Date: Tue, 07 Jul 2009 09:46:58 -0600 From: "Justin T. Gibbs" <gibbs@scsiguy.com> To: Jay Hall <jhall@socket.net> Cc: freebsd-questions@freebsd.org Subject: Re: Adaptec 29320ALP-R and tape drive Message-ID: <4A536DF2.4070909@scsiguy.com> In-Reply-To: <22232360-A8C7-4D89-B38C-1CD911BA4591@socket.net> References: <22232360-A8C7-4D89-B38C-1CD911BA4591@socket.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Go into the card 29320's BIOS and configure your tape drive for non-packetized negotiation. If this works, we can try a few other things in the driver to see if it is possible to get things working in packetized mode. -- Justin Jay Hall wrote: > I just installed an Adaptec 29320ALP-R in my FreeBSD 7.2 server. > Connected to the card is an HP Ultrium 1/8 G2 tape drive. > > During the boot sequence, FreeBSD pauses to wait for the SCSI devices to > settle. Then, I receive the following message > > (probe79:ahd0:0:4:0: Probable outgoing LQ CRC error. Retrying command. > > I have moved the card to a different slot with the same results, > replaced the cable, etc. If I do not power on the tape drive, the > system will boot normally. > > Any suggestions would be greatly appreciated. > > Thanks, > > > Jay > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A536DF2.4070909>