From owner-freebsd-usb@FreeBSD.ORG Mon Apr 11 19:54:32 2005 Return-Path: Delivered-To: freebsd-usb@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6473A16A4CF for ; Mon, 11 Apr 2005 19:54:32 +0000 (GMT) Received: from rwcrmhc11.comcast.net (rwcrmhc11.comcast.net [204.127.198.35]) by mx1.FreeBSD.org (Postfix) with ESMTP id 737A443D31 for ; Mon, 11 Apr 2005 19:54:31 +0000 (GMT) (envelope-from e.schuele@computer.org) Received: from [208.206.151.59] (host59.gtisd.com[208.206.151.59]) by comcast.net (rwcrmhc11) with ESMTP id <2005041119542401300k2h04e>; Mon, 11 Apr 2005 19:54:24 +0000 Message-ID: <425AD618.9010608@computer.org> Date: Mon, 11 Apr 2005 14:55:04 -0500 From: Eric Schuele User-Agent: Mozilla Thunderbird 1.0.2 (X11/20050325) X-Accept-Language: en-us, en MIME-Version: 1.0 To: freeBSD-USB@freebsd.org Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Trouble with TEAC usb floppy (FD-05PUB)... X-BeenThere: freebsd-usb@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: FreeBSD support for USB List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 11 Apr 2005 19:54:32 -0000 Hello, I am having difficulty with my TEAC usb floppy drive (FD-05PUB). I'm not really sure what's wrong. Plugging it in.. it appears to get detected. But it is unusable. I always get a 'device busy' after mounting it. Attached is a dmesg obtained after booting with the drive plugged in. Also of note... the "* was not properly dismounted" is due to the fact that FreeBSD gave up on the buffers when shutting down... because of the floppy. If I'm luck it gives up. Sometimes I get a kernel trap. This has been an ongoing problem since 5.2 (Presently running 5.4-STABLE as of a few days ago). Is anyone else seeing this problem? Should I file a PR? Its been going on for quite sometime. Any help is appreciated. If anymore information is needed please let me know. -- Regards, Eric FreeBSD fangorn.nxdomain.org 5.4-STABLE FreeBSD 5.4-STABLE #10: Wed Apr 6 00:21:02 CDT 2005 root@fangorn.nxdomain.org:/usr/obj/usr/src/sys/CUSTOM i386 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-STABLE #10: Wed Apr 6 00:21:02 CDT 2005 root@fangorn.nxdomain.org:/usr/obj/usr/src/sys/CUSTOM Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2657.83-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebf9ff real memory = 536645632 (511 MB) avail memory = 515473408 (491 MB) npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI link \\_SB_.PCI0.LNKB has invalid initial irq 11, ignoring pci0: on pcib0 agp0: mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 drm0: port 0xc000-0xc0ff mem 0xfcff0000-0xfcffffff,0xe8000000-0xefffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 128MB info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 uhci0: port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 29.7 (no driver attached) pcib2: at device 30.0 on pci0 pci2: on pcib2 bfe0: mem 0xfaffe000-0xfaffffff irq 5 at device 1.0 on pci2 miibus0: on bfe0 bmtphy0: on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: Ethernet address: 00:0d:56:b4:f1:50 ath0: mem 0xfafe0000-0xfafeffff irq 11 at device 2.0 on pci2 ath0: mac 5.9 phy 4.3 5ghz radio 3.6 ath0: Ethernet address: 00:0e:9b:53:31:9d ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps cbb0: at device 4.0 on pci2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <1394 Open Host Controller Interface> mem 0xfaff8000-0xfaffbfff,0xfaffd800-0xfaffdfff irq 11 at device 4.1 on pci2 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 39:4f:c0:00:03:57:18:81 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 3a:4f:c0:57:18:81 fwe0: Ethernet address: 3a:4f:c0:57:18:81 fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pcm0: port 0xbc40-0xbc7f,0xb800-0xb8ff mem 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 5 at device 31.5 on pci0 pcm0: pci0: at device 31.6 (no driver attached) acpi_tz0: on acpi0 atkbdc0: port 0x66,0x62,0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 psm0: flags 0x1000 irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 orm0: at iomem 0xcf800-0xcffff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 umass0: TEAC TEAC FD-05PUB, rev 2.00/0.00, addr 2 Timecounter "TSC" frequency 2657825740 Hz quality 800 Timecounters tick every 10.000 msec acd0: CDRW at ata0-master PIO4 ad2: 38154MB [77520/16/63] at ata1-master UDMA100 da0 at umass-sim0 bus 0 target 0 lun 0 da0: Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 Mounting root from ufs:/dev/ad2s1a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /usr/home was not properly dismounted WARNING: /var was not properly dismounted (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) fsync: giving up on dirty: 0xc23e7210: tag devfs, type VCHR, usecount 2, writecount 0, refcount 3, lock type devfs: EXCL (count 1) by thread 0xc2196480 (pid 708) dev da0