Date: Sun, 18 Oct 2015 03:07:58 +0200 (CEST) From: - - <andreas@braml.org> To: freebsd-x11@freebsd.org Subject: Testing the new i915 driver (855GM) Message-ID: <1913812716.186172.1445130478636.JavaMail.open-xchange@oxbaltgw04.schlund.de>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hi! Today I tried my luck with the new i915 driver following the instructions on https://wiki.freebsd.org/Graphics/Update%20i915%20GPU%20driver%20to%20Linux%203.8 I updated the whole system from 10.1-RELEASE to -CURRENT about 3 weeks ago, including a full port rebuild followed by make delete-old[-libs]. So this should be clean enough for testing. The only basic thing I had to change was putting hint.agp.N.disable=1 in /boot/loader.conf (with N either 0 or 1). Otherwise I get a panic when agp loads. This used to work in 10.1-RELEASE. Since this machine is quite dated, I haven't found the strength to do a bisect to find the culprit. I decided to better wait until after I passed the differential equations test next month before I embark on that journey. :) Now for my test with the updated i915kms: - kldload'ing i915kms works (well, at least it doesn't panic as it does on CURRENT head) - trying to startx with the xorg.conf I used on 10.1 RELEASE leads to a panic Find attached: * dmesg output * xorg.conf * core.txt of the panic If you need additional logs or want me to try something else, just ask. Thanks for your continuous work on this, Jean-Sébastien! Bye, Andreas [-- Attachment #2 --] marnie.dom.braml.org dumped core - see /var/crash/vmcore.4 Sun Oct 18 00:44:35 CEST 2015 FreeBSD marnie.dom.braml.org 11.0-CURRENT FreeBSD 11.0-CURRENT #0 3820047(drm-i915-update-38): Sat Oct 17 20:09:30 CEST 2015 root@marnie.dom.braml.org:/usr/obj/usr/home/myuser/freebsd-base-graphics/sys/GENERIC i386 panic: _sx_xlock_hard: recursed on non-recursive sx kmslk @ /usr/home/myuser/freebsd-base-graphics/sys/modules/drm2/i915kms/../../../dev/drm2/i915/intel_overlay.c:1318 GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-marcel-freebsd"... Unread portion of the kernel message buffer: [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc01064ab, nr=0xab, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc02c6468, nr=0x68, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:intel_crtc_set_config] [CRTC:3] [NOFB] [drm:KMS:pid853:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:KMS:pid853:intel_crtc_set_config] [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [drm:KMS:pid853:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] panic: _sx_xlock_hard: recursed on non-recursive sx kmslk @ /usr/home/myuser/freebsd-base-graphics/sys/modules/drm2/i915kms/../../../dev/drm2/i915/intel_overlay.c:1318 cpuid = 0 KDB: stack backtrace: db_trace_self_wrapper(c1545960,662f6964,62656572,622d6473,2d657361,...) at db_trace_self_wrapper+0x2a/frame 0xda2d48e0 kdb_backtrace(c171800b,0,c1541882,da2d49ac,0,...) at