From owner-freebsd-scsi Thu Apr 10 15:29:29 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id PAA04506 for freebsd-scsi-outgoing; Thu, 10 Apr 1997 15:29:29 -0700 (PDT) Received: from pluto.plutotech.com (root@pluto100.plutotech.com [206.168.67.137]) by freefall.freebsd.org (8.8.5/8.8.5) with ESMTP id PAA04496 for ; Thu, 10 Apr 1997 15:29:26 -0700 (PDT) Received: from narnia.plutotech.com (narnia.plutotech.com [206.168.67.130]) by pluto.plutotech.com (8.8.5/8.8.3) with ESMTP id QAA12423; Thu, 10 Apr 1997 16:29:15 -0600 (MDT) Message-Id: <199704102229.QAA12423@pluto.plutotech.com> X-Mailer: exmh version 2.0beta 12/23/96 To: bsdscsi@aeon.net (mika ruohotie) cc: scsi@FreeBSD.ORG Subject: Re: scsi error In-reply-to: Your message of "Thu, 10 Apr 1997 17:23:23 +0300." <199704101423.RAA18325@shadows.aeon.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Thu, 10 Apr 1997 16:27:43 -0600 From: "Justin T. Gibbs" Sender: owner-freebsd-scsi@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk >i use adaptec 2940UW, fujitsu 2gig ultra drives. (same server i had 3940UW >but had to take it out coz of errors worse than that) You mentioned before of problems with the 3940. They seem to work fine. The only difference I know of between the 3940 and the 2940 is that on systems that don't properly setup the bridge chip, you must use PIO (i.e. don't put AHC_ALLOW_MEMIO in your kernel config file). This "caveat" is documented in the ahc.4 man page. >mickey -- Justin T. Gibbs =========================================== FreeBSD: Turning PCs into workstations ===========================================