Date: Thu, 02 May 2002 18:25:20 +1000 From: Kal Torak <kaltorak@quake.com.au> To: FreeBSD Stable <freebsd-stable@freebsd.org> Cc: FreeBSD Mobile <freebsd-mobile@freebsd.org> Subject: Re: pc-card ethernet problems since upgrade from 4.2 Message-ID: <3CD0F7F0.9000802@quake.com.au> References: <3CD08EE6.8030605@quake.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------060605010007070705010803
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Kal Torak wrote:
> Hi,
>
> I have an IBM Thinkpad I series (model 2611) and a D-Link
> ethernet pc-card (DFE-650) which was working ok under 4.2
> but had to use fa_select to stop it from timing out...
>
> Now I upgraded to 4.4 and it just keeps timing out anyway,
> even using fa_select doesnt help... Before ifconfig couldnt
> seem to initialise the card so I would just set the ip and
> then use fa_select to bring it up.. Now ifconfig seems to
> be able to initialise the card its self, but not properly
> since I constantly get "ed1: timed out" messages..
>
> Is there some flags I can pass to ifconfig to make it do
> what it did in 4.2 that might make it work again? Or maybe
> some that will initialise it properly??
>
> Any ideas would be great! Thanks!
Just thought I would attatch a dmesg from a verbose boot incase
that helps shed some light on whats going wrong...
--------------060605010007070705010803
Content-Type: text/plain;
name="dmesg.out"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.out"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Calibrating clock(s) ... TSC clock: 299930231 Hz, i8254 clock: 1193138 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium/P55C (quarter-micron) (299.94-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x582 Stepping = 2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 100597760 (98240K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004a6000 - 0x05fe7fff, 95690752 bytes (23362 pages)
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 93257728 (91072K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0280
bios32: Entry = 0xf0210 (c00f0210) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x0
pnpbios: Found PnP BIOS data at 0xc00f5520
pnpbios: Entry = fa000:0 Rev = 1.0
pnpbios: Event flag at 4b0
Other BIOS signatures found:
ACPI: 000fe030
Preloaded elf kernel "kernel" at 0xc0480000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04800a8.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=153110b9)
pcibios: No call entry point
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 129684865 bytes/sec
bzero() bandwidth = 758725341 bytes/sec
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x10b9, dev=0x1531, revid=0xb3
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x10b9, dev=0x1533, revid=0x0a
class=06-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1217, dev=0x6832, revid=0x34
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 44000000, size 12
found-> vendor=0x1217, dev=0x6832, revid=0x34
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[10]: type 1, range 32, base 44001000, size 12
found-> vendor=0x10c8, dev=0x0004, revid=0x01
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 07000000, size 24
map[14]: type 1, range 32, base 08000000, size 21
map[18]: type 1, range 32, base 08200000, size 20
found-> vendor=0x10b9, dev=0x5229, revid=0x20
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=15
map[20]: type 1, range 32, base 00006090, size 4
found-> vendor=0x10b9, dev=0x7101, revid=0x09
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 0000f100, size 6
map[14]: type 1, range 32, base 0000f140, size 5
found-> vendor=0x10b9, dev=0x5237, revid=0x03
class=0c-03-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 08300000, size 12
pci0: <PCI bus> on pcib0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pcic0: <O2micro 6832/6833 PCI-Cardbus Bridge> mem 0x44000000-0x44000fff irq 9 at device 5.0 on pci0
pcic0: Warning: O2micro OZ68xx chips may not work
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <O2micro 6832/6833 PCI-Cardbus Bridge> mem 0x44001000-0x44001fff irq 9 at device 5.1 on pci0
pcic1: Warning: O2micro OZ68xx chips may not work
using shared irq9.
