Date: Sun, 29 May 2005 03:31:53 +0200 From: Ulf Magnusson <ulfma629@student.liu.se> To: Vizion <vizion@vizion.occoxmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: Seagate HD not detected by FreeBSD Message-ID: <b1fdfb4987.b4987b1fdf@liu.se>
next in thread | raw e-mail | index | archive | help
----- Original Message ----- From: Vizion <vizion@vizion.occoxmail.com> Date: Sunday, May 29, 2005 3:11 am Subject: Re: Seagate HD not detected by FreeBSD > On Saturday 28 May 2005 18:08, the author Ulf Magnusson > contributed to the > dialogue on Re: Seagate HD not detected by FreeBSD: > >From: Vizion <vizion@vizion.occoxmail.com> > > > >> On Saturday 28 May 2005 16:48, the author Ulf Magnusson > >> contributed to the > >> > >> dialogue on Seagate HD not detected by FreeBSD: > >> >I'm trying to add a 120 GiB Seagate Barracuda (ST3120022A) HD. > I've>> >attached it as the sole device on IDE cable 2, jumpering it > as a > >> > >> slave>device. It is correctly detected by the BIOS as the Secondary > >> Slave.> > >> > >> >The drive isn't detected by FreeBSD. There's no entry for it among > >> > >> the>dmesg messages, and no device node gets created. I've tried > >> disabling>UDMA on the drive, to no avail. > >> > >> >System info: > >> > > >> >Epox Nforce2 motherboard > >> >FreeBSD obygden 5.4-RELEASE FreeBSD 5.4-RELEASE #0: Wed May 11 > >> > >> 17:32:06>CEST 2005 ulf@obygden:/usr/obj/usr/src/sys/DEB i386 > >> > >> >Parts of dmesg output: > >> > > >> >atapci0: <nVidia nForce2 UDMA133 controller> port > >> >0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on > >> > >> pci0>ata0: channel #0 on atapci0 > >> > >> >ata1: channel #1 on atapci0 > >> >... > >> >ad0: 38166MB <ST340014A/8.01> [77545/16/63] at ata0-master UDMA100 > >> >Mounting root from ufs:/dev/ad0s1a > >> ><End of dmesg output> > >> > >> Can you please attach the full output from dmesg > >> > >> daid > > > >Copyright (c) 1992-2005 The FreeBSD Project. > >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, > 1993, 1994 > > The Regents of the University of California. All rights > reserved.>FreeBSD 5.4-RELEASE #0: Wed May 11 17:32:06 CEST 2005 > > ulf@obygden:/usr/obj/usr/src/sys/DEB > >Timecounter "i8254" frequency 1193182 Hz quality 0 > >CPU: AMD Athlon(tm) processor (1403.19-MHz 686-class CPU) > > Origin = "AuthenticAMD" Id = 0x644 Stepping = 4 > > > >Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > >CM OV,PAT,PSE36,MMX,FXSR> > > AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!> > >real memory = 536805376 (511 MB) > >avail memory = 511438848 (487 MB) > >mptable_probe: MP Config Table has bad signature: > >ACPI APIC Table: <Nvidia AWRDACPI> > >ioapic0 <Version 1.1> irqs 0-23 on motherboard > >npx0: <math processor> on motherboard > >npx0: INT 16 interface > >acpi0: <Nvidia AWRDACPI> on motherboard > >acpi0: Power Button (fixed) > >Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > >acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on > acpi0>cpu0: <ACPI CPU> on acpi0 > >acpi_button0: <Power Button> on acpi0 > >pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > >pci0: <ACPI PCI bus> on pcib0 > >agp0: <NVIDIA nForce2 AGP Controller> mem 0xe0000000-0xe1ffffff at > >device 0.0 on > > pci0 > >pci0: <memory, RAM> at device 0.1 (no driver attached) > >pci0: <memory, RAM> at device 0.2 (no driver attached) > >pci0: <memory, RAM> at device 0.3 (no driver attached) > >pci0: <memory, RAM> at device 0.4 (no driver attached) > >pci0: <memory, RAM> at device 0.5 (no driver attached) > >isab0: <PCI-ISA bridge> at device 1.0 on pci0 > >isa0: <ISA bus> on isab0 > >pci0: <serial bus, SMBus> at device 1.1 (no driver attached) > >ohci0: <OHCI (generic) USB