Date: Wed, 27 Nov 2002 14:27:27 -0400 (AST) From: "Marc G. Fournier" <scrappy@hub.org> To: "Long, Scott" <Scott_Long@adaptec.com> Cc: freebsd-stable@FreeBSD.ORG Subject: RE: Upgrade from 4.6-STABLE (July) to 4.7-STABLE loses SCSI card? Message-ID: <20021127142226.G16724-100000@hub.org> In-Reply-To: <6100BCEB85F8E244959C756C04E0EDD161CBBD@otcexc01.otc.adaptec.com>
next in thread | previous in thread | raw e-mail | index | archive | help
my oops on this, forgot the hardware that was in it ... the onboard comes
up as ahc0, then we have a dual-channel adaptec that takes ahc1 and 2 ...
jut went over the hardware, which is what reminded me ...
dmesg of a boot -v and pciconf -vl follows, based on an SMP-enabled
GENERIC kernel config file, just in case maybe there was a device I didn't
need in 4.6 added:
nemesis# pciconf -vl
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x03021014 rev=0x02 hdr=0x00
vendor = 'International Business Machines Corp.'
device = 'PCI-X Host Bridge'
class = bridge
subclass = HOST-PCI
none0@pci0:1:0: class=0x030000 card=0x01c51014 chip=0x8a225333 rev=0x06 hdr=0x00
vendor = 'S3 Incorporated'
device = '86C394-397 Savage 4'
class = display
subclass = VGA
chip1@pci0:2:0: class=0x068000 card=0x01131014 chip=0x010f1014 rev=0x00 hdr=0x00
vendor = 'International Business Machines Corp.'
device = 'Remote Supervisor+Serial Port+Mouse/Keyboard'
class = bridge
subclass = PCI-unknown
fxp0@pci0:3:0: class=0x020000 card=0x024d1014 chip=0x12298086 rev=0x08 hdr=0x00
vendor = 'Intel Corporation'
device = '82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
ahc0@pci0:4:0: class=0x010000 card=0x02011014 chip=0x008f9005 rev=0x02 hdr=0x00
vendor = 'Adaptec'
device = 'AIC-7892 Ultra160 SCSI Host Adapter'
class = mass storage
subclass = SCSI
none1@pci0:6:0: class=0x080800 card=0x02471014 chip=0x02461014 rev=0x00 hdr=0x00
vendor = 'International Business Machines Corp.'
class = base peripheral
isab0@pci0:15:0: class=0x060100 card=0x02001166 chip=0x02001166 rev=0x50 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'OSB4 PCI to ISA Bridge'
class = bridge
subclass = PCI-ISA
none2@pci0:15:1: class=0x01018a card=0x00000000 chip=0x02111166 rev=0x00 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'OSB4 PCI EIDE Controller'
class = mass storage
subclass = ATA
ohci0@pci0:15:2: class=0x0c0310 card=0x02201166 chip=0x02201166 rev=0x04 hdr=0x00
vendor = 'Reliance Computer Corp./ServerWorks'
device = 'OSB4 OpenHCI Compliant USB Controller'
class = serial bus
subclass = USB
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #3: Thu Nov 14 10:58:21 AST 2002
root@demeter.acadiau.ca:/usr/obj/usr/src/sys/nemesis
Calibrating clock(s) ... TSC clock: 1500238432 Hz, i8254 clock: 1193172 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium 4 (1500.26-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf11 Stepping = 1
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 3742273536 (3654564K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009cfff, 638976 bytes (156 pages)
0x002e2000 - 0xdf0e0fff, 3739217920 bytes (912895 pages)
avail memory = 3645210624 (3559776K bytes)
APIC_IO: MP table broken: 8259->APIC entry missing!
