From owner-freebsd-hackers Thu Aug 22 20:40:33 1996 Return-Path: owner-hackers Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id UAA24941 for hackers-outgoing; Thu, 22 Aug 1996 20:40:33 -0700 (PDT) Received: from rk.ios.com (rk.ios.com [198.4.75.55]) by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id UAA24935 for ; Thu, 22 Aug 1996 20:40:28 -0700 (PDT) Received: (from rashid@localhost) by rk.ios.com (8.7.5/8.7.3) id XAA20759; Thu, 22 Aug 1996 23:37:26 -0400 (EDT) From: Rashid Karimov Message-Id: <199608230337.XAA20759@rk.ios.com> Subject: Re: SMC EtherPower 10/100 - 9332 To: greg@uswest.net (Greg Rowe) Date: Thu, 22 Aug 1996 23:37:26 -0400 (EDT) Cc: freebsd-hackers@FreeBSD.org In-Reply-To: <9608221608.ZM19371@nevis.oss.uswest.net> from "Greg Rowe" at Aug 22, 96 04:08:17 pm Content-Type: text Sender: owner-hackers@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk I beleive you should be able to force them into specific mode via "link" flags to ifconfig. Try RTFM > > Greetings, > > Has anyone seen any problems with these things detecting the Hub speed > incorrectly on a reboot ? I've had a couple instances on different systems, and > different hubs, where a reboot will cause the card to come up as 100baseT on a > 10baseT hub(2.1 & 2.1.5). A power on and off will then correct the problem. > Again, I've only seen the problem only a couple times, and I have a fair number > of these cards. Is there any way to force the card via the OS to go to 10baseT > ? > > Thanks > > > > -- > Greg Rowe | > U S West - Interact Services | INTERNET greg@uswest.net > 111 Washington Ave. South | Fax: (612) 672-8537 > Minneapolis, MN USA 55401 | Voice: (612) 672-8535 > > Never trust an operating system you don't have source for.... > >