From owner-freebsd-questions Fri Oct 6 02:09:19 1995 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.6.12/8.6.6) id CAA18396 for questions-outgoing; Fri, 6 Oct 1995 02:09:19 -0700 Received: from swissbank.swissbank.com (swissbank.swissbank.com [146.180.1.2]) by freefall.freebsd.org (8.6.12/8.6.6) with SMTP id CAA18389 for ; Fri, 6 Oct 1995 02:09:14 -0700 Received: by swissbank.swissbank.com with UUCP (4.1/BK-1.9) id AA20454; Fri, 6 Oct 95 04:11:35 CDT Received: from il.us.swissbank.com by gatekeeper.swissbank.com with SMTP (8.6.12/BK-1.12) id EAA00918; Fri, 6 Oct 1995 04:06:53 -0500 Received: from ln1d278nwk by il.us.swissbank.com (4.1/SMI-4.1) id AA13838; Fri, 6 Oct 95 04:08:18 CDT Received: by ln1d278nwk (NX5.67d/NX3.0S) id AA14238; Fri, 6 Oct 95 10:08:14 +0100 Message-Id: <9510060908.AA14238@ln1d278nwk> Received: by NeXT.Mailer (1.112.1.RR) Content-Type: text/plain Mime-Version: 1.0 (NeXT Mail 3.3 v112.1) From: Armando Ferreira Date: Fri, 6 Oct 95 10:08:07 +0100 To: questions@FreeBSD.ORG Subject: Help ! Problem with Ethernet card Tel: 0171 7113549 Reply-To: armando_ferreira@il.us.swissbank.com Sender: owner-questions@FreeBSD.ORG Precedence: bulk Hi, I am having trouble installing a Western Digital card on my PC. The configuration I used in to configure the kernel was device ed0 at isa? port 0x300 net irq 5 iomem 0xCA000 vector edintr I changed the jumpers on the card to match the above irq and memory address configuration. and I get the following problem at boot time: >>ed0: failed to clear shared memory at ca000 - check configuration<< Can you please tell me if there is something else to setup or if I have done something wrong ? Thanks, Armando. Below is the complete output from dmesg: FreeBSD 2.0.5-RELEASE #0: Thu Oct 5 17:48:18 BST 1995 root@tuna.dolcom.co.uk:/usr/src/sys/compile/MYKERNEL CPU: 99-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x1bf real memory = 33161216 (8096 pages) avail memory = 30830592 (7527 pages) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0: failed to clear shared memory at ca000 - check configuration ed0 not found at 0x300 psm0 at 0x60-0x63 irq 12 on motherboard sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 not found at 0xffffffff lpt2 not found at 0xffffffff fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in scd0 not found at 0x230 npx0 on motherboard npx0: INT 16 interface Probing for devices on the pci0 bus: configuration mode 1 allows 32 devices. pci0:0: INTEL CORPORATION, device=0x122d, class=bridge [not supported] pci0:7: INTEL CORPORATION, device=0x122e, class=bridge [not supported] ahc0 rev 3 int a irq 11 on pci0:17 ahc0: reading board settings ahc0: 294x Single Channel, SCSI Id=7, aic7870, 16 SCBs ahc0: Downloading Sequencer Program...Done ahc0: Probing channel A ahc0 waiting for scsi devices to settle ahc0: target 0 synchronous at 10.0MB/s, offset = 0xf (ahc0:0:0): "Quantum XP32150 576D" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 2050MB (4199760 512 byte sectors) ahc0: target 2 synchronous at 4.4MB/s, offset = 0x8 (ahc0:2:0): "WangDAT Model 3200 03.0" type 1 removable SCSI 2 st0(ahc0:2:0): Sequential-Access density code 0x13, drive empty ahc0: target 3 synchronous at 5.0MB/s, offset = 0xf (ahc0:3:0): "MATSHITA CD-ROM CR-504 ST23" type 5 removable SCSI 2 cd0(ahc0:3:0): CD-ROM cd0(ahc0:3:0): NOT READY asc:3a,0 Medium not present can't get the size vga0 rev 0 int a irq 9 on pci0:19 pci0: uses 33558528 bytes of memory from 40000000 upto fffdffff. pci0: uses 256 bytes of I/O space from f800 upto f8ff. changing root device to sd0a WARNING: / was not properly dismounted.