From owner-freebsd-questions Wed Nov 20 07:49:04 1996 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id HAA12405 for questions-outgoing; Wed, 20 Nov 1996 07:49:04 -0800 (PST) Received: from dyson.iquest.net ([198.70.144.127]) by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id HAA12390 for ; Wed, 20 Nov 1996 07:48:48 -0800 (PST) Received: (from root@localhost) by dyson.iquest.net (8.8.2/8.6.9) id KAA00185; Wed, 20 Nov 1996 10:48:33 -0500 (EST) From: "John S. Dyson" Message-Id: <199611201548.KAA00185@dyson.iquest.net> Subject: Re: ep0 and ed0 network drivers To: pirzyk@faf.disney.com (Jim Pirzyk) Date: Wed, 20 Nov 1996 10:48:32 -0500 (EST) Cc: freebsd-questions@FreeBSD.org In-Reply-To: <199611201449.JAA16588@flnews.faf.disney.com> from "Jim Pirzyk" at Nov 20, 96 09:49:09 am Reply-To: dyson@FreeBSD.org X-Mailer: ELM [version 2.4 PL24 ME8] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-questions@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk > > > I am trying to get a 3c509 and a Ne2000 clone card to talk to each other > over thin net ethernet (BNC). I have tried all combinations of link[012] > that I could think of. I have even put a scope on the thin ethernet line > to see if there was data on the line (from both hosts). Both the cards > are seen by the system on boot up and I do not get any ed0: Data Timeout > messages so I think they are configured properly. > I know that this might be "obvious", but have you put terminators on the 10Base2 line? John