Date: Sat, 26 Sep 2009 15:37:10 GMT From: Lee Packham <lpackham@leenux.org.uk> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/139156: MCP55 SATA Disks fail to initialise, leading to failure to boot Message-ID: <200909261537.n8QFbAqT077855@www.freebsd.org> Resent-Message-ID: <200909261540.n8QFe1PK094721@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 139156
>Category: amd64
>Synopsis: MCP55 SATA Disks fail to initialise, leading to failure to boot
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: freebsd-amd64
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sat Sep 26 15:40:01 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Lee Packham
>Release: 8.0 RC1
>Organization:
None
>Environment:
FreeBSD smegpro.localdomain 7.2-RELEASE-p2 FreeBSD 7.2-RELEASE-p2 #0: Wed Jun 24 00:14:35 UTC 2009 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>Description:
re: the environment - I can't get the 8.0 one as I can't make it boot!
I have attached the dmesg from 7.2-RELEASE-p2 to this bug report. In short I cannot boot 8.0 RC1 as I get constant DMA TIMEOUT errors from initialising a hard disk. The same machine works absolutely find on 7.2-RELEASE-p2 so it's not hardware. I can plug any disk in and get the same problem.
I have marked this critical/high as if I were to freebsd-update to 8.0 right now, I would have a non-working server - combined with the imminent release of 8.0, it is therefore quite serious.
>How-To-Repeat:
Connect disk to controller, boot.
>Fix:
None that I know of.
Patch attached with submission follows:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p2 #0: Wed Jun 24 00:14:35 UTC 2009
root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual-Core AMD Opteron(tm) Processor 1214 (2200.01-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f33 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
usable memory = 4281417728 (4083 MB)
avail memory = 4110589952 (3920 MB)
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfcfbf000-0xfcfbffff irq 22 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcfbec00-0xfcfbecff irq 23 at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 SATA300 controller> port 0xed80-0xed87,0xed00-0xed03,0xec00-0xec07,0xeb80-0xeb83,0xeb00-0xeb0f mem 0xfcfbd000-0xfcfbdfff irq 21 at device 5.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xea80-0xea87,0xea00-0xea03,0xe980-0xe987,0xe900-0xe903,0xe880-0xe88f mem 0xfcfbc000-0xfcfbcfff irq 22 at device 5.1 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xe800-0xe807,0xe780-0xe783,0xe700-0xe707,0xe680-0xe683,0xe600-0xe60f mem 0xfcfbb000-0xfcfbbfff irq 23 at device 5.2 on pci0
atapci2: [ITHREAD]
ata6: <ATA channel 0> on atapci2
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci2
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 11.0 on pci0
pci3: <PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci16: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> mem 0xfb000000-0xfbffffff,0xfdefc000-0xfdefffff,0xfd000000-0xfd7fffff irq 16 at device 0.0 on pci16
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci17: <ACPI PCI bus> on pcib6
bge0: <HP NC105i PCIe Gigabit Server Adapter, ASIC rev. 0xa200> mem 0xfdff0000-0xfdffffff irq 17 at device 0.0 on pci17
miibus0: <MII bus> on bge0
brgphy0: <BCM5722 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:1f:29:e7:40:e2
bge0: [ITHREAD]
pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci18: <ACPI PCI bus> on pcib7
acpi_button0: <Power Button> on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on uhub0
kbd2 at ukbd0
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 2> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <HL-DT-ST DVD-RAM GH15L/FA01> at ata2-master SATA150
ad6: 715404MB <SAMSUNG HD753LJ 1AA01109> at ata3-master SATA300
ad8: 953869MB <Seagate ST31000333AS LC15> at ata4-master SATA300
ad10: 715404MB <SAMSUNG HD753LJ 1AA01109> at ata5-master SATA300
ad12: 152627MB <GB0160CAABV HPG1> at ata6-master SATA150
GEOM_LABEL: Label for provider ad8s1 is ufsid/49fefbe0b2b469d6.
SMP: AP CPU #1 Launched!
GEOM_MIRROR: Device mirror/gm6 launched (2/2).
GEOM_LABEL: Label for provider mirror/gm6s1 is ufsid/49839adec8f111d3.
GEOM_LABEL: Label for provider ad12s1a is ufsid/4983926e40323fc9.
GEOM_LABEL: Label for provider ad12s1d is ufsid/49839279a4a891da.
GEOM_LABEL: Label for provider ad12s1e is ufsid/4983926edd9d878a.
GEOM_LABEL: Label for provider ad12s1f is ufsid/4983926e451f3b4c.
Trying to mount root from ufs:/dev/ad12s1a
GEOM_LABEL: Label ufsid/4983926e40323fc9 removed.
GEOM_LABEL: Label for provider ad12s1a is ufsid/4983926e40323fc9.
GEOM_LABEL: Label ufsid/49839adec8f111d3 removed.
GEOM_LABEL: Label ufs
d/
4983926edd9d878a removed.
GEOM_LABEL: Label for provider mirror/gm6s1 is ufsid/49839adec8f111d3.
GEOM_LABEL: Label for provider ad12s1e is ufsid/4983926edd9d878a.
GEOM_LABEL: Label ufsid/49fefbe0b2b469d6 removed.
GEOM_LABEL: Label for provider ad8s1 is ufsid/49fefbe0b2b469d6.
GEOM_LABEL: Label ufsid/4983926e451f3b4c removed.
GEOM_LABEL: Label for provider ad12s1f is ufsid/4983926e451f3b4c.
GEOM_LABEL: Label ufsid/49839279a4a891da removed.
GEOM_LABEL: Label for provider ad12s1d is ufsid/49839279a4a891da.
GEOM_LABEL: Label ufsid/4983926e40323fc9 removed.
GEOM_LABEL: Label ufsid/4983926edd9d878a removed.
GEOM_LABEL: Label ufsid/4983926e451f3b4c removed.
GEOM_LABEL: Label ufsid/49839279a4a891da removed.
GEOM_LABEL: Label ufsid/49839adec8f111d3 removed.
GEOM_LABEL: Label ufsid/49fefbe0b2b469d6 removed.
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 6
ZFS storage pool version 6
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
[lpackham@smegpro ~]$ uname -a
FreeBSD smegpro.localdomain 7.2-RELEASE-p2 FreeBSD 7.2-RELEASE-p2 #0: Wed Jun 24 00:14:35 UTC 2009 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
[lpackham@smegpro ~]$
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200909261537.n8QFbAqT077855>