From owner-freebsd-questions  Sun Aug  6 16:16:30 1995
Return-Path: questions-owner
Received: (from majordom@localhost)
          by freefall.cdrom.com (8.6.11/8.6.6) id QAA16392
          for questions-outgoing; Sun, 6 Aug 1995 16:16:30 -0700
Received: from central.picker.com (central.picker.com [144.54.31.2])
          by freefall.cdrom.com (8.6.11/8.6.6) with SMTP id QAA16383
          for <questions@freebsd.org>; Sun, 6 Aug 1995 16:16:28 -0700
Received: from ct.picker.com by central.picker.com with smtp
	(Smail3.1.28.1 #3) id m0sfEsL-0004rlC; Sun, 6 Aug 95 19:12 EDT
Received: from elmer.ct.picker.com ([144.54.52.5]) by ct.picker.com (4.1/SMI-4.1)
	id AA10835; Sun, 6 Aug 95 19:12:31 EDT
Received: by elmer.ct.picker.com (5.0/SMI-SVR4)
	id AA22853; Sun, 6 Aug 1995 19:08:02 +0500
From: rhh@elmer (Randall Hopper)
Message-Id: <9508062308.AA22853@elmer.ct.picker.com>
Subject: (?) RJ45 Crossover Cable Question (Pin numbering)
To: questions@freefall.cdrom.com
Date: Sun, 6 Aug 1995 19:04:16 -0400 (EDT)
Reply-To: rhh@ct.picker.com
Organization:  Picker International, CT Division
X-Mailer: ELM [version 2.4 PL23]
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Length: 1275      
Sender: questions-owner@FreeBSD.org
Precedence: bulk

     In short, does someone know the convention for numbering the pins on an
RJ45 cable connector?  If the cable w/ attached connector is held in front of
you, pins on the near side of the connector and pointing up (cable attached to
the bottom), are the pins 1-to-8 numbered ascendingly from left-to-right or
right-to-left?

------------------------------------------------------------------------------

The more detailed version:

     I recently purchased an ethernet board for my FreeBSD box and am having
trouble getting it to talk to my router.  I suspect that the cable might be
the problem.

     The cable (custom made by someone else) is supposed to be an RJ45
crossover cable which I'll use to direct-connect to my home router.  I've
buzzed it out to verify that pins 1-3 and 2-6 are swapped.  If the answer to
the numbering convention question above is right-to-left, they are.  However,
given that it isn't working and my board appears to be working fine except that
it can't put a packet on the network, I suspect that the the convention is
in-fact left-to-right, and the person that built the cable cabled it backwards.
If someone knows which is correct, please drop me some e-mail.

     Thanks in advance.

							Randall Hopper
							rhh@ct.picker.com