kdb_backtrace+0x2d/frame 0xda2d4948 vpanic(c1541882,da2d49ac,c1541882,da2d49ac,da2d49ac,...) at vpanic+0x117/frame 0xda2d497c kassert_panic(c1541882,c5cdffb7,c5c962ea,526,53e019c5,...) at kassert_panic+0xe9/frame 0xda2d49a0 _sx_xlock_hard(c58e6a10,c5bd4680,0,c5c962ea,526,...) at _sx_xlock_hard+0x76f/frame 0xda2d4a40 _sx_xlock(c58e6a10,0,c5c962ea,526,c58e6800,...) at _sx_xlock+0xe1/frame 0xda2d4a70 intel_overlay_attrs(c58e6800,da2d4b80,c5228200,355,c02c6468,...) at intel_overlay_attrs+0x1c7/frame 0xda2d4aa4 drm_ioctl(c5bf5500,c02c6468,da2d4b80,3,c5bd4680,...) at drm_ioctl+0x281/frame 0xda2d4ae4 devfs_ioctl_f(c597f460,c02c6468,da2d4b80,c5bf6000,c5bd4680,...) at devfs_ioctl_f+0x121/frame 0xda2d4b1c kern_ioctl(c5bd4680,7,c02c6468,da2d4b80,da2d4bc4,...) at kern_ioctl+0x2dc/frame 0xda2d4b58 sys_ioctl(c5bd4680,da2d4ca8,c1538a7e,4,c1a497d4,...) at sys_ioctl+0x11b/frame 0xda2d4c18 syscall(da2d4ce8) at syscall+0x3b5/frame 0xda2d4cdc Xint0x80_syscall() at Xint0x80_syscall+0x2c/frame 0xda2d4cdc --- syscall (54, FreeBSD ELF32, sys_ioctl), eip = 0x2865283f, esp = 0xbfbfea34, ebp = 0xbfbfea50 --- Uptime: 8m35s Physical memory: 466 MB Dumping 80 MB: 65 49 33 17 1 Reading symbols from /boot/kernel.i915/fdescfs.ko...Reading symbols from /usr/lib/debug//boot/kernel.i915/fdescfs.ko.debug...done. done. Loaded symbols for /boot/kernel.i915/fdescfs.ko Reading symbols from /boot/kernel.i915/netgraph.ko...Reading symbols from /usr/lib/debug//boot/kernel.i915/netgraph.ko.debug...done. done. Loaded symbols for /boot/kernel.i915/netgraph.ko Reading symbols from /boot/kernel.i915/ng_ether.ko...Reading symbols from /usr/lib/debug//boot/kernel.i915/ng_ether.ko.debug...done. done. Loaded symbols for /boot/kernel.i915/ng_ether.ko Reading symbols from /boot/kernel.i915/ng_pppoe.ko...Reading symbols from /usr/lib/debug//boot/kernel.i915/ng_pppoe.ko.debug...done. done. Loaded symbols for /boot/kernel.i915/ng_pppoe.ko Reading symbols from /boot/kernel.i915/ng_socket.ko...Reading symbols from /usr/lib/debug//boot/kernel.i915/ng_socket.ko.debug...done. done. Loaded symbols for /boot/kernel.i915/ng_socket.ko Reading symbols from /boot/kernel.i915/cpuctl.ko...Reading symbols from /usr/lib/debug//boot/kernel.i915/cpuctl.ko.debug...done. done. Loaded symbols for /boot/kernel.i915/cpuctl.ko Reading symbols from /boot/kernel.i915/i915kms.ko...Reading symbols from /usr/lib/debug//boot/kernel.i915/i915kms.ko.debug...done. done. Loaded symbols for /boot/kernel.i915/i915kms.ko Reading symbols from /boot/kernel.i915/drm2.ko...Reading symbols from /usr/lib/debug//boot/kernel.i915/drm2.ko.debug...done. done. Loaded symbols for /boot/kernel.i915/drm2.ko Reading symbols from /boot/kernel.i915/iicbus.ko...Reading symbols from /usr/lib/debug//boot/kernel.i915/iicbus.ko.debug...done. done. Loaded symbols for /boot/kernel.i915/iicbus.ko Reading symbols from /boot/kernel.i915/iic.ko...Reading