Date: Fri, 31 Mar 2006 23:59:07 GMT From: Marco Kessler <promo@livesets.ch> To: freebsd-gnats-submit@FreeBSD.org Subject: www/95181: amd64 motherboard compatibility report Message-ID: <200603312359.k2VNx7lS051494@www.freebsd.org> Resent-Message-ID: <200604010000.k3100X8c088479@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 95181 >Category: www >Synopsis: amd64 motherboard compatibility report >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-www >State: open >Quarter: >Keywords: >Date-Required: >Class: update >Submitter-Id: current-users >Arrival-Date: Sat Apr 01 00:00:33 GMT 2006 >Closed-Date: >Last-Modified: >Originator: Marco Kessler >Release: 6.1-BETA4 >Organization: none >Environment: FreeBSD 6.1-BETA4 SMP CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2210.07-MHz K8-class CPU) >Description: Hello, I've just tested FreeBSD 6.1-BETA4 on a motherboard which is not yet listed on the amd64 supported motherboards list (http://www.freebsd.org/platforms/amd64/motherboards.html). The board is the Asus A8N32-SLI Deluxe, chipset NVIDIA nForce SPP 100/NVIDIA nForce4 SLI, Socket 939. It's running on a dualcore with a raid0 harddrive configuration (WD raptor). There are no problems with the nvidia NIC (nve0) and the raid controller (NV raid). The other raid controller (Sil 3132) and the Marvell 88E8053 NIC don't seem to be recognized by the kernel. Attached is a dmesg output of my freebsd machine, if you need more infos just let me know what I should report and I'll write again. Thank you for the great effort put in the project, keep it up! Marco Kessler -------------------------------- dmesg output: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-BETA4 #0: Mon Mar 13 19:16:58 UTC 2006 root@x64.samsco.home:/usr/obj/usr/src/sys/SMP ACPI APIC Table: <A M I OEMAPIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2210.07-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f32 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory = 2147155968 (2047 MB) avail memory = 2062561280 (1967 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 1.1> irqs 0-23 on motherboard acpi0: <A M I OEMXSDT> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <mass storage, RAID> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network, ethernet> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <display, VGA> at device 0.0 (no driver attached) pci0: <memory> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 21 at device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 10 ports with 10 removable, self powered ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfebffc00-0xfebffcff irq 22 at device 11.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 10 ports with 10 removable, self powered pci0: <multimedia, audio> at device 13.0 (no driver attached) atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce CK804 SATA300 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfebfc000-0xfebfcfff irq 20 at device 16.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <nVidia nForce CK804 SATA300 controller> port 0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f mem 0xfebfb000-0xfebfbfff irq 21 at device 17.0 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 pcib4: <ACPI PCI-PCI bridge> at device 18.0 on pci0 pci4: <ACPI PCI bus> on pcib4 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfeaff800-0xfeafffff,0xfeaf8000-0xfeafbfff irq 17 at device 11.0 on pci4 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:88:07:7d fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:88:07:7d fwe0: Ethernet address: 02:11:d8:88:07:7d fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xc480-0xc487 mem 0xfebfa000-0xfebfafff irq 22 at device 19.0 on pci0 nve0: Ethernet address 00:15:f2:8a:28:07 miibus0: <MII bus> on nve0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nve0: Ethernet address: 00:15:f2:8a:28:07 pcib5: <ACPI PCI-PCI bridge> at device 22.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 23.0 on pci0 pci6: <ACPI PCI bus> on pcib6 acpi_button0: <Power Button> on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805fae00, 0) error 6 acd0: CDRW <LITE-ON LTR-12101B/LS23> at ata0-master PIO4 ad2: 194481MB <Maxtor 6Y200P0 YAR41BW0> at ata1-master UDMA133 ad3: 194481MB <Maxtor 6Y200P0 YAR41BW0> at ata1-slave UDMA133 ad4: 35304MB <WDC WD360GD-00FLC0 33.08F33> at ata2-master SATA150 ad6: 35304MB <WDC WD360GD-00FLC0 33.08F33> at ata3-master SATA150 ar0: 70609MB <nVidia MediaShield RAID0 (stripe 64 KB)> status: READY ar0: disk0 READY using ad4 at ata2-master ar0: disk1 READY using ad6 at ata3-master SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ar0s1a --------------------------------------------- >How-To-Repeat: n/a >Fix: n/a >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200603312359.k2VNx7lS051494>