Date: Sat, 7 Mar 2009 21:33:35 +0300 From: =?utf-8?b?0JTQvNC40YLRgNC40Lkg0JrQvtC70L7RgdC+0LI=?= <ivakras1@gmail.com> To: freebsd-mobile@freebsd.org Subject: Re: associated to AP (WEP mode) && no IP addr via DHCP Message-ID: <200903072133.35488.ivakras1@gmail.com> In-Reply-To: <20090307133805.GA11596@rebelion.Sisis.de> References: <20090305120022.GA8012@rebelion.Sisis.de> <49B1BB71.6060000@freebsd.org> <20090307133805.GA11596@rebelion.Sisis.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On =D0=A1=D1=83=D0=B1=D0=B1=D0=BE=D1=82=D0=B0 07 =D0=BC=D0=B0=D1=80=D1=82=
=D0=B0 2009 16:38:05 Matthias Apitz wrote:
> El d=C3=ADa Friday, March 06, 2009 a las 04:10:25PM -0800, Sam Leffler es=
cribi=C3=B3:
>=20
> > What does athstats show for crypto errors? If the WEP-encrypted packet=
=20
> > is dropped by the h/w then you will see the counter bump.
> >=20
> > Based on the above you are not running HEAD; if you can try that I can=
=20
> > help more.
>=20
> Sam, when I've built the HEAD kernel last year in August for my EeePC,
> my hints file says about:
>=20
> ...
> Sam's patch for HAL:
>=20
> # cd /usr/src/sys/contrib/dev
> # mv ath ath.RELENG_7
> # tar xzf ath_hal-20080528.tgz
> # mv ath_hal-20080528 ath
>=20
> Is this patch still required for RELENG_7, or already in the sourcen whe
> I now do 'cvs update -rRELENG_7 src/sys'? It seems so from the age of
> the files below /usr/src/sys/contrib/dev/ath after cvs update...
>=20
> Thx
>=20
> matthias
>=20
Just use mad-wifi hal to replace a system one. It worked fine to me.
After replacing /usr/src/sys/contrib/dev/ath/ with content of madwifi-hal-0=
=2E10.5.6-current.tar.gz/hal (and building a new kernel) my ath0
{
ath_hal: 0.10.5.6 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, =
RF5413, RF2133, RF2425, RF2417)
ath0: <Atheros 5424/2424> mem 0xf4000000-0xf400ffff irq 16 at device 0.0 on=
pci2
ath0@pci0:2:0:0: class=3D0x020000 card=3D0x04281468 chip=3D0x001c168=
c rev=3D0x01 hdr=3D0x00 =
=20
vendor =3D 'Atheros Communications Inc.' =
=20
device =3D 'AR5006 family 802.11abg Wireless NIC' =
=20
class =3D network =
=20
subclass =3D ethernet
}
working very fast - burst, dturbo, Atheros Fast Frames modes, and other at=
heros modes supported wery well! But hardware led not blinking (under u-kno=
w-what OS it is blinking when tx or rx is active).
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200903072133.35488.ivakras1>