controller> mem 0xe4001000-0xe4001fff > irq 22 > >at devic > >e 2.0 on pci0 > >usb0: OHCI version 1.0, legacy support > >usb0: <OHCI (generic) USB controller> on ohci0 > >usb0: USB revision 1.0 > >uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > >uhub0: 3 ports with 3 removable, self powered > >ohci1: <OHCI (generic) USB controller> mem 0xe4004000-0xe4004fff > irq 21 > >at devic > >e 2.1 on pci0 > >usb1: OHCI version 1.0, legacy support > >usb1: <OHCI (generic) USB controller> on ohci1 > >usb1: USB revision 1.0 > >uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > >uhub1: 3 ports with 3 removable, self powered > >pci0: <serial bus, USB> at device 2.2 (no driver attached) > >pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0 > >pci1: <ACPI PCI bus> on pcib1 > >xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem > >0xe3000000-0xe300 > >007f irq 16 at device 8.0 on pci1 > >miibus0: <MII bus> on xl0 > >xlphy0: <3c905C 10/100 internal PHY> on miibus0 > >xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > >xl0: Ethernet address: 00:04:76:1c:4b:d1 > >pcm0: <Creative EMU10K1> port 0xd400-0xd41f irq 18 at device 10.0 > on pci1 > >pcm0: <SigmaTel STAC9708/11 AC97 Codec> > >atapci0: <nVidia nForce2 UDMA133 controller> port > >0xf000-0xf00f,0x376,0x170-0x17 > >7,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0 > >ata0: channel #0 on atapci0 > >ata1: channel #1 on atapci0 > >pci0: <serial bus, FireWire> at device 13.0 (no driver attached) > >pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > >pci2: <ACPI PCI bus> on pcib2 > >nvidia0: <GeForce3> mem > >0xdc000000-0xdc07ffff,0xd8000000-0xdbffffff,0xd0000000-0 > >xd0ffffff irq 19 at device 0.0 on pci2 > >acpi_tz0: <Thermal Zone> on acpi0 > >fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 > on acpi0 > >fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > >sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags > 0x10 on > >acpi0 > >sio0: type 16550A > >sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > >sio1: type 16550A > >ppc0: <Standard parallel printer port> port 0x778-0x77b,0x378- > 0x37f irq > >7 on acp > >i0 > >ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > >ppbus0: <Parallel port bus> on ppc0 > >lpt0: <Printer> on ppbus0 > >lpt0: Interrupt-driven port > >atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > >atkbd0: <AT Keyboard> irq 1 on atkbdc0 > >kbd0 at atkbd0 > >pmtimer0 on isa0 > >orm0: <ISA Option ROMs> at iomem 0xcc000-0xcc7ff,0xc0000-0xcb7ff > on isa0 > >sc0: <System console> at flags 0x100 on isa0 > >sc0: VGA <16 virtual consoles, flags=0x300> > >vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff > on isa0 > >ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.20, addr 2, > iclass 3/1 > >ums0: 4 buttons and Z dir. > >Timecounter "TSC" frequency 1403190916 Hz quality 800 > >Timecounters tick every 10.000 msec > >ad0: 38166MB <ST340014A/8.01> [77545/16/63] at ata0-master UDMA100 > >Mounting root from ufs:/dev/ad0s1a > > OK your drive is recognized as at1 > Here is the page from the handbook on www.freebsd.org - if you > follow the > instructions you should be OK: > -------------------------------------------------------------------- > ------------------- > 16.3 Adding Disks > Originally contributed by David O'Brien. > > Lets say we want to add a new SCSI disk to a machine that currently > ....... Excuse me if I'm being slow, but exactly where did you glean that information? I don't have any at1 node in /dev, at1 isn't mentioned anywhere in the boot messages, and Fdisk still acts like it only knows of one drive. Ulf
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b1fdfb4987.b4987b1fdf>