From owner-freebsd-mobile Sun Nov 2 11:13:02 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id LAA07016 for mobile-outgoing; Sun, 2 Nov 1997 11:13:02 -0800 (PST) (envelope-from owner-freebsd-mobile) Received: from gvr.gvr.org (root@gvr.gvr.org [194.151.74.97]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id LAA07007 for ; Sun, 2 Nov 1997 11:12:58 -0800 (PST) (envelope-from guido@gvr.org) Received: (from guido@localhost) by gvr.gvr.org (8.8.6/8.8.5) id UAA05459; Sun, 2 Nov 1997 20:12:49 +0100 (MET) From: Guido van Rooij Message-Id: <199711021912.UAA05459@gvr.gvr.org> Subject: Re: problems after PAO -> 2.2.5 stable In-Reply-To: <199711021707.KAA02909@rocky.mt.sri.com> from Nate Williams at "Nov 2, 97 10:07:11 am" To: nate@mt.sri.com (Nate Williams) Date: Sun, 2 Nov 1997 20:12:48 +0100 (MET) Cc: nate@mt.sri.com, freebsd-mobile@freebsd.org X-Mailer: ELM [version 2.4ME+ PL32 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-mobile@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Nate Williams wrote: > > > Unfortunately, it looks like it only supports IRQ 3 as well. > > > > > > > It also does 4. > > Not at sio1 according to the dumpcis output. Are your sure? Se 0c21 and 0x23 -Guido Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 61 00 ff Attribute memory device information: Device number 1, type SRAM, WPS = OFF Speed = 250nS, Memory block size = 512b, 1 units Tuple #3, code = 0x15 (Version 1 info), length = 38 000: 04 01 4e 6f 6b 69 61 20 4d 6f 62 69 6c 65 20 50 010: 68 6f 6e 65 73 00 44 54 50 2d 32 20 76 65 72 20 020: 49 49 00 00 00 ff Version = 4.1, Manuf = [Nokia Mobile Phones],card vers = [DTP-2 ver II] Addit. info = [],[] Tuple #4, code = 0x20 (Manufacturer ID), length = 4 000: 24 01 00 01 PCMCIA ID = 0x124, OEM ID = 0x100 Tuple #5, code = 0x21 (Functional ID), length = 2 000: 02 01 Serial port/modem - POST initialize Tuple #6, code = 0x22 (Functional EXT), length = 4 000: 00 02 0f 7c Serial interface extension: 16550 UART, Parity - Space,Mark,Odd,Even, Tuple #7, code = 0x22 (Functional EXT), length = 9 000: 01 1f ff 00 10 00 00 10 00 Modem interface capabilities: Tuple #8, code = 0x22 (Functional EXT), length = 12 000: 02 06 00 26 04 00 01 37 07 00 00 b5 Data modem services available: Tuple #9, code = 0x22 (Functional EXT), length = 8 000: 13 06 00 07 00 ea 00 b5 Tuple #10, code = 0x22 (Functional EXT), length = 8 000: 23 06 00 07 00 ea 00 b5 Tuple #11, code = 0x1a (Configuration map), length = 5 000: 01 24 00 40 07 Reg len = 2, config register addr = 0x4000, last config = 0x24 Registers: XXX----- Tuple #12, code = 0x1b (Configuration entry), length = 18 000: e0 41 99 7f 55 c5 4b d5 19 4d 5d 6d 34 23 30 bc 010: 86 20 Config index = 0x20(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4 x 1V, ext = 0x4b Maximum operating supply voltage: 5 x 1V, ext = 0x19 Continuous supply current: 4.5 x 10mA Max current average over 1 second: 5.5 x 10mA Max current average over 10 ms: 7 x 10mA Power down supply current: 3 x 1mA Card decodes 3 address lines, 8 Bit I/O only IRQ modes: Level IRQ level = 3 Max twin cards = 0 Misc attr: (Read-only) (Power down supported) Tuple #13, code = 0x1b (Configuration entry), length = 8 000: 21 18 a3 60 f8 03 07 04 Config index = 0x21 Card decodes 3 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3f8 block length = 0x8 IRQ modes: IRQ level = 4 Tuple #14, code = 0x1b (Configuration entry), length = 8 000: 22 18 a3 60 f8 02 07 03 Config index = 0x22 Card decodes 3 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2f8 block length = 0x8 IRQ modes: IRQ level = 3 Tuple #15, code = 0x1b (Configuration entry), length = 8 000: 23 18 a3 60 e8 03 07 04 Config index = 0x23 Card decodes 3 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3e8 block length = 0x8 IRQ modes: IRQ level = 4 Tuple #16, code = 0x1b (Configuration entry), length = 8 000: 24 18 a3 60 e8 02 07 03 Config index = 0x24 Card decodes 3 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2e8 block length = 0x8 IRQ modes: IRQ level = 3 Tuple #17, code = 0x14 (No link), length = 0 Tuple #18, code = 0xff (Terminator), length = 0 2 slots found