Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 10 Jul 2000 15:25:35 -0400 (EDT)
From:      Lint^^ <lint@satan.reject.org>
To:        freebsd-smp@freebsd.org
Subject:   Dell 620 SMP kernel causes reboot at "IOAPIC #0 intpin 2 -> irq 0"
Message-ID:  <Pine.BSO.4.21.0007101512470.10864-100000@satan.dyn.reject.org>

next in thread | raw e-mail | index | archive | help
hi... does anyone know of issues regarding 4.0-STABLE kernel and the
mysterious reboot it causes on this Dell 620 Workstation? (dual Xeon 733,
AIC-7899 SCSI card (if that's relevant)).

as in the subject, it gets to "IOAPIC #0 intpin 2 -> irq 0" and
_immediately_ causes a machine reboot, i.e. BIOS POST and all... i've not
seen anything regarding this on the mailing lists, so if anyone has any
pointers or insights, they would be greatly appreciated. a bit of
background information follows:


===============================================================================

MPTable, version 2.0.15

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:			BIOS
  physical address:		0x000fe710
  signature:			'_MP_'
  length:			16 bytes
  version:			1.4
  checksum:			0x91
  mode:				Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:		0x000f0000
  signature:			'PCMP'
  base table length:		652
  version:			1.4
  checksum:			0xb7
  OEM ID:			'DELL    '
  Product ID:			'WS 620      '
  OEM table pointer:		0x00000000
  OEM table size:		0
  entry count:			73
  local APIC address:		0xfee00000
  extended table length:	0
  extended table checksum:	0

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:	APIC ID	Version	State		Family	Model	Step	Flags
		 0	 0x11	 BSP, usable	 6	 8	 3	 0x383fbff
		 1	 0x11	 AP, usable	 6	 8	 3	 0x383fbff
--
Bus:		Bus ID	Type
		 0	 PCI   
		 1	 PCI   
		 2	 PCI   
		 3	 PCI   
		 4	 PCI   
		 5	 ISA   
--
I/O APICs:	APIC ID	Version	State		Address
		 2	 0x20	 usable		 0xfec00000
--
I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	active-hi        edge	     5	   0	      2	   0
		INT	 conforms    conforms	     5	   1	      2	   1
		INT	 conforms    conforms	     5	   0	      2	   2
		INT	 conforms    conforms	     5	   3	      2	   3
		INT	 conforms    conforms	     5	   4	      2	   4
		INT	 conforms    conforms	     5	   5	      2	   5
		INT	 conforms    conforms	     5	   6	      2	   6
		INT	 conforms    conforms	     5	   7	      2	   7
		INT	 conforms    conforms	     5	   8	      2	   8
		INT	 conforms    conforms	     5	   9	      2	   9
		INT	 conforms    conforms	     5	  10	      2	  10
		INT	 conforms    conforms	     5	  11	      2	  11
		INT	 conforms    conforms	     5	  12	      2	  12
		INT	 conforms    conforms	     5	  14	      2	  14
		INT	 conforms    conforms	     5	  15	      2	  15
		INT	 conforms    conforms	     1	 0:A	      2	  16
		INT	 conforms    conforms	     4	 4:A	      2	  16
		INT	 conforms    conforms	     4	 6:A	      2	  16
		INT	 conforms    conforms	     4	 8:A	      2	  16
		INT	 conforms    conforms	     4	 9:B	      2	  16
		INT	 conforms    conforms	     4	 3:B	      2	  16
		INT	 conforms    conforms	     4	10:C	      2	  16
		INT	 conforms    conforms	     4	11:D	      2	  16
		INT	 conforms    conforms	     4	 1:D	      2	  16
		INT	 conforms    conforms	     3	 6:A	      2	  16
		INT	 conforms    conforms	     3	 4:A	      2	  16
		INT	 conforms    conforms	     3	 7:B	      2	  16
		INT	 conforms    conforms	     0	31:B	      2	  17
		INT	 conforms    conforms	     1	 0:B	      2	  17
		INT	 conforms    conforms	     4	12:A	      2	  17
		INT	 conforms    conforms	     4	 5:A	      2	  17
		INT	 conforms    conforms	     4	 8:B	      2	  17
		INT	 conforms    conforms	     4	 9:C	      2	  17
		INT	 conforms    conforms	     4	 3:C	      2	  17
		INT	 conforms    conforms	     4	10:D	      2	  17
		INT	 conforms    conforms	     4	11:A	      2	  17
		INT	 conforms    conforms	     4	 1:A	      2	  17
		INT	 conforms    conforms	     3	 6:B	      2	  17
		INT	 conforms    conforms	     3	 4:B	      2	  17
		INT	 conforms    conforms	     3	 7:C	      2	  17
		INT	 conforms    conforms	     4	12:B	      2	  18
		INT	 conforms    conforms	     4	 5:B	      2	  18
		INT	 conforms    conforms	     4	 8:C	      2	  18
		INT	 conforms    conforms	     4	 9:D	      2	  18
		INT	 conforms    conforms	     4	 3:D	      2	  18
		INT	 conforms    conforms	     4	10:A	      2	  18
		INT	 conforms    conforms	     4	11:B	      2	  18
		INT	 conforms    conforms	     4	 1:B	      2	  18
		INT	 conforms    conforms	     3	 6:C	      2	  18
		INT	 conforms    conforms	     3	 4:C	      2	  18
		INT	 conforms    conforms	     3	 7:D	      2	  18
		INT	 conforms    conforms	     0	31:D	      2	  19
		INT	 conforms    conforms	     4	 7:A	      2	  19
		INT	 conforms    conforms	     4	 8:D	      2	  19
		INT	 conforms    conforms	     4	 9:A	      2	  19
		INT	 conforms    conforms	     4	 3:A	      2	  19
		INT	 conforms    conforms	     4	10:B	      2	  19
		INT	 conforms    conforms	     4	11:C	      2	  19
		INT	 conforms    conforms	     4	 1:C	      2	  19
		INT	 conforms    conforms	     3	 6:D	      2	  19
		INT	 conforms    conforms	     3	 4:D	      2	  19
		INT	 conforms    conforms	     3	 7:A	      2	  19
--
Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	PIN#
		ExtINT	active-hi        edge	     5	   0	    255	   0
		NMI	active-hi        edge	     5	   0	    255	   1

-------------------------------------------------------------------------------

# SMP kernel config file options:


# Required:
options		SMP			# Symmetric MultiProcessor Kernel
options		APIC_IO			# Symmetric (APIC) I/O

# Optional (built-in defaults will work in most cases):
#options		NCPU=2			# number of CPUs
#options		NBUS=6			# number of busses
#options		NAPIC=1			# number of IO APICs
#options		NINTR=62		# number of INTs

===============================================================================


Lint^^



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSO.4.21.0007101512470.10864-100000>