From owner-freebsd-i386@FreeBSD.ORG Sun Nov 26 23:10:15 2006 Return-Path: X-Original-To: freebsd-i386@hub.freebsd.org Delivered-To: freebsd-i386@hub.freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 74A2416A415 for ; Sun, 26 Nov 2006 23:10:15 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [69.147.83.40]) by mx1.FreeBSD.org (Postfix) with ESMTP id D68D143D5D for ; Sun, 26 Nov 2006 23:09:17 +0000 (GMT) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.13.4/8.13.4) with ESMTP id kAQNADND016435 for ; Sun, 26 Nov 2006 23:10:13 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.13.4/8.13.4/Submit) id kAQNADBB016434; Sun, 26 Nov 2006 23:10:13 GMT (envelope-from gnats) Date: Sun, 26 Nov 2006 23:10:13 GMT Message-Id: <200611262310.kAQNADBB016434@freefall.freebsd.org> To: freebsd-i386@FreeBSD.org From: puc-uart@oldach.net (Helge Oldach) Cc: Subject: Re: i386/105616: UART PCI device just silent... X-BeenThere: freebsd-i386@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Helge Oldach List-Id: I386-specific issues for FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 26 Nov 2006 23:10:15 -0000 The following reply was made to PR i386/105616; it has been noted by GNATS. From: puc-uart@oldach.net (Helge Oldach) To: xcllnt@mac.com (Marcel Moolenaar) Cc: FreeBSD-gnats-submit@FreeBSD.org Subject: Re: i386/105616: UART PCI device just silent... Date: Mon, 27 Nov 2006 00:00:42 +0100 (CET) --ELM82590640;-1539-0_ Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Hi Marcel, >> The "sysctl dev" delta between a "sio kernel" and an "uart kernel" is: >> >> 107,124c107,118 >> < dev.sio.4.%desc: Dolphin Peripherals 4036 >> < dev.sio.4.%driver: sio >> < dev.sio.4.%parent: puc0 >> < dev.sio.5.%desc: Dolphin Peripherals 4036 >> < dev.sio.5.%driver: sio >> < dev.sio.5.%parent: puc0 >> < dev.sio.0.%desc: Standard PC COM port >> < dev.sio.0.%driver: sio >> < dev.sio.0.%location: handle=\_SB_.PCI0.IBRG.COM1 >> < dev.sio.0.%pnpinfo: _HID=PNP0501 _UID=1 >> < dev.sio.0.%parent: acpi0 >> < dev.sio.0.wake: 0 >> < dev.sio.1.%desc: Standard PC COM port >> < dev.sio.1.%driver: sio >> < dev.sio.1.%location: handle=\_SB_.PCI0.IBRG.COM2 >> < dev.sio.1.%pnpinfo: _HID=PNP0501 _UID=2 >> < dev.sio.1.%parent: acpi0 >> < dev.sio.1.wake: 0 >> --- >>> dev.uart.2.%desc: 16550 or compatible >>> dev.uart.2.%driver: uart >>> dev.uart.2.%parent: puc0 >>> dev.uart.3.%desc: 16550 or compatible >>> dev.uart.3.%driver: uart >>> dev.uart.3.%parent: puc0 >>> dev.uart.0.%desc: 16550 or compatible >>> dev.uart.0.%driver: uart >>> dev.uart.0.%parent: isa0 >>> dev.uart.1.%desc: 16550 or compatible >>> dev.uart.1.%driver: uart >>> dev.uart.1.%parent: isa0 >> >> Maybe this gives some hint? > >One thing that strikes me as odd is that sio(4) attaches to acpi(4), >while uart(4) attaches to isa(4). Yes. That is indeed the reason why I send you this. But maybe it's just harmless. >While this has nothing to do with puc(4), I'd like to know why this >is happening. Could you send me a verbose dmesg of both kernels? Please see attached the kernel configs and verbose debugs. You will see that the kernel configs are both based on GENERIC with a lot of unused devices being explicitely disabled. This saves som 1.5 MB kernel space. Otehrwise the delta between the two currently is: --- /sys/i386/conf/HMO Thu Aug 31 16:53:24 2006 +++ /sys/i386/conf/HMO-UART Thu Nov 16 00:00:00 2006 @@ -134,7 +134,6 @@ options IPFIREWALL_FORWARD #packet destination changes device puc -options PUC_FASTINTR #options IPSEC #IP security #options IPSEC_ESP #IP security (crypto; define w/ IPSEC) @@ -142,3 +141,8 @@ #options IPSEC_FILTERGIF #filter ipsec packets from a tunnel device crypto # core crypto support options FAST_IPSEC #new IPsec (cannot define w/ IPSEC) + +nodevice sio # 8250, 16[45]50 based serial ports +# uart: newbusified driver for serial interfaces. It consolidates the sio(4), +# sab(4) and zs(4) drivers. +device uart Regards, Helge --ELM82590640;-1539-0_ Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: attachment; filename=HMO Content-Description: /sys/i386/conf/HMO Content-Transfer-Encoding: 7bit include GENERIC nodevice ahb # EISA AHA1742 family nodevice ahc # AHA2940 and onboard AIC7xxx devices nodevice ahd # AHA39320/29320 and onboard AIC79xx devices nodevice amd # AMD 53C974 (Tekram DC-390(T)) nodevice isp # Qlogic family nodevice mpt # LSI-Logic MPT-Fusion nodevice sym # NCR/Symbios Logic (newer chipsets + those of `ncr') nodevice trm # Tekram DC395U/UW/F DC315U adapters nodevice adv # Advansys SCSI adapters nodevice adw # Advansys wide SCSI adapters nodevice aha # Adaptec 154x SCSI adapters nodevice aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. nodevice bt # Buslogic/Mylex MultiMaster SCSI adapters nodevice ncv # NCR 53C500 nodevice nsp # Workbit Ninja SCSI-3 nodevice stg # TMC 18C30/18C50 nodevice amr # AMI MegaRAID nodevice arcmsr # Areca SATA II RAID nodevice asr # DPT SmartRAID V, VI and Adaptec SCSI RAID nodevice ciss # Compaq Smart RAID 5* nodevice dpt # DPT Smartcache III, IV - See NOTES for options nodevice hptmv # Highpoint RocketRAID 182x nodevice rr232x # Highpoint RocketRAID 232x nodevice iir # Intel Integrated RAID nodevice ips # IBM (Adaptec) ServeRAID nodevice mly # Mylex AcceleRAID/eXtremeRAID nodevice twa # 3ware 9000 series PATA/SATA RAID nodevice aac # Adaptec