Programming 51 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 36 -> irq 9
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 4, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 14, version: 0x00320011, at 0xfeca0000
bios32: Found BIOS32 Service Directory header at 0xc00fd2d0
bios32: Entry = 0xfd2e1 (c00fd2e1) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xd31c
pnpbios: Found PnP BIOS data at 0xc00fdcf0
pnpbios: Entry = f0000:1e9d Rev = 1.0
Other BIOS signatures found:
ACPI: 000fdfe0
Preloaded elf kernel "kernel" at 0xc02b8000.
Pentium Pro MTRR support enabled
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x80001010
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=03021014)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1014, dev=0x0302, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x5333, dev=0x8a22, revid=0x06
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base fbf80000, size 19
map[14]: type 1, range 32, base f0000000, size 27
IOAPIC #0 intpin 17 -> irq 2
Freeing (NOT implemented) redirected PCI irq 4.
found-> vendor=0x1014, dev=0x010f, revid=0x00
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=2
map[10]: type 1, range 64, base fbc00000, size 21
map[18]: type 1, range 32, base 00001800, size 7
IOAPIC #0 intpin 42 -> irq 3
Freeing (NOT implemented) redirected PCI irq 5.
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=3
map[10]: type 1, range 32, base fbf7f000, size 12
map[14]: type 1, range 32, base 00001880, size 6
map[18]: type 1, range 32, base fbe00000, size 20
IOAPIC #0 intpin 41 -> irq 5
Freeing (NOT implemented) redirected PCI irq 9.
found-> vendor=0x9005, dev=0x008f, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 00001900, size 8
map[14]: type 1, range 64, base fbf7e000, size 12
found-> vendor=0x1014, dev=0x0246, revid=0x00
class=08-08-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0200, revid=0x50
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0211, revid=0x00
class=01-01-8a, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 00000700, size 4
IOAPIC #0 intpin 16 -> irq 7
Freeing (NOT implemented) redirected PCI irq 3.
found-> vendor=0x1166, dev=0x0220, revid=0x04
class=0c-03-10, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=7
map[10]: type 1, range 32, base fbf7d000, size 12
pci0: <PCI bus> on pcib0
pci0: <S3 Savage 4 graphics accelerator> (vendor=0x5333, dev=0x8a22) at 1.0
chip1: <PCI to Other bridge (vendor=1014 device=010f)> port 0x1800-0x187f mem 0xfbc00000-0xfbdfffff irq 2 at device 2.0 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x1229) at 3.0 irq 3
ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x1900-0x19ff mem 0xfbf7e000-0xfbf7efff irq 5 at device 4.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 419 instructions downloaded
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci0: <unknown card> (vendor=0x1014, dev=0x0246) at 6.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> (vendor=0x1166, dev=0x0211) at 15.1
pci0: <OHCI USB controller> (vendor=0x1166, dev=0x0220) at 15.2 irq 7
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0045
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <2 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 5, 6, 12, apic_imen: 0x00ffef9d
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
3:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
4:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
5:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
6:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
7:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
bpf: lo0 attached
Waiting 2 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
(ahc0:A:12:0): Received WDTR 1 filtered to 0
(ahc0:A:12:0): Target Initiated WDTR
(ahc0:A:12:0): Sending WDTR 0
(ahc0:A:12:0): Received SDTR period a, offset 3f
Filtered to period 0, offset 0
(ahc0:A:12:0): Target Initiated SDTR
(ahc0:A:12:0): Sending SDTR period 0, offset 0
(ahc0:A:13:0): Received WDTR 1 filtered to 0