symbols from /usr/lib/debug//boot/kernel.i915/iic.ko.debug...done. done. Loaded symbols for /boot/kernel.i915/iic.ko Reading symbols from /boot/kernel.i915/iicbb.ko...Reading symbols from /usr/lib/debug//boot/kernel.i915/iicbb.ko.debug...done. done. Loaded symbols for /boot/kernel.i915/iicbb.ko #0 doadump (textdump=1) at pcpu.h:206 206 pcpu.h: No such file or directory. in pcpu.h (kgdb) #0 doadump (textdump=1) at pcpu.h:206 #1 0xc0c12413 in kern_reboot (howto=260) at /usr/home/myuser/freebsd-base-graphics/sys/kern/kern_shutdown.c:364 #2 0xc0c12965 in vpanic (fmt=<value optimized out>, ap=<value optimized out>) at /usr/home/myuser/freebsd-base-graphics/sys/kern/kern_shutdown.c:757 #3 0xc0c12809 in kassert_panic (fmt=<value optimized out>) at /usr/home/myuser/freebsd-base-graphics/sys/kern/kern_shutdown.c:647 #4 0xc0c1b8ef in _sx_xlock_hard (sx=0xc58e6a10, tid=<value optimized out>, opts=<value optimized out>, file=0x0, line=0) at /usr/home/myuser/freebsd-base-graphics/sys/kern/kern_sx.c:529 #5 0xc0c1aa11 in _sx_xlock (sx=0xc58e6a10, opts=<value optimized out>, file=0xc5c962ea "/usr/home/myuser/freebsd-base-graphics/sys/modules/drm2/i915kms/../../../dev/drm2/i915/intel_overlay.c", line=1318) at sx.h:154 #6 0xc5c6d137 in intel_overlay_attrs (dev=<value optimized out>, data=<value optimized out>, file_priv=0xc5228200) at /usr/home/myuser/freebsd-base-graphics/sys/modules/drm2/i915kms/../../../dev/drm2/i915/intel_overlay.c:1318 #7 0xc5cb97a1 in drm_ioctl (kdev=0xc5bf5500, cmd=<value optimized out>, data=<value optimized out>, flags=3, p=<value optimized out>) at /usr/home/myuser/freebsd-base-graphics/sys/modules/drm2/drm2/../../../dev/drm2/drm_drv.c:463 #8 0xc0ae64f1 in devfs_ioctl_f (fp=<value optimized out>, com=3224134760, data=<value optimized out>, cred=<value optimized out>, td=0xc5bd4680) at /usr/home/myuser/freebsd-base-graphics/sys/fs/devfs/devfs_vnops.c:807 #9 0xc0c738ac in kern_ioctl (td=0x2, fd=<value optimized out>, com=9, data=<value optimized out>) at file.h:324 #10 0xc0c7355b in sys_ioctl (td=<value optimized out>, uap=<value optimized out>) at /usr/home/myuser/freebsd-base-graphics/sys/kern/sys_generic.c:723 #11 0xc1162d25 in syscall (frame=<value optimized out>) at subr_syscall.c:140 #12 0xc114d8dc in Xint0x80_syscall () at /usr/home/myuser/freebsd-base-graphics/sys/i386/i386/exception.s:278 #13 0x00000033 in ?? () Previous frame inner to this frame (corrupt stack?) Current language: auto; currently minimal (kgdb) ------------------------------------------------------------------------ ps -axlww UID PID PPID CPU PRI NI VSZ RSS MWCHAN STAT TT TIME COMMAND 0 0 0 0 -98 0 0 476432 swapin ?Ls - 0:00.00 [kernel] 0 1 0 0 91 0 5184 2261296 wait ?Ls - 0:00.01 [init] 0 2 0 0 -86 0 0 476432 - ?L - 0:00.01 [rand_harvestq] 0 3 0 0 -90 0 0 476432 crypto_w ?L - 0:00.00 [crypto] 0 4 0 0 -90 0 0 476432 crypto_r ?L - 0:00.00 [crypto returns] 0 