pccard1: <PC Card bus (classic)> on pcic1
pci0: <NeoMagic MagicGraph 128XD SVGA controller> (vendor=0x10c8, dev=0x0004) at 6.0 irq 9
atapci0: <AcerLabs Aladdin ATA33 controller> port 0x6090-0x609f irq 15 at device 11.0 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x6090
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x6098
ata1: mask=03 status0=50 status1=01
ata1: mask=03 ostat0=50 ostat2=01
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=00 status1=01
ata1-slave: ATA probe a=04 b=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
chip1: <AcerLabs M15x3 Power Management Unit> port 0xf140-0xf15f,0xf100-0xf13f at device 12.0 on pci0
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x8300000-0x8300fff irq 10 at device 15.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
YMH0021: start dependant
YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x10
YMH0021: adding io range 0x530-0x537, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x8
YMH0021: adding io range 0x330-0x331, size=0x2, align=0x2
YMH0021: adding io range 0x370-0x371, size=0x2, align=0x2
YMH0021: adding irq mask 0x20
YMH0021: adding dma mask 0x1
YMH0021: adding dma mask 0x80
YMH0021: start dependant
YMH0021: adding io range 0x240-0x24f, size=0x10, align=0x10
YMH0021: adding io range 0xe80-0xe87, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x8
YMH0021: adding io range 0x300-0x301, size=0x2, align=0x2
YMH0021: adding io range 0x100-0xfff, size=0x2, align=0x2
YMH0021: adding irq mask 0xea0
YMH0021: adding dma mask 0x3
YMH0021: adding dma mask 0x80
YMH0021: start dependant
YMH0021: adding io range 0x220-0x28f, size=0x10, align=0x10
YMH0021: adding io range 0x530-0xf4f, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x3ff, size=0x8, align=0x8
YMH0021: adding io range 0x300-0x335, size=0x2, align=0x2
YMH0021: adding io range 0x100-0xfff, size=0x2, align=0x2
YMH0021: adding irq mask 0xea8
YMH0021: adding dma mask 0x83
YMH0021: adding dma mask 0x83
YMH0021: end dependant
PnP device failed to report resource data
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0: not probed (disabled)
bt0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic2 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic3: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is 0x230. Failing probe.
unknown: <YAMAHA OPL3-SAx Audio System> failed to probe at port 0x220-0x22f,0x530-0x537,0x388-0x38f,0x330-0x331,0x370-0x371 irq 5 drq 0,7 on isa0
BIOS Geometries:
0:020cfe3f 0..524=525 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c440, tty 631292, net 671292
bpf: sl0 attached
bpf: faith0 attached
ata0-master: success setting UDMA2 on Acer chip
Creating DISK ad0
ad0: <IBM-DKLA-24320/KL4OA4AA> ATA-4 disk at ata0-master
ad0: 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad0: 4126MB <IBM-DKLA-24320> [8944/15/63] at ata0-master UDMA33
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <SANYO CRD-S372BVA/1.24AVD> CDROM drive at ata1 as master
acd0: read 1377KB/s (32015KB/s), 256KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 1
pcic1: reset 1 int is 90 stat is 5f
ad0s1: type 0xa5, start 63, end = 8450189, size 8450127 : OK
start_init: trying /sbin/init
pcic1: reset 2 int is f0 stat is 7f
pcic1: reset 3 int is f0 stat is 7f
splash: image decoder found: fire_saver
Linux-ELF exec handler installed
ed-: ed0 exists, using next available unit number
pccard1: Assigning ed1: io 0x240-0x25f irq 9 mem 0x0-0xffffffff
pcic: I/O win 0 flags 15 240-25f
ed1: Forcing IRQ to 9
pcic: I/O win 0 flags 5 240-25f
ed1 at port 0x240-0x25f irq 9 slot 1 on pccard1
pcic: I/O win 0 flags 15 240-25f
ed1: Forcing IRQ to 9
bpf: ed1 attached
ed1: address 00:50:ba:74:11:49, type Linksys (16 bit)
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x0010dd, model 0x0001, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed1: device timeout
ed1: device timeout
--------------060605010007070705010803--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CD0F7F0.9000802>