FSA RAID nodevice aacp # SCSI passthrough for aac (requires CAM) nodevice ida # Compaq Smart RAID nodevice mfi # LSI MegaRAID SAS nodevice mlx # Mylex DAC960 family nodevice pst # Promise Supertrak SX6000 nodevice twe # 3ware ATA RAID nodevice cbb # cardbus (yenta) bridge nodevice pccard # PC Card (16-bit) bus nodevice cardbus # CardBus (32-bit) bus nodevice plip # TCP/IP over parallel nodevice de # DEC/Intel DC21x4x (``Tulip'') nodevice em # Intel PRO/1000 adapter Gigabit Ethernet Card nodevice ixgb # Intel PRO/10GbE Ethernet Card nodevice txp # 3Com 3cR990 (``Typhoon'') nodevice vx # 3Com 3c590, 3c595 (``Vortex'') nodevice bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet nodevice bfe # Broadcom BCM440x 10/100 Ethernet nodevice bge # Broadcom BCM570xx Gigabit Ethernet nodevice dc # DEC/Intel 21143 and various workalikes nodevice fxp # Intel EtherExpress PRO/100B (82557, 82558) nodevice lge # Level 1 LXT1001 gigabit ethernet nodevice nge # NatSemi DP83820 gigabit ethernet nodevice nve # nVidia nForce MCP on-board Ethernet Networking nodevice pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') nodevice re # RealTek 8139C+/8169/8169S/8110S nodevice rl # RealTek 8129/8139 nodevice sf # Adaptec AIC-6915 (``Starfire'') nodevice sis # Silicon Integrated Systems SiS 900/SiS 7016 nodevice sk # SysKonnect SK-984x & SK-982x gigabit Ethernet nodevice ste # Sundance ST201 (D-Link DFE-550TX) nodevice stge # Sundance/Tamarack TC9021 gigabit Ethernet nodevice ti # Alteon Networks Tigon I/II gigabit Ethernet nodevice tl # Texas Instruments ThunderLAN nodevice tx # SMC EtherPower II (83c170 ``EPIC'') nodevice vge # VIA VT612x gigabit ethernet nodevice vr # VIA Rhine, Rhine II nodevice wb # Winbond W89C840F nodevice xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') nodevice cs # Crystal Semiconductor CS89x0 NIC nodevice ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards nodevice ex # Intel EtherExpress Pro/10 and Pro/10+ nodevice ep # Etherlink III based cards nodevice fe # Fujitsu MB8696x based cards nodevice ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. nodevice lnc # NE2100, NE32-VL Lance Ethernet cards nodevice sn # SMC's 9000 series of Ethernet chips nodevice xe # Xircom pccard Ethernet nodevice wlan # 802.11 support nodevice wlan_wep # 802.11 WEP support nodevice wlan_ccmp # 802.11 CCMP support nodevice wlan_tkip # 802.11 TKIP support nodevice an # Aironet 4500/4800 802.11 wireless NICs. nodevice ath # Atheros pci/cardbus NIC's nodevice ath_hal # Atheros HAL (Hardware Access Layer) nodevice ath_rate_sample # SampleRate tx rate control for ath nodevice awi # BayStack 660 and others nodevice ral # Ralink Technology RT2500 wireless NICs. nodevice wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. nodevice sl # Kernel SLIP nodevice ppp # Kernel PPP nodevice tun # Packet tunnel. nodevice md # Memory "disks" nodevice gif # IPv6 and IPv4 tunneling nodevice faith # IPv6-to-IPv4 relaying (translation) nodevice uhci # UHCI PCI->USB interface nodevice ohci # OHCI PCI->USB interface nodevice ehci # EHCI PCI->USB interface (USB 2.0) nodevice usb # USB Bus (required) nodevice ugen # Generic nodevice uhid # "Human Interface Devices" nodevice ukbd # Keyboard nodevice ulpt # Printer nodevice umass # Disks/Mass storage - Requires scbus and da nodevice ums # Mouse nodevice ural # Ralink Technology RT2500USB wireless NICs nodevice urio # Diamond Rio 500 MP3 player nodevice uscanner # Scanners nodevice aue # ADMtek USB Ethernet nodevice axe # ASIX Electronics USB Ethernet nodevice cdce # Generic USB over Ethernet nodevice cue # CATC USB Ethernet nodevice kue # Kawasaki LSI USB Ethernet nodevice rue # RealTek RTL8150 USB Ethernet nodevice firewire # FireWire bus code nodevice sbp # SCSI over FireWire (Requires scbus and da) nodevice fwe # Ethernet over FireWire (non-standard!) nooption NFSCLIENT # Network Filesystem Client nooption NFSSERVER # Network Filesystem Server nooption NFS_ROOT # NFS usable as /, requires NFSCLIENT nooption MSDOSFS # MSDOS Filesystem nooption CD9660 # ISO 9660 Filesystem nooption PROCFS # Process filesystem (requires PSEUDOFS) nooption PSEUDOFS # Pseudo-filesystem framework options IPFIREWALL #firewall options IPFIREWALL_FORWARD #packet destination changes device puc options PUC_FASTINTR #options IPSEC #IP security #options IPSEC_ESP #IP security (crypto; define w/ IPSEC) #options IPSEC_DEBUG #debug for IP security #options IPSEC_FILTERGIF #filter ipsec packets from a tunnel device crypto # core crypto support options FAST_IPSEC #new IPsec (cannot define w/ IPSEC) --ELM82590640;-1539-0_ Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: attachment; filename=HMO.dmesg Content-Description: /tmp/HMO.dmesg Content-Transfer-Encoding: 7bit Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-615 #0: Mon Nov 20 15:58:20 CET 2006 toor@sep.oldach.net:/usr/obj/usr/src/sys/HMO Preloaded elf kernel "/boot/kernel/kernel" at 0xc08a3000. Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc08a30cc. Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08a3178. Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08a3224. Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc08a32d0. Preloaded elf module "/boot/kernel/sound.ko" at 0xc08a337c. Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc08a3428. Preloaded elf module "/boot/kernel/usb.ko" at 0xc08a34d4. Preloaded elf module "/boot/kernel/ugen.ko" at 0xc08a357c. Preloaded elf module "/boot/kernel/umass.ko" at 0xc08a3628. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08a36d4. Preloaded elf module "/boot/kernel/cbb.ko" at 0xc08a3780. Preloaded elf module "/boot/kernel/exca.ko" at 0xc08a3828. Preloaded elf module "/boot/kernel/pccard.ko" at 0xc08a38d4. Preloaded elf module "/boot/kernel/sym.ko" at 0xc08a3980. Preloaded elf module "/boot/kernel/uplcom.ko" at 0xc08a3a28. Preloaded elf module "/boot/kernel/ucom.ko" at 0xc08a3ad4. Preloaded elf module "/boot/kernel/uvisor.ko" at 0xc08a3b80. Preloaded elf module "/boot/kernel/wlan_wep.ko" at 0xc08a3c2c. Preloaded elf module "/boot/kernel/if_bridge.ko" at 0xc08a3cdc. Calibrating clock(s) ... i8254 clock: 1193072 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 646666138 Hz CPU: Intel Pentium III (646.67-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff real memory = 402653184 (384 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x00000000178fcfff, 382566400 bytes (93400 pages) avail memory = 384528384 (366 MB) bios32: Found BIOS32 Service Directory header at 0xc00fa000 bios32: Entry = 0xec700 (c00ec700) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xec700+0x11a0 pnpbios: Found PnP BIOS data at 0xc00f7db0 pnpbios: Entry = f0000:6480 Rev = 1.0 pnpbios: OEM ID b5b0110e Other BIOS signatures found: wlan: <802.11 Link Layer> crypto: random: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: io: npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x00000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 Found $PIR table, 9 entries at 0xc00edd10 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 1 0 13 A 0x60 3 4 5 6 7 9 10 11 slot 1 0 13 B 0x61 3 4 5 6 7 9 10 11 slot 1 0 13 C 0x62 3 4 5 6 7 9 10 11 slot 1 0 13 D 0x63 3 4 5 6 7 9 10 11 slot 2 0 14 A 0x61 3 4 5 6 7 9 10 11 slot 2 0 14 B 0x62 3 4 5 6 7 9 10 11 slot 2 0 14 C 0x63 3 4 5 6 7 9 10 11 slot 2 0 14 D 0x60 3 4 5 6 7 9 10 11 slot 3 0 15 A 0x62 3 4 5 6 7 9 10 11 slot 3 0 15 B 0x63 3 4 5 6 7 9 10 11 slot 3 0 15 C 0x60 3 4 5 6 7 9 10 11 slot 3 0 15 D 0x61 3 4 5 6 7 9 10 11 slot 4 0 16 A 0x63 3 4 5 6 7 9 10 11 slot 4 0 16 B 0x60 3 4 5 6 7 9 10 11 slot 4 0 16 C 0x61 3 4 5 6 7 9 10 11 slot 4 0 16 D 0x62 3 4 5 6 7 9 10 11 slot 5 0 18 A 0x61 3 4 5 6 7 9 10 11 slot 5 0 18 B 0x62 3 4 5 6 7 9 10 11 slot 5 0 18 C 0x63 3 4 5 6 7 9 10 11 slot 5 0 18 D 0x60 3 4 5 6 7 9 10 11 embedded 0 12 A 0x60 3 4 5 6 7 9 10 11 embedded 0 12 B 0x61 3 4 5 6 7 9 10 11 embedded 0 12 C 0x62 3 4 5 6 7 9 10 11 embedded 0 12 D 0x63 3 4 5 6 7 9 10 11 embedded 0 20 D 0x63 3 4 5 6 7 9 10 11 embedded 0 1 A 0x62 3 4 5 6 7 9 10 11 embedded 0 1 B 0x63 3 4 5 6 7 9 10 11 embedded 0 11 A 0x61 3 4 5 6 7 9 10 11 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 20 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 20 func 2 acpi0: wakeup code va 0xca4b3000 pa 0x9e000 atpic: Programming IRQ9 as level/low acpi: bad write to port 0x070 (8), val 0x31 acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x30 acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x31 acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x30 acpi: bad read from port 0x071 (8) ACPI timer: 0/4 0/3 0/4 0/5 0/4 0/3 0/3 0/4 0/3 0/4 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0xf810 pcib0: port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.13.INTA at func 0: 11 ACPI: Found matching pin for 0.14.INTA at func 0: 10 ACPI: Found matching pin for 0.15.INTA at func 0: 11 ACPI: Found matching pin for 0.16.INTA at func 0: 255 ACPI: Found matching pin for 0.20.INTD at func 2: 11 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x3210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base 44000000, size 26, enabled found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=13, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 41300000, size 12, enabled map[14]: type 4, range 32, base 00002040, size 6, enabled map[18]: type 1, range 32, base 41200000, size 20, enabled pcib0: matched entry for 0.13.INTA (src \\_SB_.LNKA:0) pcib0: slot 13 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x1409, dev=0x7168, revid=0x01 bus=0, slot=14, func=0 class=07-00-02, hdrtype=0x00, mfdev=0 cmdreg=0x0081, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type 4, range 32, base 00002000, size 5, enabled pcib0: matched entry for 0.14.INTA (src \\_SB_.LNKB:0) pcib0: slot 14 INTA routed to irq 10 via \\_SB_.LNKB found-> vendor=0x1000, dev=0x0001, revid=0x02 bus=0, slot=15, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x42 (1980 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 1, range 32, base 41100000, size 8, enabled pcib0: matched entry for 0.15.INTA (src \\_SB_.LNKC:0) pcib0: slot 15 INTA routed to irq 11 via \\_SB_.LNKC found-> vendor=0x104c, dev=0xac1e, revid=0x00 bus=0, slot=16, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0004, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=20, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=20, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 000020e0, size 4, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=20, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type 4, range 32, base 000020c0, size 5, enabled pcib0: matched entry for 0.20.INTD (src \\_SB_.LNKD:0) pcib0: slot 20 INTD routed to irq 11 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=20, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type 4, range 32, base 0000fc00, size 4, enabled agp0: mem 0x44000000-0x47ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x44000000 agp0: allocating GATT for aperture of size 64M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x1000-0x1fff pcib1: memory decode 0x40000000-0x410fffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x4742, revid=0x5c bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 1, range 32, base 40000000, size 24, enabled pcib1: (null) requested memory range 0x40000000-0x40ffffff: good map[14]: type 4, range 32, base 00001000, size 8, enabled pcib1: (null) requested I/O range 0x1000-0x10ff: in range map[18]: type 1, range 32, base 41000000, size 12, enabled pcib1: (null) requested memory range 0x41000000-0x41000fff: good pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKC:0) pcib0: slot 1 INTA routed to irq 11 via \\_SB_.LNKC pcib1: slot 0 INTA is routed to irq 11 pci1: at device 0.0 (no driver attached) fxp0: port 0x2040-0x207f mem 0x41300000-0x41300fff,0x41200000-0x412fffff irq 11 at device 13.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41300000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 000e 0008 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:90:27:88:10:e6 fxp0: [MPSAFE] puc0: port 0x2000-0x201f irq 10 at device 14.0 on pci0 puc0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x2000 sio4: on puc0 sio4: type 16550A sio5: on puc0 sio5: type 16550A sym0: <810> port 0x2400-0x24ff mem 0x41100000-0x411000ff irq 11 at device 15.0 on pci0 sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x41100000 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. sym0: [GIANT-LOCKED] cbb0: at device 16.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 pccard0: <16-bit PCCard bus> on cbb0 pcib0: matched entry for 0.16.INTA (src \\_SB_.LNKD:0) pcib0: slot 16 INTA routed to irq 11 via \\_SB_.LNKD cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac1e104c 0x02100007 0x06070000 0x00024208 0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00000000 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0044b060 0x00000000 0x00000000 0x00000022 0x90: 0x616600c0 0x00000000 0x00000000 0x00000000 0xa0: 0x7e210001 0x00c00000 0x0000000b 0x0000001f 0xb0: 0x09000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 isab0: at device 20.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20e0-0x20ef at device 20.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x20e0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x52 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=52 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=00 ostat1=50 ata1: stat0=0x00 err=0x50 lsb=0x00 msb=0x00 ata1: stat1=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=50 devices=0x2 ata1: [MPSAFE] uhci0: port 0x20c0-0x20df irq 11 at device 20.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20c0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 20.3 (no driver attached) acpi_button0: on acpi0 psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model MouseMan+, device ID 0-51, 3 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:08, syncbits:00 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1: port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: port 0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sbc0: port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on acpi0 sbc0: [GIANT-LOCKED] pcm0: on sbc0 pcm0: ESS1869 detected, newspeed pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap ff4000, 1000; 0xd52b4000 -> ff4000 pcm0: sndbuf_setmap ff3000, 1000; 0xd52b5000 -> ff3000 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xe0000-0xe7fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices ugen0: vendor 0x05a9 product 0xa511, rev 1.00/1.00, addr 2 uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.08, addr 3 uhub1: 4 ports with 4 removable, self powered ucom0: vendor 0x067b product 0x2303, rev 1.10/2.02, addr 4 Device configuration finished. Timecounter "TSC" frequency 646666138 Hz quality 800 Timecounters tick every 1.000 msec crypto: assign driver 0, flags 6 crypto: driver 0 registers alg 1 flags 0 maxoplen 0 crypto: driver 0 registers alg 2 flags 0 maxoplen 0 crypto: driver 0 registers alg 3 flags 0 maxoplen 0 crypto: driver 0 registers alg 4 flags 0 maxoplen 0 crypto: driver 0 registers alg 5 flags 0 maxoplen 0 crypto: driver 0 registers alg 16 flags 0 maxoplen 0 crypto: driver 0 registers alg 6 flags 0 maxoplen 0 crypto: driver 0 registers alg 7 flags 0 maxoplen 0 crypto: driver 0 registers alg 18 flags 0 maxoplen 0 crypto: driver 0 registers alg 19 flags 0 maxoplen 0 crypto: driver 0 registers alg 20 flags 0 maxoplen 0 crypto: driver 0 registers alg 8 flags 0 maxoplen 0 crypto: driver 0 registers alg 15 flags 0 maxoplen 0 crypto: driver 0 registers alg 9 flags 0 maxoplen 0 crypto: driver 0 registers alg 10 flags 0 maxoplen 0 crypto: driver 0 registers alg 13 flags 0 maxoplen 0 crypto: driver 0 registers alg 14 flags 0 maxoplen 0 crypto: driver 0 registers alg 11 flags 0 maxoplen 0 crypto: driver 0 registers alg 17 flags 0 maxoplen 0 Fast IPsec: Initialized Security Association Processing. ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to deny, logging disabled lo0: bpf attached pccard0: CIS version PC Card Standard 5.0 pccard0: CIS info: LG, 11Mbps Wireless LAN PCI Card, Version 01.02, pccard0: Manufacturer code 0x156, product 0x2 pccard0: function 0: network adapter, ccr addr 3e0 mask 1 pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 wi0: at port 0x100-0x13f irq 11 function 0 config 1 on pccard0 wi0: [MPSAFE] wi0: using RF:PRISM2.5 MAC:ISL3873 wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9) wi0: bpf attached wi0: Ethernet address: 00:04:47:50:15:3a wi0: bpf attached wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire ad0: setting PIO4 on PIIX4 chip ad0: setting UDMA33 on PIIX4 chip ad0: 19595MB at ata0-master UDMA33 ad0: 40132503 sectors [42468C/15H/63S] 16 sectors/interrupt 1 depth queue ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad3: setting PIO4 on PIIX4 chip ad3: setting UDMA33 on PIIX4 chip ad3: 19470MB at ata1-slave UDMA33 ad3: 39876480 sectors [42197C/15H/63S] 16 sectors/interrupt 1 depth queue ad3: Intel check1 failed ad3: Adaptec check1 failed ad3: LSI (v3) check1 failed ad3: LSI (v2) check1 failed ad3: FreeBSD check1 failed Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (probe3:sym0:0:3:0): Retrying Command (probe3:sym0:0:3:0): error 22 (probe3:sym0:0:3:0): Unretryable Error pass0 at sym0 bus 0 target 3 lun 0 pass0: Removable CD-ROM SCSI-2 device pass0: 4.237MB/s transfers (4.237MHz, offset 8) ATA PseudoRAID loaded (cd0:sym0:0:3:0): Retrying Command cd0 at sym0 bus 0 target 3 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 4.237MB/s transfers (4.237MHz, offset 8) cd0: cd present [296339 x 2048 byte records] GEOM: new disk ad0 GEOM: new disk ad3 GEOM: new disk cd0 Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init --ELM82590640;-1539-0_ Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: attachment; filename=HMO-UART Content-Description: /sys/i386/conf/HMO-UART Content-Transfer-Encoding: 7bit include GENERIC nodevice ahb # EISA AHA1742 family nodevice ahc # AHA2940 and onboard AIC7xxx devices nodevice ahd # AHA39320/29320 and onboard AIC79xx devices nodevice amd # AMD 53C974 (Tekram DC-390(T)) nodevice isp # Qlogic family nodevice mpt # LSI-Logic MPT-Fusion nodevice sym # NCR/Symbios Logic (newer chipsets + those of `ncr') nodevice trm # Tekram DC395U/UW/F DC315U adapters nodevice adv # Advansys SCSI adapters nodevice adw # Advansys wide SCSI adapters nodevice aha # Adaptec 154x SCSI adapters nodevice aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. nodevice bt # Buslogic/Mylex MultiMaster SCSI adapters nodevice ncv # NCR 53C500 nodevice nsp # Workbit Ninja SCSI-3 nodevice stg # TMC 18C30/18C50 nodevice amr # AMI MegaRAID nodevice arcmsr # Areca SATA II RAID nodevice asr # DPT SmartRAID V, VI and Adaptec SCSI RAID nodevice ciss # Compaq Smart RAID 5* nodevice dpt # DPT Smartcache III, IV - See NOTES for options nodevice hptmv # Highpoint RocketRAID 182x nodevice rr232x # Highpoint RocketRAID 232x nodevice iir # Intel Integrated RAID nodevice ips # IBM (Adaptec) ServeRAID nodevice mly # Mylex AcceleRAID/eXtremeRAID nodevice twa # 3ware 9000 series PATA/SATA RAID nodevice aac # Adaptec FSA RAID nodevice aacp # SCSI passthrough for aac (requires CAM) nodevice ida # Compaq Smart RAID nodevice mfi # LSI MegaRAID SAS nodevice mlx # Mylex DAC960 family nodevice pst # Promise Supertrak SX6000 nodevice twe # 3ware ATA RAID nodevice cbb # cardbus (yenta) bridge nodevice pccard # PC Card (16-bit) bus nodevice cardbus # CardBus (32-bit) bus nodevice plip # TCP/IP over parallel nodevice de # DEC/Intel DC21x4x (``Tulip'') nodevice em # Intel PRO/1000 adapter Gigabit Ethernet Card nodevice ixgb # Intel PRO/10GbE Ethernet Card nodevice txp # 3Com 3cR990 (``Typhoon'') nodevice vx # 3Com 3c590, 3c595 (``Vortex'') nodevice bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet nodevice bfe # Broadcom BCM440x 10/100 Ethernet nodevice bge # Broadcom BCM570xx Gigabit Ethernet nodevice dc # DEC/Intel 21143 and various workalikes nodevice fxp # Intel EtherExpress PRO/100B (82557, 82558) nodevice lge # Level 1 LXT1001 gigabit ethernet nodevice nge # NatSemi DP83820 gigabit ethernet nodevice nve # nVidia nForce MCP on-board Ethernet Networking nodevice pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') nodevice re # RealTek 8139C+/8169/8169S/8110S nodevice rl # RealTek 8129/8139 nodevice sf # Adaptec AIC-6915 (``Starfire'') nodevice sis # Silicon Integrated Systems SiS 900/SiS 7016 nodevice sk # SysKonnect SK-984x & SK-982x gigabit Ethernet nodevice ste # Sundance ST201 (D-Link DFE-550TX) nodevice stge # Sundance/Tamarack TC9021 gigabit Ethernet nodevice ti # Alteon Networks Tigon I/II gigabit Ethernet nodevice tl # Texas Instruments ThunderLAN nodevice tx # SMC EtherPower II (83c170 ``EPIC'') nodevice vge # VIA VT612x gigabit ethernet nodevice vr # VIA Rhine, Rhine II nodevice wb # Winbond W89C840F nodevice xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') nodevice cs # Crystal Semiconductor CS89x0 NIC nodevice ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards nodevice ex # Intel EtherExpress Pro/10 and Pro/10+ nodevice ep # Etherlink III based cards nodevice fe # Fujitsu MB8696x based cards nodevice ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. nodevice lnc # NE2100, NE32-VL Lance Ethernet cards nodevice sn # SMC's 9000 series of Ethernet chips nodevice xe # Xircom pccard Ethernet nodevice wlan # 802.11 support nodevice wlan_wep # 802.11 WEP support nodevice wlan_ccmp # 802.11 CCMP support nodevice wlan_tkip # 802.11 TKIP support nodevice an # Aironet 4500/4800 802.11 wireless NICs. nodevice ath # Atheros pci/cardbus NIC's nodevice ath_hal # Atheros HAL (Hardware Access Layer) nodevice ath_rate_sample # SampleRate tx rate control for ath nodevice awi # BayStack 660 and others nodevice ral # Ralink Technology RT2500 wireless NICs. nodevice wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. nodevice sl # Kernel SLIP nodevice ppp # Kernel PPP nodevice tun # Packet tunnel. nodevice md # Memory "disks" nodevice gif # IPv6 and IPv4 tunneling nodevice faith # IPv6-to-IPv4 relaying (translation) nodevice uhci # UHCI PCI->USB interface nodevice ohci # OHCI PCI->USB interface nodevice ehci # EHCI PCI->USB interface (USB 2.0) nodevice usb # USB Bus (required) nodevice ugen # Generic nodevice uhid # "Human Interface Devices" nodevice ukbd # Keyboard nodevice ulpt # Printer nodevice umass # Disks/Mass storage - Requires scbus and da nodevice ums # Mouse nodevice ural # Ralink Technology RT2500USB wireless NICs nodevice urio # Diamond Rio 500 MP3 player nodevice uscanner # Scanners nodevice aue # ADMtek USB Ethernet nodevice axe # ASIX Electronics USB Ethernet nodevice cdce # Generic USB over Ethernet nodevice cue # CATC USB Ethernet nodevice kue # Kawasaki LSI USB Ethernet nodevice rue # RealTek RTL8150 USB Ethernet nodevice firewire # FireWire bus code nodevice sbp # SCSI over FireWire (Requires scbus and da) nodevice fwe # Ethernet over FireWire (non-standard!) nooption NFSCLIENT # Network Filesystem Client nooption NFSSERVER # Network Filesystem Server nooption NFS_ROOT # NFS usable as /, requires NFSCLIENT nooption MSDOSFS # MSDOS Filesystem nooption CD9660 # ISO 9660 Filesystem nooption PROCFS # Process filesystem (requires PSEUDOFS) nooption PSEUDOFS # Pseudo-filesystem framework options IPFIREWALL #firewall options IPFIREWALL_FORWARD #packet destination changes device puc #options IPSEC #IP security #options IPSEC_ESP #IP security (crypto; define w/ IPSEC) #options IPSEC_DEBUG #debug for IP security #options IPSEC_FILTERGIF #filter ipsec packets from a tunnel device crypto # core crypto support options FAST_IPSEC #new IPsec (cannot define w/ IPSEC) nodevice sio # 8250, 16[45]50 based serial ports # uart: newbusified driver for serial interfaces. It consolidates the sio(4), # sab(4) and zs(4) drivers. device uart --ELM82590640;-1539-0_ Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: attachment; filename=HMO-UART.dmesg Content-Description: /tmp/HMO-UART.dmesg Content-Transfer-Encoding: 7bit Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-615 #0: Mon Nov 20 16:43:26 CET 2006 toor@sep.oldach.net:/usr/obj/usr/src/sys/HMO-UART Preloaded elf kernel "/boot/kernel/kernel" at 0xc08a7000. Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc08a70cc. Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08a7178. Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08a7224. Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc08a72d0. Preloaded elf module "/boot/kernel/sound.ko" at 0xc08a737c. Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc08a7428. Preloaded elf module "/boot/kernel/usb.ko" at 0xc08a74d4. Preloaded elf module "/boot/kernel/ugen.ko" at 0xc08a757c. Preloaded elf module "/boot/kernel/umass.ko" at 0xc08a7628. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08a76d4. Preloaded elf module "/boot/kernel/cbb.ko" at 0xc08a7780. Preloaded elf module "/boot/kernel/exca.ko" at 0xc08a7828. Preloaded elf module "/boot/kernel/pccard.ko" at 0xc08a78d4. Preloaded elf module "/boot/kernel/sym.ko" at 0xc08a7980. Preloaded elf module "/boot/kernel/uplcom.ko" at 0xc08a7a28. Preloaded elf module "/boot/kernel/ucom.ko" at 0xc08a7ad4. Preloaded elf module "/boot/kernel/uvisor.ko" at 0xc08a7b80. Preloaded elf module "/boot/kernel/wlan_wep.ko" at 0xc08a7c2c. Preloaded elf module "/boot/kernel/if_bridge.ko" at 0xc08a7cdc. Calibrating clock(s) ... i8254 clock: 1193072 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 646665859 Hz CPU: Intel Pentium III (646.67-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff real memory = 402653184 (384 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x00000000178fcfff, 382566400 bytes (93400 pages) avail memory = 384528384 (366 MB) bios32: Found BIOS32 Service Directory header at 0xc00fa000 bios32: Entry = 0xec700 (c00ec700) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xec700+0x11a0 pnpbios: Found PnP BIOS data at 0xc00f7db0 pnpbios: Entry = f0000:6480 Rev = 1.0 pnpbios: OEM ID b5b0110e Other BIOS signatures found: wlan: <802.11 Link Layer> crypto: random: kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: io: npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x00000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 Found $PIR table, 9 entries at 0xc00edd10 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 1 0 13 A 0x60 3 4 5 6 7 9 10 11 slot 1 0 13 B 0x61 3 4 5 6 7 9 10 11 slot 1 0 13 C 0x62 3 4 5 6 7 9 10 11 slot 1 0 13 D 0x63 3 4 5 6 7 9 10 11 slot 2 0 14 A 0x61 3 4 5 6 7 9 10 11 slot 2 0 14 B 0x62 3 4 5 6 7 9 10 11 slot 2 