5 0 0 -88 0 0 476432 - ?L - 0:00.03 [cam] 0 6 0 0 -74 0 0 476432 - ?L - 0:00.00 [cbb0 event thread] 0 7 0 0 -74 0 0 476432 - ?L - 0:00.00 [cbb1 event thread] 0 8 0 0 -64 0 0 476432 waiting_ ?L - 0:00.00 [sctp_iterator] 0 9 0 0 -64 0 0 476432 psleep ?L - 0:00.00 [pagedaemon] 0 10 0 0 91 0 0 476432 audit_wo ?L - 0:00.00 [audit] 0 11 0 0 -86 0 0 476432 - ?L - 0:17.42 [idle] 0 12 0 0 -91 0 0 476432 - ?L - 0:00.33 [intr] 0 13 0 0 -91 0 0 476432 - ?L - 0:00.02 [geom] 0 14 0 0 -79 0 0 476432 - ?L - 0:00.00 [usb] 0 15 0 0 -66 0 0 476432 tzpoll ?L - 0:00.04 [acpi_thermal] 0 16 0 0 -65 0 0 476432 cooling ?L - 0:00.00 [acpi_cooling0] 0 17 0 0 -64 0 0 476432 psleep ?L - 0:00.00 [vmdaemon] 0 18 0 0 -63 0 0 476432 pgzero ?L - 0:00.00 [pagezero] 0 19 0 0 -63 0 0 476432 psleep ?L - 0:00.00 [bufdaemon] 0 20 0 0 -63 0 0 476432 vlruwt ?L - 0:00.00 [vnlru] 0 21 0 0 -63 0 0 476432 syncer ?L - 0:00.00 [syncer] 0 412 1 0 -60 0 7260 2819568 select ?s - 0:00.00 [devd] 0 436 1 0 -59 0 8368 1958816 select ?s - 0:00.56 [ppp] 0 444 0 0 -60 0 0 476432 sleep ?L - 0:00.00 [ng_queue] 0 585 1 0 -60 0 6000 1939088 select ?s - 0:00.02 [syslogd] 0 611 1 0 -61 0 6112 1960032 select ?s - 0:00.00 [casperd] 0 612 1 0 -59 0 6112 1950912 select ?s - 0:00.00 [casperd] 0 667 1 0 -60 0 8968 1958512 select ?s - 0:00.06 [ntpd] 0 670 1 0 -59 0 5964 1186032 select ?s - 0:00.00 [powerd] 0 696 1 0 -59 0 6152 1936656 select ?s - 0:00.00 [moused] 556 714 1 0 -58 0 6508 1936048 select Rs - 0:00.00 [dbus-daemon] 0 722 1 0 -58 0 12348 0 nanslp ?s - 0:00.02 [perl] 0 755 1 0 -62 0 10912 2832640 select ?s - 0:00.00 [sshd] 0 758 1 0 -62 0 8792 2250080 select ?s - 0:00.01 [sendmail] 25 761 1 0 -61 0 8792 2228224 pause ?s - 0:00.00 [sendmail] 0 765 1 0 -60 0 6032 1190288 nanslp ?s - 0:00.01 [cron] 0 813 1 0 -58 0 5984 1954560 ttyin ?s+ - 0:00.00 [getty] 0 814 1 0 -57 0 5984 3586000 ttyin ?s+ - 0:00.00 [getty] 0 815 1 0 -57 0 5984 3578096 ttyin ?s+ - 0:00.00 [getty] 0 816 1 0 -57 0 5984 2836256 ttyin ?s+ - 0:00.00 [getty] 0 817 1 0 -56 0 5984 3586912 ttyin ?s+ - 0:00.00 [getty] 0 818 1 0 -56 0 5984 2269200 ttyin ?s+ - 0:00.00 [getty] 0 819 1 0 -55 0 5984 3567792 ttyin ?s+ - 0:00.00 [getty] 0 835 1 0 -62 0 6508 0 wait ?s - 0:00.00 [login] 1000 836 835 0 -56 0 6856 2250992 pause ? - 0:00.01 [tcsh] 1000 839 836 0 -57 0 6484 3579920 wait ?+ - 0:00.00 [sh] 1000 852 839 0 -56 0 5184 1951824 pause ?+ - 0:00.00 [xinit] 0 853 852 0 -55 0 15580 3565968 - ? - 0:00.00 [Xorg] ------------------------------------------------------------------------ vmstat -s 71862 cpu context switches 1029917 device interrupts 16086 software interrupts 74381 traps 338869 system calls 22 kernel threads created 579 fork() calls 252 vfork() calls 0 rfork() calls 0 swap pager pageins 0 swap pager pages paged in 0 swap pager pageouts 0 swap pager pages paged out 835 vnode pager pageins 5219 vnode pager pages paged in 0 vnode pager pageouts 0 vnode