From owner-freebsd-questions Sun Dec 2 21:51:53 2001 Delivered-To: freebsd-questions@freebsd.org Received: from mail.rpi.edu (mail.rpi.edu [128.113.22.40]) by hub.freebsd.org (Postfix) with ESMTP id 52A4237B419 for ; Sun, 2 Dec 2001 21:51:51 -0800 (PST) Received: from [128.113.24.47] (gilead.acs.rpi.edu [128.113.24.47]) by mail.rpi.edu (8.11.3/8.11.3) with ESMTP id fB35pkU33390; Mon, 3 Dec 2001 00:51:46 -0500 Mime-Version: 1.0 X-Sender: drosih@mail.rpi.edu Message-Id: In-Reply-To: <20011119130147.I2067-100000@zeus> References: <20011119130147.I2067-100000@zeus> Date: Mon, 3 Dec 2001 00:51:44 -0500 To: Mike Knichel , From: Garance A Drosihn Subject: Re: printing to network printer Content-Type: text/plain; charset="us-ascii" ; format="flowed" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG At 1:03 PM -0500 11/19/01, Mike Knichel wrote: >I have an epson DFX 5000+ printer with a newtork card that is hooked >directly to the network. I can finally print to it with one hitch. I >need it to print a form feed after each job. How do I accomplish this? >I have tried the mannual and the online help and nothing seems to do >the trick. I have not had to do this myself, but I think there are some printcap options which should give you a formfeed before each job. Is that good enough? (before instead of after) check 'man printcap', and there's the options for setting the formfeed string, and the 'fo' option to set whether a formfeed is sent at all. If those don't work, then you would have to set up a filter, probably an 'if=' filter, which would just read whatever it was sent and then tack on a formfeed at the end of it. -- Garance Alistair Drosehn = gad@eclipse.acs.rpi.edu Senior Systems Programmer or gad@freebsd.org Rensselaer Polytechnic Institute or drosih@rpi.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message