Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 27 Nov 2019 23:31:49 -0000
From:      Clay Daniels <clay.daniels.jr@gmail.com>
To:        Polytropon <freebsd@edvax.de>
Cc:        vm finance <vm.finance2@gmail.com>, Theron <theron.tarigo@gmail.com>,  "Kevin P. Neal" <kpn@neutralgood.org>,  "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org>, freebsd-pkg@freebsd.org
Subject:   Re: FreeBSD-12.1 on laptop
Message-ID:  <CAGLDxTWNnfsoQo8VkiwQ6cdBxjjECgPS6qc71tHD9zDDnLqVNw@mail.gmail.com>
In-Reply-To: <20191127204649.203c695a.freebsd@edvax.de>
References:  <CAKy-8=hUCNiAufHHgpLJTnbS_==aHT7UyspgjLyro-yEcxJ2_w@mail.gmail.com> <18414268-96b1-6112-2c91-345aea9e7f24@gmail.com> <CAKy-8=hb0rTOSRJ5bbT=GeQoKaZDoVNVUm%2B1o_pUYR6QGSg20A@mail.gmail.com> <20191127160215.GA69810@neutralgood.org> <20191127160441.GB69810@neutralgood.org> <CAKy-8=j8z9nAnko1Dcg7m-g3NC1e2raja2mupYedhk-LdxRNdA@mail.gmail.com> <0e484b77-afac-670d-5c34-381862388283@gmail.com> <CAKy-8=jbMrAocdoYCjCZM-znxXM0rXyYQAyeZauUgL1pOVF80g@mail.gmail.com> <20191127204649.203c695a.freebsd@edvax.de>

next in thread | previous in thread | raw e-mail | index | archive | help
My experience is from running 13.0 for several months, a new install most
every week. I wonder if 12.1 didn't inherit our setup. In the exit message
after you install drm-kmod it should tell you what to put in /etc/rc.conf
and give three choices depending on your processor. For an Intel machine
the correct entry (at least for the 13.0 folks) is:

*kld_list="i915kms"*

No path necessary. Give it a try.

Clay

On Wed, Nov 27, 2019 at 1:52 PM Polytropon <freebsd@edvax.de> wrote:

> On Thu, 28 Nov 2019 00:52:38 +0530, vm finance wrote:
> > Hi Theron,
> >
> > Ok - it tried this:
> > make -C /usr/ports/graphics/drm-kmod deinstall clean install
> > Reboot
> > make -C /usr/ports/graphics/drm-kmod deinstall
> > cd /usr/ports/graphics/drm-kmod
> > make install FORCE_PKG_REGISTER=1 /* make install failed suggested to set
> > this flag */
> > [drm-kmod-g20190710 gets installed]
> >
> > this seemed to work but startx fails again (same framebuffer error).
> >
> > I also tried to "kldload drm.ko" - still no luck!
>
> Did you also install the X driver for your graphics card?
> If you have a Thinkpad, I guess it contains Intel graphics.
> What does /var/log/Xorg.0.log say about that?
>
>
>
> > BTW, if I go back to 12.0 RELEASE, would that solve the problem?
>
> It would at least solve the ABI incompatibility problem.
> Currently I have a system running v12.0-p7 with the following
> configuration:
>
> In /boot/loader.conf:
>
>         i915kms_load="YES"
>
> I have installed the xf86-video-intel package for X, and X
> starts without any configuration file. I also don't have
> anything DRM-related in any of the system configuration files.
> But X works as expected.
>
>
>
> > Ultimately, I need to rebuild with latest sources anyways to experiment
> > something w/ TCP stack,
> > so hopefully going back to 12.0 should fix - thoughts, please?
>
> If you get the latest OS sources and obtain a current ports tree,
> things should be in sync again. But don't use pkg to update your
> system in such a case without carefully locking the DRM kernel
> module port as mentioned before.
>
>
>
> > Any other ideas? Thanks a lot!
>
> Check if all components needed for X are actually installed.
>
>
> --
> Polytropon
> Magdeburg, Germany
> Happy FreeBSD user since 4.0
> Andra moi ennepe, Mousa, ...
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "
> freebsd-questions-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGLDxTWNnfsoQo8VkiwQ6cdBxjjECgPS6qc71tHD9zDDnLqVNw>