pager pages paged out 0 page daemon wakeups 0 pages examined by the page daemon 0 pages reactivated 20503 copy-on-write faults 76 copy-on-write optimized faults 41238 zero fill pages zeroed 1254 zero fill pages prezeroed 0 intransit blocking page faults 70776 total VM faults taken 748 page faults requiring I/O 0 pages affected by kernel thread creation 20538 pages affected by fork() 8955 pages affected by vfork() 0 pages affected by rfork() 0 pages cached 81815 pages freed 0 pages freed by daemon 0 pages freed by exiting processes 6014 pages active 4052 pages inactive 0 pages in VM cache 13256 pages wired down 93859 pages free 4096 bytes per page 56563 total name lookups cache hits (85% pos + 8% neg) system 0% per-directory deletions 0%, falsehits 0%, toolong 0% ------------------------------------------------------------------------ vmstat -m Type InUse MemUse HighUse Requests Size(s) CAM dev queue 3 1K - 3 64 entropy 0 0K - 14 4096 agp 1 1K - 1 16 scsi_cd 0 0K - 5 16 ac97 2 1K - 2 16,512 feeder 12 1K - 14 16,64 mixer 1 4K - 1 4096 ata_pci 1 1K - 1 32 USB 24 10K - 24 16,64,256,2048 USBdev 20 2K - 20 32,128,256 ddb_capture 1 64K - 1 65536 acpiintr 1 1K - 1 32 vtbuf 24 3048K - 70 2048 vt 11 3K - 11 256 acpica 1854 95K - 54509 16,32,64,128,512,1024 acpitask 1 4K - 1 4096 DEVFS3 123 16K - 151 128,256 DEVFS1 103 26K - 117 256 DEVFS_RULE 57 14K - 57 32,256 DEVFS 18 1K - 19 16,64 DEVFSP 1 1K - 4 32 NFSD V4client 1 1K - 1 128 NFSD lckfile 1 1K - 1 128 NFSD session 1 1K - 1 512 pfs_nodes 21 3K - 21 128 GEOM 58 8K - 762 16,32,64,128,256,512,1024,2048,8192,16384 raid_data 0 0K - 114 16,128 isadev 9 1K - 9 64 acpisem 34 4K - 34 64,128 acpidev 35 2K - 35 32 CAM SIM 3 1K - 3 128 CAM XPT 22 2K - 97 16,32,128,256,512,1024,2048,65536 cdev 6 1K - 6 128 filedesc 2 5K - 2 16,4096 sigio 1 1K - 1 32 kdtrace 149 29K - 954 64,256 kenv 102 8K - 160 16,32,64,128,4096 kqueue 2 2K - 2 128,1024 proc-args 27 2K - 561 16,32,64,128,256 hhook 9 2K - 9 128 ithread 56 5K - 56 16,64,128 KTRACE 100 13K - 100 128 CAM DEV 5 10K - 9 2048 linker 241 1291K - 385 16,32,64,256,1024,2048,4096,8192,16384,32768,65536 CAM CCB 0 0K - 2700 2048 lockf 26 2K - 62 32,64 loginclass 4 1K - 4 64 cache 1 1K - 1 16 devbuf 1973 791K - 2006 16,32,64,128,256,512,1024,2048,4096,8192,16384,65536 temp 29 154K - 1513 16,32,64,128,256,512,1024,2048,16384,65536 ip6opt 3 1K - 3 256 ip6ndp 5 1K - 6 64,128 CAM path 7 1K - 46 16 CAM periph 6 1K - 22 16,32,64,128 module 549 35K - 550 64,128 mtx_pool 2 8K - 2 4096 pmchooks 1 1K - 1 64 pgrp 26 2K - 42 64 session 23 3K - 27 128 proc 2 4K - 2 2048 subproc 102 210K - 907 256,4096 cred 32 8K - 476 256 plimit 16 4K - 234 256 uidinfo 5 1K - 9 64,512 sysctl 0 0K - 246 16,32,64 sysctloid 3855 121K - 3968 16,32,64,128 sysctltmp 0 0K - 91 16,32,64,256,1024 tidhash 1 4K - 1 4096 callout 2 924K - 2 umtx 208 20K - 208 64,128 p1003.1b 1 1K - 1 16 SWAP 2 209K - 2 64 bus 1371 62K - 