Date: Fri, 15 Jul 2005 16:37:16 GMT From: Attila Nagy <bra@fsn.hu> To: freebsd-gnats-submit@FreeBSD.org Subject: www/83518: dmesg of an HP DL145G2 Message-ID: <200507151637.j6FGbGVq046583@www.freebsd.org> Resent-Message-ID: <200507151640.j6FGeNov054167@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 83518 >Category: www >Synopsis: dmesg of an HP DL145G2 >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-www >State: open >Quarter: >Keywords: >Date-Required: >Class: update >Submitter-Id: current-users >Arrival-Date: Fri Jul 15 16:40:22 GMT 2005 >Closed-Date: >Last-Modified: >Originator: Attila Nagy >Release: 6.0 >Organization: FSN >Environment: FreeBSD eger 6.0-BETA FreeBSD 6.0-BETA #7: Fri Jul 15 18:19:31 CEST 2005 root@eger:/usr/obj/usr/src/sys/EGER amd64 >Description: dmesg from an HP DL145G2. Please update http://www.freebsd.org/platforms/amd64/motherboards.html to include this. The machine works, but did not recognize the hard disk with 5.4/amd64 (with i386 it works). FreeBSD 6.0 sees everything. The machine has 4 GB RAM. Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA #7: Fri Jul 15 18:19:31 CEST 2005 root@eger:/usr/obj/usr/src/sys/EGER ACPI APIC Table: <PTLTD APIC > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Opteron(tm) Processor 252 (2612.05-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f51 Stepping = 1 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory = 5368709120 (5120 MB) avail memory = 4119322624 (3928 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 1.1> irqs 0-23 on motherboard ioapic1 <Version 1.1> irqs 24-30 on motherboard ioapic2 <Version 1.1> irqs 31-37 on motherboard acpi0: <PTLTD RSDT> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNK1> irq 0 on acpi0 pci_link1: <ACPI PCI Link LNK2> irq 0 on acpi0 pci_link2: <ACPI PCI Link LNK3> irq 0 on acpi0 pci_link3: <ACPI PCI Link LNK4> irq 0 on acpi0 pci_link4: <ACPI PCI Link LNK5> irq 0 on acpi0 pci_link5: <ACPI PCI Link LSMB> irq 0 on acpi0 pci_link6: <ACPI PCI Link LUS0> irq 0 on acpi0 pci_link7: <ACPI PCI Link LUS2> irq 0 on acpi0 pci_link8: <ACPI PCI Link LPID> irq 0 on acpi0 pci_link9: <ACPI PCI Link LSI1> irq 0 on acpi0 pci_link10: <ACPI PCI Link APCP> irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci_link6: BIOS IRQ 10 for -2146070552.2.INTA is invalid pci_link7: BIOS IRQ 11 for -2146070552.2.INTB is invalid pci_link9: BIOS IRQ 10 for -2146070552.8.INTA is invalid pci0: <ACPI PCI bus> on pcib0 pci_link6: Unable to choose an IRQ pci_link7: Unable to choose an IRQ pci_link9: Unable to choose an IRQ pci0: <memory> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> port 0x8c00-0x8fff at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xc8000000-0xc8000fff irq 20 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc8001000-0xc80010ff irq 21 at device 2.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 4 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1400-0x140f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce4 SATA150 controller> port 0x1430-0x1437,0x1424-0x1427,0x1428-0x142f,0x1420-0x1423,0x1410-0x141f mem 0xc8002000-0xc8002fff irq 22 at device 8.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci_link0: Unable to choose an IRQ pci1: <display, VGA> at device 5.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci2: <ACPI PCI bus> on pcib2 bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xca000000-0xca00ffff irq 16 at device 0.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:13:21:b5:53:94 pcib3: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci_link3: Unable to choose an IRQ bge1: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xca100000-0xca10ffff irq 19 at device 0.0 on pci3 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:13:21:b5:53:95 pcib4: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI Host-PCI bridge> on acpi0 pci128: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 1.0 on pci128 pci129: <ACPI PCI bus> on pcib6 pci128: <base peripheral, interrupt controller> at device 1.1 (no driver attached) pcib7: <ACPI PCI-PCI bridge> at device 2.0 on pci128 pci134: <ACPI PCI bus> on pcib7 pci128: <base peripheral, interrupt controller> at device 2.1 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad4: 76319MB <Maxtor 6Y080M0 YAR511W0> at ata2-master SATA150 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s1a >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200507151637.j6FGbGVq046583>