From owner-freebsd-isp Sun Apr 11 16:54:58 1999 Delivered-To: freebsd-isp@freebsd.org Received: from daedal.oneway.com (daedal.oneway.com [205.252.89.49]) by hub.freebsd.org (Postfix) with ESMTP id 80AF415B27 for ; Sun, 11 Apr 1999 16:53:38 -0700 (PDT) (envelope-from jay@oneway.com) Received: from localhost (jay@localhost) by daedal.oneway.com (8.9.1/8.9.1) with ESMTP id TAA26844; Sun, 11 Apr 1999 19:50:51 -0400 (EDT) (envelope-from jay@oneway.com) Date: Sun, 11 Apr 1999 19:50:50 -0400 (EDT) From: Jay Kuri To: rg@plusline.de Cc: Willem Jan Withagen , rowan@sensation.net.au, isp@FreeBSD.ORG Subject: Re: freebsd used in routers? In-Reply-To: <199904110955.LAA02260@schafftauchnix.plusline.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-isp@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org On Sun, 11 Apr 1999, Richard Gresek wrote: > I am playing with mrt after reading your mails and would like > to use it towards our upstreams. One is connected via fastethernet > so that won't be a problem. The other one is a E1. Is there some > hardware supported by FreeBSD to connect to E1 or T1? > Something like Cisco's highspeed serial with x.21? Are there > some experiances in production use? I've used Sangoma's high-speed serial cards. They have one card (the S508-FT1) which has an integrated CSU/DSU for T1/E1 circuits. We have several of them in production and have not had problems with them at all (We've been using them for ~6 months so far.) We've been very happy with them thus-far. Jay To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message