Date: Sat, 27 Jul 2002 15:44:39 +0200 From: "Dave Raven" <dave@raven.za.net> To: =?iso-8859-1?Q?David_Sieb=F6rger?= <drs@rucus.ru.ac.za> Cc: <freebsd-questions@freebsd.org> Subject: Re: ISDN Message-ID: <017101c23573$c1b0dd20$0200a8c0@lucy> References: <013301c23566$a85256e0$0200a8c0@lucy> <20020727130658.GB5587@rucus.ru.ac.za>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks so much for the help, I'm not sure but I think its looking better: iwic0: <Generic Winbond W6692 ISDN PCI (0x66921050)> port 0xc400-0xc4ff mem 0xd51100 00-0xd5110fff irq 12 at device 5.0 on pci1 iwic0: passive stack unit 0 However I still get an error I dont quite know howto solve: isic0: Could not get an irq for USR Sportster TA! Any ideas? Thanks again, Dave. ----- Original Message ----- From: "David Siebörger" <drs@rucus.ru.ac.za> To: "Dave Raven" <dave@raven.za.net> Cc: <freebsd-questions@freebsd.org> Sent: Saturday, July 27, 2002 3:06 PM Subject: Re: ISDN > On Sat 2002-07-27 (14:10), Dave Raven wrote: > > I've just bought an ISDN card (USRobotics Internal 128 TA). > > It is supported by BSD and I have these options in my kernel: > > > > options USR_STI > > device isic0 at isa? port 0x268 irq 12 flags 7 > > You've installed a driver for an ISA card, but... > > > However, when I boot I see this: > > . > > pci1: <unknown card> (vendor=0x1050, dev=0x6692) at 5.0 irq 12 > > ... yours is a PCI card. From the vendor and device IDs, it looks > like iwic(4) is the correct driver for your card. > > > -- > David Siebörger > drs@rucus.ru.ac.za > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?017101c23573$c1b0dd20$0200a8c0>