Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 2 Sep 2001 11:54:37 +0200
From:      Wilko Bulte <wkb@freebie.xs4all.nl>
To:        Andrew Gallatin <gallatin@cs.duke.edu>
Cc:        Jim Pirzyk <Jim.Pirzyk@disney.com>, freebsd-alpha@FreeBSD.ORG
Subject:   Re: XFree86-4 and alpha DS10
Message-ID:  <20010902115437.A28974@freebie.xs4all.nl>
In-Reply-To: <20010901194419.B25898@freebie.xs4all.nl>; from wkb@freebie.xs4all.nl on Sat, Sep 01, 2001 at 07:44:19PM %2B0200
References:  <iss.430a.3b90248d.64c9f.1@mercury.fan.fa.disney.com> <15248.26093.985320.772619@grasshopper.cs.duke.edu> <20010901194419.B25898@freebie.xs4all.nl>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Sep 01, 2001 at 07:44:19PM +0200, Wilko Bulte wrote:
> On Sat, Sep 01, 2001 at 12:37:01AM -0400, Andrew Gallatin wrote:
> 
> > "hmmm" Since this works for me, I'm assuming it must be a problem
> > specific to the tsunami.  I don't suppose either of you has an X log
> > from your attempt to start the X server?  Even starting it remotely
> > and saving the output of your ssh session would be helpful.

...

> > One blind shot in the dark is to change
> > xc/programs/Xserver/hw/xfree86/os-support/bsd/bsdResource.c's
> > xf86PciBusAccWindowsFromOS(void) RANGE to allow everything, like
> 
> I'm gonna try this next..

Better, in the sense that the machine does not lockup:

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(0:14:0) Matrox MGA 2164W rev 0, Mem @ 0x40000000/24,
0x018a0000/14, 0x01000000/23, BIOS @ 0x01880000/16
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 1.0.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
        mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(--) Assigning device section with no busID to primary device
(--) Chipset mga2164w found
(WW) ****INVALID MEM ALLOCATION**** b: 0x18a0000 e: 0x18a3fff correcting
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.1.0, module version = 0.1.0
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(II) MGA(0): Matrox HAL module not found - using builtin mode setup instead
(--) MGA(0): Chipset: "mga2164w"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0x40000000
(EE) MGA(0): No valid MMIO address in PCI config space
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.

But also not correct.

W/
-- 
|   / o / /  _   	Arnhem, The Netherlands    	email: wilko@FreeBSD.org
|/|/ / / /( (_) Bulte	

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010902115437.A28974>