 35037C)
da209 at ahc2 bus 0 target 9 lun 0
da209: <QUANTUM ATLAS 10K 36WLS UCP0> Fixed Direct Access SCSI-3 device 
da209: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da209: 35037MB (71755944 512 byte sectors: 64H 32S/T 35037C)
da210 at ahc2 bus 0 target 10 lun 0
da210: <QUANTUM ATLAS 10K 36WLS UCH0> Fixed Direct Access SCSI-3 device 
da210: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da210: 35037MB (71755944 512 byte sectors: 64H 32S/T 35037C)
da106 at ahc1 bus 0 target 6 lun 0
da106: <QUANTUM ATLAS IV 36 SCA 0B0B> Fixed Direct Access SCSI-3 device 
da106: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da106: 35044MB (71770336 512 byte sectors: 64H 32S/T 35044C)
da105 at ahc1 bus 0 target 5 lun 0
da105: <TANDEM 4636-A\\003,\\0043\\333\\361\\0043\\3603 0271> Fixed Direct Access SCSI-2 device 
da105: 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
da105: 34430MB (70512692 512 byte sectors: 64H 32S/T 34430C)
da102 at ahc1 bus 0 target 2 lun 0
da102: <IBM DXHS36D 0290> Fixed Direct Access SCSI-3 device 
da102: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da102: 34732MB (71132960 512 byte sectors: 64H 32S/T 34732C)
da108 at ahc1 bus 0 target 8 lun 0
da108: <IBM DXHS36D 02A0> Fixed Direct Access SCSI-3 device 
da108: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da108: 34732MB (71132960 512 byte sectors: 64H 32S/T 34732C)
da214 at ahc2 bus 0 target 14 lun 0
da214: <HITACHI DK32DJ-72MC A9A9> Fixed Direct Access SCSI-3 device 
da214: 160.000MB/s transfers (80.000MHz, offset 100, 16bit), Tagged Queueing Enabled
da214: 70513MB (144410880 512 byte sectors: 64H 32S/T 4977C)
da115 at ahc1 bus 0 target 15 lun 0
da115: <IBM-PSG DRHS36D       !# 0272> Fixed Direct Access SCSI-3 device 
da115: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da115: 34715MB (71096640 512 byte sectors: 64H 32S/T 34715C)
da114 at ahc1 bus 0 target 14 lun 0
da114: <SEAGATE SX150176LC BA12> Fixed Direct Access SCSI-2 device 
da114: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da114: 47702MB (97693755 512 byte sectors: 64H 32S/T 47702C)
da213 at ahc2 bus 0 target 13 lun 0
da213: <IBM DXHS36D 02A0> Fixed Direct Access SCSI-3 device 
da213: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da213: 34732MB (71132960 512 byte sectors: 64H 32S/T 34732C)
da113 at ahc1 bus 0 target 13 lun 0
da113: <SEAGATE SX150176LC BA0F> Fixed Direct Access SCSI-2 device 
da113: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da113: 47702MB (97693755 512 byte sectors: 64H 32S/T 47702C)
da212 at ahc2 bus 0 target 12 lun 0
da212: <IBM DXHS36D 02A0> Fixed Direct Access SCSI-3 device 
da212: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da212: 34732MB (71132960 512 byte sectors: 64H 32S/T 34732C)
da211 at ahc2 bus 0 target 11 lun 0
da211: <IBM DXHS36D 02A0> Fixed Direct Access SCSI-3 device 
da211: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da211: 34732MB (71132960 512 byte sectors: 64H 32S/T 34732C)
cd0 at ahc0 bus 0 target 1 lun 0
cd0: <TOSHIBA DVD-ROM SD-M1401 1007> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 3 lun 0
cd1: <YAMAHA CRW8424S 1.0j> Removable CD-ROM SCSI-2 device 
cd1: 20.000MB/s transfers (20.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Mounting root from ufs:/dev/da000s1a

--ELM1048094524-1078-0_--

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200303191722.h2JHM4ad001132>