0 14 C 0x63 3 4 5 6 7 9 10 11 slot 2 0 14 D 0x60 3 4 5 6 7 9 10 11 slot 3 0 15 A 0x62 3 4 5 6 7 9 10 11 slot 3 0 15 B 0x63 3 4 5 6 7 9 10 11 slot 3 0 15 C 0x60 3 4 5 6 7 9 10 11 slot 3 0 15 D 0x61 3 4 5 6 7 9 10 11 slot 4 0 16 A 0x63 3 4 5 6 7 9 10 11 slot 4 0 16 B 0x60 3 4 5 6 7 9 10 11 slot 4 0 16 C 0x61 3 4 5 6 7 9 10 11 slot 4 0 16 D 0x62 3 4 5 6 7 9 10 11 slot 5 0 18 A 0x61 3 4 5 6 7 9 10 11 slot 5 0 18 B 0x62 3 4 5 6 7 9 10 11 slot 5 0 18 C 0x63 3 4 5 6 7 9 10 11 slot 5 0 18 D 0x60 3 4 5 6 7 9 10 11 embedded 0 12 A 0x60 3 4 5 6 7 9 10 11 embedded 0 12 B 0x61 3 4 5 6 7 9 10 11 embedded 0 12 C 0x62 3 4 5 6 7 9 10 11 embedded 0 12 D 0x63 3 4 5 6 7 9 10 11 embedded 0 20 D 0x63 3 4 5 6 7 9 10 11 embedded 0 1 A 0x62 3 4 5 6 7 9 10 11 embedded 0 1 B 0x63 3 4 5 6 7 9 10 11 embedded 0 11 A 0x61 3 4 5 6 7 9 10 11 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 20 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 20 func 2 acpi0: wakeup code va 0xca4b3000 pa 0x9e000 atpic: Programming IRQ9 as level/low acpi: bad write to port 0x070 (8), val 0x31 acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x30 acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x31 acpi: bad read from port 0x071 (8) acpi: bad write to port 0x070 (8), val 0x30 acpi: bad read from port 0x071 (8) ACPI timer: 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 cpu0: on acpi0 acpi_throttle0: on cpu0 acpi_throttle0: P_CNT from P_BLK 0xf810 pcib0: port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.13.INTA at func 0: 11 ACPI: Found matching pin for 0.14.INTA at func 0: 10 ACPI: Found matching pin for 0.15.INTA at func 0: 11 ACPI: Found matching pin for 0.16.INTA at func 0: 255 ACPI: Found matching pin for 0.20.INTD at func 2: 11 pci0: on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x3210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base 44000000, size 26, enabled found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=13, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 41300000, size 12, enabled map[14]: type 4, range 32, base 00002040, size 6, enabled map[18]: type 1, range 32, base 41200000, size 20, enabled pcib0: matched entry for 0.13.INTA (src \\_SB_.LNKA:0) pcib0: slot 13 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x1409, dev=0x7168, revid=0x01 bus=0, slot=14, func=0 class=07-00-02, hdrtype=0x00, mfdev=0 cmdreg=0x0081, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type 4, range 32, base 00002000, size 5, enabled pcib0: matched entry for 0.14.INTA (src \\_SB_.LNKB:0) pcib0: slot 14 INTA routed to irq 10 via \\_SB_.LNKB found-> vendor=0x1000, dev=0x0001, revid=0x02 bus=0, slot=15, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x42 (1980 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 1, range 32, base 41100000, size 8, enabled pcib0: matched entry for 0.15.INTA (src \\_SB_.LNKC:0) pcib0: slot 15 INTA routed to irq 11 via \\_SB_.LNKC found-> vendor=0x104c, dev=0xac1e, revid=0x00 bus=0, slot=16, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0004, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=20, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=20, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 000020e0, size 4, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=20, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type 4, range 32, base 000020c0, size 5, enabled pcib0: matched entry for 0.20.INTD (src \\_SB_.LNKD:0) pcib0: slot 20 INTD routed to irq 11 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=20, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type 4, range 32, base 0000fc00, size 4, enabled agp0: mem 0x44000000-0x47ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0x44000000 agp0: allocating GATT for aperture of size 64M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x1000-0x1fff pcib1: memory decode 0x40000000-0x410fffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x4742, revid=0x5c bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type 1, range 32, base 40000000, size 24, enabled pcib1: (null) requested memory range 0x40000000-0x40ffffff: good map[14]: type 4, range 32, base 00001000, size 8, enabled pcib1: (null) requested I/O range 0x1000-0x10ff: in range map[18]: type 1, range 32, base 41000000, size 12, enabled pcib1: (null) requested memory range 0x41000000-0x41000fff: good pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKC:0) pcib0: slot 1 INTA routed to irq 11 via \\_SB_.LNKC pcib1: slot 0 INTA is routed to irq 11 pci1: at device 0.0 (no driver attached) fxp0: port 0x2040-0x207f mem 0x41300000-0x41300fff,0x41200000-0x412fffff irq 11 at device 13.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41300000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 8086 000e 0008 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:90:27:88:10:e6 fxp0: [MPSAFE] puc0: port 0x2000-0x201f irq 10 at device 14.0 on pci0 puc0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x2000 uart2: <16550 or compatible> on puc0 uart3: <16550 or compatible> on puc0 sym0: <810> port 0x2400-0x24ff mem 0x41100000-0x411000ff irq 11 at device 15.0 on pci0 sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x41100000 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. sym0: [GIANT-LOCKED] cbb0: at device 16.