Date: Thu, 29 Oct 98 14:38:35 +0100 From: David Wetzel <dave@turbocat.de> To: ISDN-List <freebsd-isdn@FreeBSD.ORG> Subject: new mainboard - new fun :-( Message-ID: <199810291338.OAA00261@cat.turbocat.de>
next in thread | raw e-mail | index | archive | help
Hi,
yesterday, I purchased some work because I could not sleep ;-)
NetBSD 1.3.2 (TURBOALICE) #0: Wed Dec 31 18:32:44 PST 1997
root@:/usr/src/sys/arch/i386/compile/TURBOALICE
cpu0: family 6 model 5 step 0
cpu0: Intel Pentium Pro (686-class)
real mem = 133824512
avail mem = 130359296
using 1659 buffers containing 6795264 bytes of memory
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
Intel product 0x7190 (host bridge, revision 0x02) at pci0 dev 0 function 0
not configured
Intel product 0x7191 (PCI bridge, revision 0x02) at pci0 dev 1 function 0
not configured
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
Intel 82371AB IDE controller (PIIX4) (IDE mass storage, interface 0x80,
revision 0x01) at pci0 dev 7 function 1 not configured
Intel 82371AB USB Host Controller (PIIX4) (USB serial bus, revision 0x01) at
pci0 dev 7 function 2 not configured
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge,
revision 0x02) at pci0 dev 7 function 3 not configured
S3 Trio32/64 (VGA display) at pci0 dev 8 function 0 not configured
de0 at pci0 dev 9 function 0
de0: interrupting at irq 9
de0: 21041 [10Mb/s] pass 2.1
de0: address 00:40:05:50:c9:0c
ahc0 at pci0 dev 12 function 0
ahc0: interrupting at irq 15
ahc0: Using left over BIOS settings
ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs
scsibus0 at ahc0 channel 0: 16 targets
ahc0: target 0 using 16Bit transfers
ahc0: target 0 synchronous at 10.0MHz, offset = 0x8
sd0 at scsibus0 targ 0 lun 0: <IBM, DDRS-34560W, S97B> SCSI2 0/direct fixed
sd0: 4357MB, 8387 cyl, 5 head, 212 sec, 512 bytes/sect x 8925000 sectors
ahc0: target 1 using 16Bit transfers
ahc0: target 1 synchronous at 10.0MHz, offset = 0x8
sd1 at scsibus0 targ 1 lun 0: <IBM, DDRS-34560W, S97B> SCSI2 0/direct fixed
sd1: 4357MB, 8387 cyl, 5 head, 212 sec, 512 bytes/sect x 8925000 sectors
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
biomask 8040 netmask 8240 ttymask 8242
boot device: sd0
root on sd0a dumps on sd0b
On what shall I jumper the Teles? I used this in my old computer:
#options TEL_S0_16
isic0 at isa? port 0xe80 iomem 0xc8000 irq 11
but when I use a kernel with Teles support, I get error messages on the
console. This is too fast for my eyes. I am not an alien.
The computer hangs and the screen seems to be running at 200 lines / sec...
Thanks
---
_ _
_(_)(_)_ David Wetzel, Turbocat's Development,
(_) __ (_) Buchhorster Strasse, D-16567 Muehlenbeck/Berlin, FRG,
_/ \_ Fax +49 33056 82835 NeXTmail dave@turbocat.de
(______) http://www.turbocat.de/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199810291338.OAA00261>