Date: Fri, 26 Jul 2002 15:05:29 -0400 From: Hudson Lee <hudlee@vineyard.net> To: freebsd-mobile@freebsd.org Subject: Opps wrong dmesg sorry Message-ID: <20020726190529.GB48127@harlem.foo.bar>
next in thread | raw e-mail | index | archive | help
Sorry for the clutter In my previous message I attached the dmesg from a different machine here is the one for my laptop: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-STABLE #8: Fri Jul 26 13:09:52 EDT 2002 hudlee@tophat:/usr/obj/usr/src/sys/TOPHAT Timecounter "i8254" frequency 1193182 Hz CPU: Pentium 4 (1794.19-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH ,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC> real memory = 267780096 (261504K bytes) avail memory = 256598016 (250584K bytes) Preloaded elf kernel "kernel" at 0xc039a000. Preloaded elf module "if_wi.ko" at 0xc039a09c. Preloaded elf module "agp.ko" at 0xc039a13c. md0: Malloc disk Using $PIR table, 14 entries at 0xc00fdeb0 apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82845 Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 4c57 graphics accelerator> at 0.0 irq 11 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 11 at device 29.2 on pci0 uhci2: (New UHCI DeviceId=0x24878086) usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 pcic0: <YENTA PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2 pccard0: <PC Card bus (classic)> on pcic0 pcic1: <YENTA PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on pci2 pccard1: <PC Card bus (classic)> on pcic1 pci2: <unknown card> (vendor=0x14b9, dev=0xa504) at 2.0 irq 11 fxp0: <Intel Pro/100 Ethernet> port 0x8400-0x843f mem 0xd0204000-0xd0204fff irq 11 at device 8.0 on pci2 fxp0: Ethernet address 00:09:6b:10:1d:b5 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0 x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 11 at device 31.3 on pci 0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus general purpose I/O> on smbus0 pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at device 31.5 on pci0 pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11 eisa0: <EISA bus> on motherboard eisa0: unknown card @H@0000 (0x01000000) at slot 1 orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe 0000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: cannot reserve I/O port range ata1-slave: ATAPI identify retries exceeded ad0: 38154MB <HITACHI_DK23DA-40B> [77520/16/63] at ata0-master UDMA100 acd0: DVD-ROM <HL-DT-STDVD-ROM GDR8081N> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a drm0: <ATI Radeon LW Mobility 7 (AGP)> port 0x3000-0x30ff mem 0xd0100000-0xd010ffff,0xe8000000-0 xefffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 64MB info: [drm] Initialized radeon 1.1.1 20010405 on minor 0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020726190529.GB48127>