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 pccard0: <16-bit PCCard bus> on cbb0 pcib0: matched entry for 0.16.INTA (src \\_SB_.LNKD:0) pcib0: slot 16 INTA routed to irq 11 via \\_SB_.LNKD cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac1e104c 0x02100007 0x06070000 0x00024208 0x10: 0x80000000 0x020000a0 0x20030200 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00000000 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0044b060 0x00000000 0x00000000 0x00000022 0x90: 0x616600c0 0x00000000 0x00000000 0x00000000 0xa0: 0x7e210001 0x00c00000 0x0000000b 0x0000001f 0xb0: 0x09000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 isab0: at device 20.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20e0-0x20ef at device 20.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x20e0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=00 ostat1=50 ata1: stat0=0x00 err=0x10 lsb=0x00 msb=0x00 ata1: stat1=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=50 devices=0x2 ata1: [MPSAFE] uhci0: port 0x20c0-0x20df irq 11 at device 20.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x20c0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at device 20.3 (no driver attached) acpi_button0: on acpi0 psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model MouseMan+, device ID 0-51, 3 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:08, syncbits:00 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 fdc0: port 0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sbc0: port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on acpi0 sbc0: [GIANT-LOCKED] pcm0: on sbc0 pcm0: ESS1869 detected, newspeed pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap ff3000, 1000; 0xd52b5000 -> ff3000 pcm0: sndbuf_setmap ff2000, 1000; 0xd52b6000 -> ff2000 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xe0000-0xe7fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 uart0: fast interrupt uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 uart1: fast interrupt vt0: not probed (disabled) isa_probe_children: probing PnP devices ugen0: vendor 0x05a9 product 0xa511, rev 1.00/1.00, addr 2 uhub1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.08, addr 3 uhub1: 4 ports with 4 removable, self powered ucom0: vendor 0x067b product 0x2303, rev 1.10/2.02, addr 4 Device configuration finished. Timecounter "TSC" frequency 646665859 Hz quality 800 Timecounters tick every 1.000 msec crypto: assign driver 0, flags 6 crypto: driver 0 registers alg 1 flags 0 maxoplen 0 crypto: driver 0 registers alg 2 flags 0 maxoplen 0 crypto: driver 0 registers alg 3 flags 0 maxoplen 0 crypto: driver 0 registers alg 4 flags 0 maxoplen 0 crypto: driver 0 registers alg 5 flags 0 maxoplen 0 crypto: driver 0 registers alg 16 flags 0 maxoplen 0 crypto: driver 0 registers alg 6 flags 0 maxoplen 0 crypto: driver 0 registers alg 7 flags 0 maxoplen 0 crypto: driver 0 registers alg 18 flags 0 maxoplen 0 crypto: driver 0 registers alg 19 flags 0 maxoplen 0 crypto: driver 0 registers alg 20 flags 0 maxoplen 0 crypto: driver 0 registers alg 8 flags 0 maxoplen 0 crypto: driver 0 registers alg 15 flags 0 maxoplen 0 crypto: driver 0 registers alg 9 flags 0 maxoplen 0 crypto: driver 0 registers alg 10 flags 0 maxoplen 0 crypto: driver 0 registers alg 13 flags 0 maxoplen 0 crypto: driver 0 registers alg 14 flags 0 maxoplen 0 crypto: driver 0 registers alg 11 flags 0 maxoplen 0 crypto: driver 0 registers alg 17 flags 0 maxoplen 0 Fast IPsec: Initialized Security Association Processing. ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to deny, logging disabled lo0: bpf attached pccard0: CIS version PC Card Standard 5.0 pccard0: CIS info: LG, 11Mbps Wireless LAN PCI Card, Version 01.02, pccard0: Manufacturer code 0x156, product 0x2 pccard0: function 0: network adapter, ccr addr 3e0 mask 1 pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 wi0: at port 0x100-0x13f irq 11 function 0 config 1 on pccard0 wi0: [MPSAFE] wi0: using RF:PRISM2.5 MAC:ISL3873 wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9) wi0: bpf attached wi0: Ethernet address: 00:04:47:50:15:3a wi0: bpf attached wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire ad0: setting PIO4 on PIIX4 chip ad0: setting UDMA33 on PIIX4 chip ad0: 19595MB at ata0-master UDMA33 ad0: 40132503 sectors [42468C/15H/63S] 16 sectors/interrupt 1 depth queue ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad3: setting PIO4 on PIIX4 chip ad3: setting UDMA33 on PIIX4 chip ad3: 19470MB at ata1-slave UDMA33 ad3: 39876480 sectors [42197C/15H/63S] 16 sectors/interrupt 1 depth queue ad3: Intel check1 failed ad3: Adaptec check1 failed ad3: LSI (v3) check1 failed ad3: LSI (v2) check1 failed ad3: FreeBSD check1 failed Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (probe3:sym0:0:3:0): Retrying Command (probe3:sym0:0:3:0): error 22 (probe3:sym0:0:3:0): Unretryable Error pass0 at sym0 bus 0 target 3 lun 0 pass0: Removable CD-ROM SCSI-2 device pass0: 4.237MB/s transfers (4.237MHz, offset 8) ATA PseudoRAID loaded (cd0:sym0:0:3:0): Retrying Command cd0 at sym0 bus 0 target 3 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 4.237MB/s transfers (4.237MHz, offset 8) cd0: cd present [296339 x 2048 byte records] GEOM: new disk ad0 GEOM: new disk ad3 GEOM: new disk cd0 Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init --ELM82590640;-1539-0_--