Date: Wed, 22 May 2019 22:14:04 +0000 From: James Shuriff <james@opentech.cc> To: Balanga Bar <balanga.bar@gmail.com> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: RE: GoFlexHome not booting from disk Message-ID: <BN7PR06MB518733A348B82563D03AA280AA000@BN7PR06MB5187.namprd06.prod.outlook.com> In-Reply-To: <CADocevCT8=tta_vPmHvcvG3JSXjCtBU=ijO=ADbmFD0JSROwYw@mail.gmail.com> References: <CADocevCT8=tta_vPmHvcvG3JSXjCtBU=ijO=ADbmFD0JSROwYw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
What kernconf are you using? I assume you built U-Boot using goflexhome_def=
config.
- James Shuriff
-----Original Message-----
From: owner-freebsd-arm@freebsd.org <owner-freebsd-arm@freebsd.org> On Beha=
lf Of Balanga Bar
Sent: Wednesday, May 22, 2019 6:02 PM
To: freebsd-arm@freebsd.org
Subject: GoFlexHome not booting from disk
I've managed to build FreeBSD 11.1 for armv5 so that I can boot up my GoFle=
x Home from USB but when I copy the same files to a hard disk it will not b=
oot.
Could anyone suggest what I need to check?
I have logs for both instances and can display them if necessary, but the m=
ain difference is the when attempting to boot from USB I get the
following:-
*********************************** USB
************************************************************
Initializing devices...
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
scanning usb for storage devices....
Use USB retry period from the environment: 15 second(s)
1 Storage Device(s) found
Reset IDE: ide_preinit failed
Loading envs from usb 0...
reading /boot/uEnv.txt
146 bytes read in 63 ms (2 KiB/s)
... envs loaded
importing envs ...
reading ubldr
295973 bytes read in 85 ms (3.3 MiB/s)
## Starting application at 0x01000098 ...
Consoles: U-Boot console..
Compatible U-Boot API signature found @0x7b12860
FreeBSD/arm U-Boot loader, Revision 1.2
(Thu Nov 30 14:06:37 GMT 2017 root@Test)
DRAM: 128MB
Number of U-Boot devices: 2
U-Boot env: loaderdev not set, will probe all devices.
Found U-Boot device: disk
Probing all disk devices...
Checking unit=3D0 slice=3D<auto> partition=3D<auto>... good.
Booting from disk0s2a:
*********************************** IDE
************************************************************
Initializing devices...
starting USB...
USB0: USB EHCI 1.00
canning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Reset IDE: Bus 0: .OK Bus 1: not available..
Device 0: Model: HTS541020G9SA00 Firm: MB1OC60J Ser#: MPBAL0X1C5LD1M
Type: Hard Disk
Supports 48-bit addressing
Capacity: 19077.1 MB =3D 18.6 GB (39070080 x 512) Loading envs =
from ide 0...
reading /boot/uEnv.txt
134 bytes read in 46 ms (2 KiB/s)
... envs loaded
importing envs ...
* Bad device ide 1 **
reading ubldr
295973 bytes read in 140 ms (2 MiB/s)
## Starting application at 0x01000098 ...
Consoles: U-Boot console
Compatible U-Boot API signature found @0x7b12860
FreeBSD/arm U-Boot loader, Revision 1.2
(Thu Nov 30 14:06:37 GMT 2017 root@Test)
DRAM: 128MB
Number of U-Boot devices: 1
U-Boot env: loaderdev not set, will probe all devices.
Found U-Boot device: net
Booting from net0:
can't load 'kernel'
***************************************************************************=
***************************
Not sure why it doesn't identify the IDE disk as a U-Boot device....
_______________________________________________
freebsd-arm@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-arm
To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
________________________________
DISCLAIMER: This message and any attachments are intended solely for the u=
se of the recipient and may contain confidential information. If you have r=
eceived this message in error please delete it and promptly notify the send=
er, James Shuriff (james@opentech.cc<mailto:james@opentech.cc>).
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BN7PR06MB518733A348B82563D03AA280AA000>