Date: Sat, 21 Jan 1995 16:23:16 -0500 (EST) From: kduling@gnu.ai.mit.edu To: freebsd-questions@FreeBSD.org Subject: NE2000 clone networking problems Message-ID: <9501212123.AA11216@spiff.gnu.ai.mit.edu>
next in thread | raw e-mail | index | archive | help
Help! I've done everything I can think of, but it still isn't working. I bought a pair of NE2000 clone ethernet cards and I can't get FreeBSD and Trumpet Winsock to talk to each other. They're made by GVC and are 16-bit ISA cards with both T.P. and BNC connectors. I'm using BNC. I know the cards work because the Windows for Workgroups network is working perfectly. I just can't get them to talk using TCP/IP. This is for FreeBSD 1.1.5.1, btw. I'm using the 192.168.250.* address set locally for testing. And my FreeBSD system is also using SLIP to get onto the internet. That part works perfectly. I just can't get my local network working as it should. Also, I don't expect that machines on my local lan will be able to get out over the network. My dialup server only knows about scylla and expects it to be on its subnet. I want scylla to be able to talk on my local net and out over the internet. First, here's a list of addresses: hydra (Dialup SLIP) scylla (FreeBSD) charybdis (Windows) ------------------------------------------------------------------- 192.54.81.8 <-------> 192.54.81.21 192.168.250.21 <-----> 192.168.250.23 And, this is how I configure scylla when I try to start up the network: ifconfig sl0 192.54.81.21 192.54.81.8 slattach -c -s 19200 /dev/cua01 ifconfig ed0 192.168.250.21 up bnc #route add 192.168.250.23 192.168.250.21 route add default 192.54.81.8 -mtu 1500 Charybdis' configuration is a little different, since it's Trumpet Winsock. But here are the particulars: IP Address: 192.168.250.23 Netmask: 255.255.255.0 Gateway: 192.168.250.21 Nameserver: 192.168.250.21 Time Server: 192.168.250.21 An 'ifconfig ed0' will reveal: ed0: flags=867<UP,BROADCAST,DEBUG,NOTRAILERS,RUNNING,SIMPLEX> inet 192.168.250.21 netmask ffffff00 broadcast 192.168.250.255 'netstat -rn' gives: Routing tables Destination Gateway Flags Refs Use IfaceMTU Rtt Netmasks: (root node) (0) 0000 ffff ff00 (root node) Route Tree for Protocol Family inet: (root node) => default 192.54.81.8 UG 3 671 sl0 1500 - 127.0.0.1 127.0.0.1 UH 1 1 lo0 - - 192.54.81.8 192.54.81.21 UH 1 0 sl0 - - 192.54.81.21 127.0.0.1 UGH 0 0 lo0 - - 192.168.250 192.168.250.21 U 1 14 ed0 - - And 'netstat -in' gives: (root node) Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll ed0 1500 <Link>0.0.e8.c5.af.c5 0 0 7 0 0 ed0 1500 192.168.250 192.168.250.21 0 0 7 0 0 lo0 65535 <Link> 2049 0 2049 0 0 lo0 65535 127 127.0.0.1 2049 0 2049 0 0 sl0 296 <Link> 579 0 679 0 0 sl0 296 192.54.81 192.54.81.21 579 0 679 0 0 sl1* 296 <Link> 0 0 0 0 0 Everyone I've talked to and has looked at this has said that it looks right. Regardless, each time I try to ping 192.168.250.23, I have a 100% packet loss. And, if I try to start up Xwindemo (a very nice demo of X under Windows -- works wonderfully) I have ARP timeouts on the Trumpet status window. Debugging that, I see the following messages: 572.2 1024->23 seq 00000000 SYN wind 4096 opt 020405B4 Ether 00:00:E8:C3:29:6F->FF:FF:FF:FF:FF:FF ARP 1 0001 0800 00:00:E8:C3:29:6F:192.168.250.23 ->00:00:00:00:00:00:192.168.250.21 ARP timed out Finally, scylla's kernel configuration file is: # # GENERICAH -- Generic machine with WD/AHx family disks # # $Id: GENERICAH,v 1.36 1994/06/17 06:56:59 sean Exp $ # machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" ident GENERICAH timezone 8 dst maxusers 10 maxfdescs 2048 #Max file descriptors per process options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options ISOFS #ISO File System options NFS #Network File System options PCFS #MSDOS File System options "COMPAT_43" #Compatible with BSD 4.3 options "TCP_COMPAT_42" #TCP/IP compatible with 4.2 options XSERVER #Xserver options UCONSOLE #X Console support options "FAT_CURSOR" #block cursor in syscons or pccons options GATEWAY #Host is a Gateway (forwards packets) options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device options "NCONS=4" #4 virtual consoles options ALLOW_CONFLICT_IOADDR #For PS/2 mouse. config "386bsd" root on wd1 swap on wd1 dumps on wd1 controller isa0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 tape ft0 at fdc0 drive 2 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller scbus0 device cd0 #Only need one of these, the code dynamically grows device mcd0 at isa? port 0x340 bio irq 11 vector mcdintr device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr device psm0 at isa? port "IO_KBD" tty irq 12 vector psmintr device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device ed0 at isa? port 0x360 net irq 15 vector edintr options EXCLUDE_GUS options EXCLUDE_GUS_IODETECT options EXCLUDE_PAS options EXCLUDE_SB_EMULATION options EXCLUDE_PRO_MIDI options "ALLOW_CONFLICT_IRQ" device snd2 at isa? port 0x220 irq 5 drq 1 vector sbintr device snd6 at isa? port 0x220 irq 5 drq 5 vector sbintr device snd1 at isa? port 0x388 device snd7 at isa? port 0x330 pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 2 pseudo-device pty 16 pseudo-device speaker pseudo-device swappager pseudo-device vnodepager pseudo-device devpager
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9501212123.AA11216>