Date: Sun, 11 Nov 2018 16:09:49 +0100 From: Luc Hondareyte <hondareyte.luc@laposte.net> To: Emmanuel Vadot <manu@bidouilliste.com> Cc: Luc Hondareyte via freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: u-boot 2018-09 and nano pi air Message-ID: <5a2fb503-10cf-18be-4b64-6b55c2cc54f0@laposte.net> In-Reply-To: <20181111154119.625fcb69377e4fa7111dec48@bidouilliste.com> References: <659cb177-bdb4-54f2-ba77-a03d00af0b25@laposte.net> <20181111154119.625fcb69377e4fa7111dec48@bidouilliste.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Le 11/11/2018 à 15:41, Emmanuel Vadot a écrit : > Hello, > > On Sun, 11 Nov 2018 12:44:25 +0100 > Luc Hondareyte via freebsd-arm <freebsd-arm@freebsd.org> wrote: > >> Hello, >> >> I just tested generics images 12-BETA4 and 13-CURRENT (r340239) with >> u-boot 2018-09 package for nanopi-neo-air. Apparently, the USB stack >> does not work with this release. However, this works with the 2018-09 >> version for nano-pi-neo (not air). I did not have this problem with the >> 2018-03 version. > I doubt that this worked since there is only an otg port and u-boot > (and FreeBSD) doesn't support this. > You made me doubt. I just retry with u-boot 2018-03 (neo air), and actually, the ports do not work. They work with u-boot for neopi. I am talking about the two USB ports on the header, not the OTG port. >> U-Boot SPL 2018.09 (Oct 22 2018 - 20:09:02 +0000) >> DRAM: 512 MiB >> Trying to boot from MMC1 >> >> >> U-Boot 2018.09 (Oct 22 2018 - 20:09:02 +0000) Allwinner Technology >> >> CPU: Allwinner H3 (SUN8I 1680) >> Model: FriendlyARM NanoPi NEO Air >> DRAM: 512 MiB >> MMC: SUNXI SD/MMC: 0 >> Loading Environment from FAT... *** Warning - bad CRC, using default >> environment >> >> In: serial >> Out: serial >> Err: serial >> Net: No ethernet found. >> starting USB... >> No controllers found >> Hit any key to stop autoboot: 0 >> => usb info >> USB is stopped. Please issue 'usb start' first. >> => usb start >> starting USB... >> No controllers found >> >> Another question, what is the status for the eMMC for this board. Here >> is the dmesg with 13-CURRENT r340239: > There is no eMMC defined in the board DTS so it doesn't get probed. > Ok, thanks
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5a2fb503-10cf-18be-4b64-6b55c2cc54f0>