Date: Sat, 29 Apr 2000 09:53:07 -1000 (HST) From: FreeBSD MAIL <freebsd@mauibuilt.com> To: freebsd-hackers@freebsd.org Subject: Re: Xircom cards Message-ID: <200004291953.JAA08064@mauibuilt.com>
next in thread | raw e-mail | index | archive | help
I cvsuped to 5.0-current and am trying the Xircom driver now.
I want to provide as much information as needed.
below is information on how I built my kernel and various configuration
files.
Upon insertion I get the below message. and although I can see the card with
netstat -in as soon as I run ifconfig it page faults.
Also with -current my second PCMCIA controller dosn't work so I have it
disabled in the kernel config.
Ill keep checking for updated drivers and patches..
Hope this info helps.
I have a Ricoh Majio laptop with 3 PCMCIA slots (2 controllers) which
support cardbus and legacy. I have them in legacy mode.
If there is any more info I should provide please let me know..
Richard Puga
puga@mauibuilt.com
############/etc/pccard.conf########################
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 3 5 10 11 13 15
# Available memory slots
memory 0xd4000 96k
# Xircom CreditCard Ethernet 10/100 + modem (Ethernet part)
card "Xircom" "Ethernet Adapter"
config auto "xe0" 9
insert logger -t pccard:$device -s Xircom CreditCard Modem inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s Xircom CreditCard Modem removed
remove /sbin/ifconfig $device delete
##############INSERTING CARD BEFORE BOOT########################
xe0: xe: Probing
xe0: Got version string (0x15)
xe0: Got card ID (0x20)
xe0: Card is Ethernet only
xe0: Got MAC address (0x22)
xe0 at port 0x240-0x24f iomem 0xd0000-0xd0fff irq 9 slot 1 on pccard1
xe0: attach
xe0: Xircom CE3, bonding version 0x45, 100Mbps capable
xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
xe0: Ethernet address 00:10:a4:f4:fa:e6
xe0: supplying EUI64: 00:10:a4:ff:fe:f4:fa:e6
xe0: BPF listener attached
device_probe_and_attach: xe0 attach returned 1
##############INSERTING CARD AFTER BOOT########################
ricoh /root 6% pccard: card inserted, slot 1
Apr 29 10:13:27 ricoh /kernel: pccard: card inserted, slot 1
Apr 29 10:13:27 ricoh /kernel: pccard: card inserted, slot 1
Apr 29 10:13:32 ricoh pccardd[45]: Card "Xircom"("Ethernet Adapter") matched "Xircom" ("Ethernet Adapter")
Apr 29 10:13:32 ricoh pccardd[45]: Card "Xircom"("Ethernet Adapter") matched "Xircom" ("Ethernet Adapter")
Apr 29 10:13:32 ricoh pccardd[45]: Card "Xircom"("Ethernet Adapter") matched "Xircom" ("Ethernet Adapter")
xe0: xe: Probing
xe0: Got version string (0x15)
xe0: Got card ID (0x20)
xe0: Card is Ethernet only
xe0: Got MAC address (0x22)
xe0 at port 0x240-0x24f iomem 0xd0000-0xd0fff irq 9 slot 1 on pccard1
xe0: attach
xe0: Cannot allocate ioport
device_probe_and_attach: xe0 attach returned 12
Apr 29 10:13:38 ricoh /kernel: xe0: xe: Probing
Apr 29 10:13:38 ricoh /kernel: xe0: xe: Probing
Apr 29 10:13:38 ricoh /kernel: xe0: Got version string (0x15)
Apr 29 10:13:38 ricoh /kernel: xe0: Got version string (0x15)
Apr 29 10:13:38 ricoh /kernel: xe0: Got card ID (0x20)
Apr 29 10:13:38 ricoh /kernel: xe0: Got card ID (0x20)
Apr 29 10:13:38 ricoh /kernel: xe0: Card is Ethernet only
Apr 29 10:13:38 ricoh /kernel: xe0: Card is Ethernet only
Apr 29 10:13:38 ricoh /kernel: xe0: Got MAC address (0x22)
Apr 29 10:13:38 ricoh /kernel: xe0: Got MAC address (0x22)
Apr 29 10:13:38 ricoh /kernel: xe0 at port 0x240-0x24f iomem 0xd0000-0xd0fff irq 9 slot 1 on pccard1
Apr 29 10:13:38 ricoh /kernel: xe0 at port 0x240-0x24f iomem 0xd0000-0xd0fff irq 9 slot 1 on pccard1
Apr 29 10:13:38 ricoh /kernel: xe0: attach
Apr 29 10:13:38 ricoh /kernel: xe0: attach
Apr 29 10:13:38 ricoh /kernel: xe0: Cannot allocate ioport
Apr 29 10:13:38 ricoh /kernel: xe0: Cannot allocate ioport
Apr 29 10:13:38 ricoh /kernel: device_probe_and_attach: xe0 attach returned 12
Apr 29 10:13:38 ricoh /kernel: device_probe_and_attach: xe0 attach returned 12
Apr 29 10:13:38 ricoh pccardd[45]: driver allocation failed for Xircom(Ethernet Adapter): Cannot allocate memory
Apr 29 10:13:38 ricoh pccardd[45]: driver allocation failed for Xircom(Ethernet Adapter): Cannot allocate memory
Apr 29 10:13:38 ricoh pccardd[45]: driver allocation failed for Xircom(Ethernet Adapter): Cannot allocate memory
##############KERNEL CONFIG########################
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.freebsd.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.252 2000/04/15 18:46:15 asmodai Exp $
machine i386
cpu I386_CPU
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident GENERIC
maxusers 32
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
#options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=4 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
device isa
#device eisa
device pci
#options COMPAT_OLDISA # Old ISA driver shims
#options COMPAT_OLDPCI # Old PCI driver shims
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
#device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device amd # AMD 53C974 (Teckram DC-390(T))
#device dpt # DPT Smartcache - See LINT for options!
#device isp # Qlogic family
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?
#
# SCSI peripherals
#device scbus # SCSI bus (required)
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
# RAID controllers
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
# Enable this for the pcvt (VT220 compatible) console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device tx # SMC 9432TX (83c170 ``EPIC'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
#device wx # Intel Gigabit Ethernet Card (``Wiseman'')
# PCI Ethernet NICs that use the common MII bus controller code.
device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
device ex
device ep
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
device an
# BayStack 660 and others
device awi
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
#device fe0 at isa? port 0x300
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 irq 10 drq 0
#device cs0 at isa? port 0x300
#device sn0 at isa? port 0x300 irq 10
# Disabled because it is currently broken.
device xe
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf # Berkeley packet filter
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
#device urio # Diamond Rio 500 MP3 player
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
#device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15
device pcm
options IPFILTER #ipfilter support
options IPFILTER_LOG #ipfilter logging
----- End of forwarded message from freebsd -----
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200004291953.JAA08064>