(ahc0:A:13:0): Target Initiated WDTR
(ahc0:A:13:0): Sending WDTR 0
(ahc0:A:13:0): Received SDTR period a, offset 3f
Filtered to period 0, offset 0
(ahc0:A:13:0): Target Initiated SDTR
(ahc0:A:13:0): Sending SDTR period 0, offset 0
(ahc0:A:12:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:12:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahc0: target 12 using 16bit transfers
ahc0: target 12 synchronous at 80.0MHz DT, offset = 0x3f
(ahc0:A:13:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc0:A:13:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahc0: target 13 using 16bit transfers
ahc0: target 13 synchronous at 80.0MHz DT, offset = 0x3f
Creating DISK da0
Creating DISK da1
pass0 at ahc0 bus 0 target 9 lun 0
pass0: <IBM YGHv3 S2 0> Fixed Processor SCSI-2 device
pass0: Serial Number 1
pass0: 3.300MB/s transfers
pass1 at ahc0 bus 0 target 12 lun 0
pass1: <IBM-ESXS ST336605LC !# B243> Fixed Direct Access SCSI-3 device
pass1: Serial Number 3FP11N4W000022288KZK
pass1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
pass2 at ahc0 bus 0 target 13 lun 0
pass2: <IBM-ESXS ST336605LC !# B243> Fixed Direct Access SCSI-3 device
pass2: Serial Number 3FP11JT9000022289BNC
pass2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
pass0 at ahc0 bus 0 target 9 lun 0
pass0: <IBM YGHv3 S2 0> Fixed Processor SCSI-2 device
pass0: Serial Number 1
pass0: 3.300MB/s transfers
da0 at ahc0 bus 0 target 12 lun 0
da0: <IBM-ESXS ST336605LC !# B243> Fixed Direct Access SCSI-3 device
da0: Serial Number 3FP11N4W000022288KZK
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C)
da1 at ahc0 bus 0 target 13 lun 0
da1: <IBM-ESXS ST336605LC !# B243> Fixed Direct Access SCSI-3 device
da1: Serial Number 3FP11JT9000022289BNC
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 34715MB (71096640 512 byte sectors: 255H 63S/T 4425C)
Mounting root from ufs:/dev/da0s1a
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
start_init: trying /sbin/init
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da1s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
da0s1: type 0xa5, start 63, end = 71087624, size 71087562 : OK
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1880-0x18bf mem 0xfbe00000-0xfbefffff,0xfbf7f000-0xfbf7ffff irq 3 at device 3.0 on pci0
fxp0: using memory space register mapping
fxp0: Disabling dynamic standby mode in EEPROM
fxp0: New EEPROM ID: 0x48e0
fxp0: EEPROM checksum @ 0x3f: 0x4203 -> 0x4203
fxp0: Ethernet address 00:02:55:ac:12:d5
fxp0: PCI IDs: 8086 1229 1014 024d 0008
fxp0: Dynamic Standby mode is enabled
bpf: fxp0 attached
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ohci0: <OHCI (generic) USB controller> mem 0xfbf7d000-0xfbf7dfff irq 7 at device 15.2 on pci0
ohci0: (New OHCI DeviceId=0x02201166)
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pid 160 (nsrexecd), uid 0: exited on signal 10 (core dumped)
On Wed, 27 Nov 2002, Long, Scott wrote:
> >
> >
> > Morning all ...
> >
> > Okay, I'm confused ... just upgraded (or tried to) my server from
> > 4.6-STABLE to 4.7-STABLE, using teh exact same kernel config
> > file as I had
> > before ... 4.6-STABLE recognized two ahc cards (ahc1 and ahc2), while
> > 4.7-STABLE is only seeing one (ahc0) ...
> >
> > I checked UPDATING, and zip in there that I can tell ...
> >
> > Am a wee bit frantic over here, since its one of our key
> > mail servers
> > ... if anyone has any idea of what i may be overlooking, I'm
> > all ears ...
> > am looking through everything I can think of right now, but
> > this may be on
> > eo fthose 'so obvious I'm overlooking it' sort of things?
> >
>
> This really isn't enough information to go on. Please include 'dmesg'
> output at the very least. Also, do you have any idea why under 4.6
> it probed the controllers as 'ahc1' and 'ahc2' instead of 'ahc0' and
> 'ahc1'. Do you do some sort of device wiring in your config file?
>
> Scott
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021127142226.G16724-100000>