5751 16,32,64,128,256,1024 bus-sc 104 203K - 3344 16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536 devstat 6 13K - 6 16,4096 eventhandler 99 5K - 99 32,64,128 kobj 381 762K - 621 2048 Per-cpu 1 1K - 1 16 rman 225 14K - 508 16,32,64 sbuf 0 0K - 922 16,32,64,128,256,512,1024,2048,4096,8192,32768 taskqueue 21 2K - 21 16,128 terminal 11 3K - 11 256 Unitno 23 2K - 301 16,64 vmem 3 20K - 5 1024,2048,16384 Witness 1539 3238K - 1539 2048,8192 ioctlops 0 0K - 109 256,512,1024,2048 select 14 1K - 14 64 iov 0 0K - 21485 64,128,256 msg 4 25K - 4 1024,4096,16384 sem 4 101K - 4 1024,4096 shm 1 16K - 1 16384 tty 12 6K - 12 512 mbuf_tag 0 0K - 329 32 shmfd 1 4K - 1 4096 soname 8 1K - 11659 16,32,64,128 pcb 19 108K - 55 16,32,64,512,1024,4096,16384,65536 pci_link 10 1K - 10 16,128 vfscache 1 256K - 1 cl_savebuf 0 0K - 1 32 vfs_hash 1 128K - 1 vnodes 1 1K - 1 128 mount 31 2K - 101 16,32,64,128,256 kbdmux 6 22K - 6 16,256,1024,2048,16384 vnodemarker 0 0K - 58 512 BPF 3 1K - 3 64 ifnet 4 4K - 4 64,1024 ifaddr 38 8K - 38 16,32,64,128,256,1024,2048 ether_multi 12 1K - 22 16,32 clone 6 1K - 6 128 lltable 12 2K - 12 128 tun 1 1K - 1 128 routetbl 23 3K - 28 16,64,128,256 80211scan 1 2K - 1 2048 igmp 3 1K - 3 128 in_multi 1 1K - 1 128 sctp_a_it 0 0K - 3 16 sctp_vrf 1 1K - 1 64 sctp_ifa 3 1K - 4 128 sctp_ifn 1 1K - 2 128 sctp_iter 0 0K - 3 256 hostcache 1 16K - 1 16384 syncache 1 64K - 1 65536 in6_mfilter 1 1K - 1 512 in6_multi 15 1K - 25 16,128 ip6_moptions 2 1K - 2 32,128 mld 3 1K - 3 64 inpcbpolicy 9 1K - 434 16 ipsecpolicy 18 3K - 868 128 crypto 1 1K - 1 512 rpc 2 16K - 2 8192 audit_evclass 187 3K - 231 16 pagedep 5 17K - 24 128,16384 inodedep 12 131K - 113 256 bmsafemap 4 5K - 73 128,4096 newblk 7 129K - 66 128 freefrag 6 1K - 26 64 freeblks 1 1K - 33 128 freefile 0 0K - 43 32 diradd 5 1K - 59 64 mkdir 0 0K - 12 64 dirrem 2 1K - 55 64 newdirblk 0 0K - 6 32 freework 2 1K - 35 64,128 jaddref 0 0K - 71 64 jremref 0 0K - 67 64 jnewblk 0 0K - 65 64 jfreefrag 0 0K - 26 64 jseg 10 2K - 46 128 jsegdep 19 1K - 229 32 sbdep 0 0K - 12 32 savedino 0 0K - 20 256 jblocks 2 1K - 2 128 softdep 1 1K - 1 512 ufs_dirhash 72 15K - 72 16,32,64,128,256,512 ufs_quota 1 128K - 1 ufs_mount 3 13K - 3 256,4096,8192 vm_pgdata 2 33K - 2 64,32768 UMAHash 1 1K - 1 256 vm_fictitious 2 2177K - 2 32 atkbddev 2 1K - 2 32 acpi_perf 1 1K - 1 128 acpipwr 5 1K - 9 32,64 CAM queue 8 2K - 22 16,256 memdesc 1 4K - 1 4096 apmdev 1 1K - 1 64 MCA 5 1K - 5 128 nexusdev 4 1K - 4 16 fdesc_mount 1 1K - 1 16 netgraph 1 1K - 1 32 netgraph_msg 0 0K - 115 64,128,256,512,1024 netgraph_hook 2 1K - 30 128 netgraph_node 4 1K - 18 64,128 netgraph_pppoe 1 8K - 29 64,512,8192 netgraph_path 0 0K - 71 16 netgraph_sock 0 0K - 42 16,64 cpuctl 1 1K - 2 16,2048 gem_name 24 9K - 41 16,2048 drm_dma 3 1K - 6 16 drm_sarea 1 1K - 1 16 drm_driver 4 9K - 6 16,32,64,8192 drm_minor 2 1K - 2 64 drm_maps 2 1K - 2 32,64 drm_files 2 1K - 