Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 12 Aug 2002 12:14:25 -0700 (PDT)
From:      Matthew Jacob <mjacob@feral.com>
To:        Marcin Gryszkalis <mgryszkalis@cerint.pl>
Cc:        freebsd-alpha <freebsd-alpha@FreeBSD.ORG>, freebsd-scsi@FreeBSD.ORG
Subject:   Re: ISP Nvram [ was 'da driver problem?' ]
Message-ID:  <Pine.BSF.4.21.0208121213580.73304-100000@beppo>
In-Reply-To: <3D58071B.6070901@cerint.pl>

next in thread | previous in thread | raw e-mail | index | archive | help

Hmm. If it's claiming invalid NVRAM header, than reasonable defaults should be
being picked.

On Mon, 12 Aug 2002, Marcin Gryszkalis wrote:

> Matthew Jacob wrote:
> > Interrupt the boot process and at the loader prompt do
> > 	set isp_debug=0x1f
> > and boot (or fail to boot) and send us the output.
> > Or add
> > 	set isp_no_nvram=0x1
> > to keep NVRAM from being read.
> 
> I'll try... (I'll be able to do it on wednesday).
> 
> > You haven't said whether you're now loading isp firmware or not.
> I loaded ispfw.ko (w/o any difference).
> 
> Preloaded elf kernel "kernel" at 0xfffffc0000600000.
> Preloaded elf module "ispfw.ko" at 0xfffffc00006000c0.
> ...
> isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 
> 0x82018000-0x82018fff irq 12 at device 9.0 on pci0
> isp0: interrupting at CIA irq 12
> isp0: invalid NVRAM header
> da0 at isp0 bus 0 target 1 lun 0
> da0: <DEC RZ29B    (C) DEC 0016> Fixed Direct Access SCSI-2 device
> da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled
> da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
> da1 at isp0 bus 0 target 2 lun 0
> da1: <DEC RZ29B    (C) DEC 0016> Fixed Direct Access SCSI-2 device
> da1: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled
> da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C)
> 
> ...
> 
> 
> 
> -- 
> Marcin Gryszkalis <mg@cerint.pl>
> or <dagoon@math.uni.lodz.pl>
> 
> 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0208121213580.73304-100000>