Date: Mon, 13 Apr 1998 11:21:20 -0400 (EDT) From: Chris Martino <chrismar@mail.eclipse.net> To: Doug White <dwhite@resnet.uoregon.edu> Cc: questions@FreeBSD.ORG Subject: Re: Modem Problems Message-ID: <Pine.BSI.3.91.980413111758.5999A-100000@mail.eclipse.net> In-Reply-To: <Pine.BSF.3.96.980413002953.4663P-100000@gdi.uoregon.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
It is COM3 and COM4 or thats what it reports in Win95. Also yes all the
sio's are being probed, I configured the kernel to probe them. Still no
help. I have an old USR Sportster 28.8 that I'm gonna try hooking up to
COM2 and see if that works. I just need to get a cable, which I plan to
do today.
Is there anything special I need to do for USR Sportsters? Cause it has
those DIP Switches in the back. Any special ones need to be down or up?
It is an external.
Thanks again,
Chris
__
+-----------------------------------+
| Chris Martino, Support Technician |
| chrismar@eclipse.net |
+---+-----------------------------------+---+
| _ _ _ |
| ___ ___| (_)_ __ __ ___ _ _ ___| |_ |
| / -_) __| | | '_ \_-< -_)_| ' ` -_) _/ |
| \___\___|_|_| .__/__/___(_)_|_|___|\__) |
| |_| Eclipse Internet Access |
+-------------------------------------------+
| (800) 483-1223 -=- http://www.eclipse.net |
+-------------------------------------------+
On Mon, 13 Apr 1998, Doug White wrote:
> On Sat, 11 Apr 1998, Chris Martino wrote:
>
> > To Whom it may Concern:
> >
> > The other day I installed FreeBSD 2.2.5 on a machine from CD. The
> > installation went very smoothly, as well ass the setup of X and
> > everything else.
> >
> > The only problem we have yet to solve is how to establish a PPP
> > connection. I've printed all the pages in the FAQ and handbook
> > pertaining to the subject, but I still can't seem to get it to work.
> >
> > I'm unsure of the exact modem it is (I can find out if you need it) but I
> > know that it is a Modem/Sound Card combonation. In windows95 it runs on
> > COM3 and COM4.
>
> Both? No, it's usually one or the other.
>
> > In freebsd i know that the corresponding ports for COM3 and 4 is
> > /dev/cuaa2 and /dev/cuaa3 but for somer reason the script won't work with
> > either. When I try to run the script it says "/dev/cuaa2 not configured"
> > and "/dev/cuaa3 not configured" In fact it does that with cuaa1 - cuaa4
> > for some odd reason cuaa0 will let the script run, but the modem doesn't
> > dial or anything.
>
> Check the boot messages and make sure sio3 and sio4 are being probed. If
> not, you'll need to rebuild your kernel to activate them.
>
>
> Doug White | University of Oregon
> Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant
> http://gladstone.uoregon.edu/~dwhite | Computer Science Major
>
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.91.980413111758.5999A-100000>