8 64,256 drm_ctxbitmap 1 4K - 1 4096 drm_hashtab 3 2065K - 6 64,16384 drm_kms 38 14K - 99 16,32,64,128,256,1024,2048 drm_vblank 7 1K - 7 16,32 i915gem 16 7K - 18 16,64,128,256,2048,4096 ------------------------------------------------------------------------ vmstat -z ITEM SIZE LIMIT USED FREE REQ FAIL SLEEP UMA Kegs: 256, 0, 201, 9, 201, 0, 0 UMA Zones: 408, 0, 201, 6, 201, 0, 0 UMA Slabs: 88, 0, 1351, 44, 1501, 0, 0 UMA RCntSlabs: 96, 0, 128, 36, 128, 0, 0 UMA Hash: 128, 0, 7, 24, 8, 0, 0 4 Bucket: 16, 0, 30, 470, 247, 0, 0 6 Bucket: 24, 0, 1, 333, 145, 0, 0 8 Bucket: 32, 0, 9, 366, 452, 0, 0 12 Bucket: 48, 0, 0, 0, 0, 0, 0 16 Bucket: 64, 0, 25, 285, 67, 10, 0 32 Bucket: 128, 0, 13, 142, 51, 0, 0 64 Bucket: 256, 0, 26, 49, 83, 0, 0 128 Bucket: 512, 0, 21, 11, 57, 0, 0 256 Bucket: 1024, 0, 50, 6, 157, 0, 0 vmem btag: 28, 0, 3602, 259, 3602, 26, 0 VM OBJECT: 156, 0, 1444, 31, 10839, 0, 0 RADIX NODE: 44, 116025, 3838, 257, 34044, 0, 0 MAP: 144, 0, 3, 78, 3, 0, 0 KMAP ENTRY: 76, 0, 5, 151, 5, 0, 0 MAP ENTRY: 76, 0, 670, 110, 23894, 0, 0 VMSPACE: 240, 0, 27, 37, 833, 0, 0 fakepg: 68, 0, 0, 0, 0, 0, 0 mt_zone: 2060, 0, 435, 0, 435, 0, 0 16: 16, 0, 18, 482, 103, 0, 0 16: 16, 0, 2277, 473, 2422, 0, 0 16: 16, 0, 8, 492, 10, 0, 0 16: 16, 0, 146, 354, 27539, 0, 0 16: 16, 0, 49, 451, 332, 0, 0 16: 16, 0, 396, 604, 4021, 0, 0 16: 16, 0, 205, 295, 526, 0, 0 16: 16, 0, 59, 441, 118, 0, 0 32: 32, 0, 38, 337, 42, 0, 0 32: 32, 0, 465, 160, 466, 0, 0 32: 32, 0, 22, 353, 134, 0, 0 32: 32, 0, 760, 365, 6418, 0, 0 32: 32, 0, 94, 281, 252, 0, 0 32: 32, 0, 1044, 331, 2922, 0, 0 32: 32, 0, 1, 374, 44, 0, 0 32: 32, 0, 8, 367, 51, 0, 0 64: 64, 0, 64, 246, 108, 0, 0 64: 64, 0, 1133, 169, 1139, 0, 0 64: 64, 0, 232, 78, 939, 0, 0 64: 64, 0, 1180, 122, 19163, 0, 0 64: 64, 0, 650, 156, 2080, 0, 0 64: 64, 0, 460, 346, 758, 0, 0 64: 64, 0, 30, 280, 82, 0, 0 64: 64, 0, 24, 286, 19635, 0, 0 128: 128, 0, 70, 85, 112, 0, 0 128: 128, 0, 21, 134, 116, 0, 0 128: 128, 0, 23, 132, 149, 0, 0 128: 128, 0, 279, 124, 1677, 0, 0 128: 128, 0, 60, 95, 208, 0, 0 128: 128, 0, 1630, 137, 13397, 0, 0 128: 128, 0, 28, 127, 98, 0, 0 128: 128, 0, 28, 127, 2180, 0, 0 256: 256, 0, 3, 72, 3, 0, 0 256: 256, 0, 42, 93, 496, 0, 0 256: 256, 0, 59, 16, 64, 0, 0 256: 256, 0, 146, 49, 1451, 0, 0 256: 256, 0, 172, 23, 182, 0, 0 256: 256, 0, 289, 26, 325, 0, 0 256: 256, 0, 12, 63, 12, 0, 0 256: 256, 0, 10, 65, 21, 0, 0 512: 512, 0, 1, 31, 1, 0, 0 512: 512, 0, 1, 31, 31, 0, 0 512: 512, 0, 0, 32, 13, 0, 0 512: 512, 0, 13, 19, 347, 0, 0 512: 512, 0, 14, 18, 500, 0, 0 512: 512, 0, 23, 9, 26, 0, 0 512: 512, 0, 1, 31, 1, 0, 0 512: 512, 0, 25, 7, 215, 0, 0 1024: 1024, 0, 0, 0, 0, 0, 0 1024: 1024, 0, 3, 13, 32, 0, 0 1024: 1024, 0, 0, 16, 14, 0, 0 1024: 1024, 0, 4, 12, 2366, 0, 0 1024: 1024, 0, 2, 14, 263, 0, 0 1024: 1024, 0, 12, 108, 474, 0, 0 1024: 1024, 0, 0, 16, 2, 0, 0 1024: 1024, 0, 3, 13, 54, 0, 0 2048: 2048, 0, 3, 3, 3, 0, 0 2048: 2048, 0, 0, 6, 2, 0, 0 2048: 2048, 0, 0, 0, 0, 0, 0 2048: 2048, 0, 390, 6, 808, 0, 0 2048: 2048, 0, 1538, 2, 1540, 0, 0 2048: 2048, 0, 28, 2, 2734, 0, 0 2048: 2048, 0, 14, 2, 37, 0, 0 2048: 2048, 0, 4, 2, 39, 0, 0 4096: 4096, 0, 0, 0, 0, 0, 0 4096: 4096, 0, 2, 0, 2, 0, 0 4096: 4096, 0, 50, 1, 855, 0, 0 4096: 4096, 0, 6, 1, 277, 0, 0 4096: 4096, 0, 1, 1, 15, 0, 0 4096: 4096, 0, 19, 3, 30, 0, 0 4096: 4096, 0, 5, 0, 5, 0, 0 4096: 4096, 0, 0, 0, 0, 0, 0 8192: 8192, 0, 2, 0, 2, 0, 0 8192: 8192, 0, 0, 0, 0, 0, 0 8192: 8192, 0, 0, 0, 0, 0, 0 8192: 8192, 0, 1, 1, 310, 0, 0 8192: 8192, 0, 3, 0, 3, 0, 0 8192: 8192, 0, 3, 0, 3, 0, 0 8192: 8192, 0, 1, 0, 1, 0, 0 8192: 8192, 0, 0, 1, 64, 0, 0 16384: 16384, 0, 1, 0, 1, 0, 0 16384: 16384, 0, 0, 0, 0, 0, 0 16384: 16384, 0, 0, 0, 0, 0, 0 16384: 16384, 0, 4, 0, 400, 0, 0 16384: 16384, 0, 1, 1, 3, 0, 0 16384: 16384, 0, 9, 0, 9, 0, 0 16384: 16384, 0, 1, 0, 1, 0, 0 16384: 16384, 0, 3, 1, 15, 0, 0 32768: 32768, 0, 0, 0, 0, 0, 0 32768: 32768, 0, 0, 0, 0, 0, 0 32768: 32768, 0, 0, 0, 0, 0, 0 32768: 32768, 0, 5, 1, 139, 0, 0 32768: 32768, 0, 0, 0, 0, 0, 0 32768: 32768, 0, 6, 0, 6, 0, 0 32768: 32768, 0, 0, 0, 0, 0, 0 32768: 32768, 0, 0, 0, 0, 0, 0 65536: 65536, 0, 0, 0, 0, 0, 0 65536: 65536, 0, 0, 0, 0, 0, 0 65536: 65536, 0, 0, 0, 0, 0, 0 65536: 65536, 0, 2, 0, 97, 0, 0 65536: 65536, 0, 0, 1, 58, 0, 0 65536: 65536, 0, 3, 0, 11, 0, 0 65536: 65536, 0, 0, 0, 0, 0, 0 65536: 65536, 0, 1, 0, 1, 0, 0 64 pcpu: 8, 0, 2452, 108, 2452, 0, 0 ptr pcpu: 4, 0, 0, 0, 0, 0, 0 SLEEPQUEUE: 48, 0, 105, 205, 105, 0, 0 Files: 56, 0, 91, 193, 8120, 0, 0 filedesc0: 888, 0, 49, 3, 854, 0, 0 rl_entry: 28, 0, 31, 255, 31, 0, 0 TURNSTILE: 72, 0, 105, 50, 105, 0, 0 umtx pi: 52, 0, 0, 0, 0, 0, 0 MAC labels: 20, 0, 0, 0, 0, 0, 0 PROC: 852, 0, 48, 4, 853, 0, 0 THREAD: 820, 0, 99, 5, 99, 0, 0 cpuset: 40, 0, 70, 230, 70, 0, 0 audit_record: 1112, 0, 0, 0, 0, 0, 0 mbuf_packet: 256, 62505, 142, 115, 239, 0, 0 mbuf: 256, 62505, 16, 241, 1626, 0, 0 mbuf_cluster: 2048, 9766, 253, 3, 253, 0, 0 mbuf_jumbo_page: 4096, 4882, 0, 0, 0, 0, 0 mbuf_jumbo_9k: 9216, 4338, 0, 0, 0, 0, 0 mbuf_jumbo_16k: 16384, 3252, 0, 0, 0, 0, 0 mbuf_ext_refcnt: 4, 0, 0, 0, 0, 0, 0 g_bio: 152, 0, 0, 390, 7829, 0, 0 ttyinq: 152, 0, 135, 73, 450, 0, 0 ttyoutq: 256, 0, 72, 63, 240, 0, 0 nvme_request: 100, 0, 0, 0, 0, 0, 0 vtnet_tx_hdr: 16, 0, 0, 0, 0, 0, 0 vtnet_tx_hdr: 16, 0, 0, 0, 0, 0, 0 cryptop: 60, 0, 0, 0, 0, 0, 0 cryptodesc: 56, 0, 0, 0, 0, 0, 0 FPU_save_area: 512, 0, 0, 0, 0, 0, 0 VNODE: 284, 0, 1078, 28, 1123, 0, 0 VNODEPOLL: 60, 0, 2, 262, 2, 0, 0 BUF TRIE: 44, 0, 162, 3569, 488, 0, 0 NAMEI: 1024, 0, 0, 16, 21516, 0, 0 S VFS Cache: 72, 0, 1083, 72, 3281, 0, 0 STS VFS Cache: 92, 0, 0, 0, 0, 0, 0 L VFS Cache: 292, 0, 0, 0, 0, 0, 0 LTS VFS Cache: 312, 0, 0, 0, 0, 0, 0 NCLNODE: 360, 0, 0, 0, 0, 0, 0 DIRHASH: 1024, 0, 203, 5, 203, 0, 0 pipe: 408, 0, 0, 36, 283, 0, 0 Mountpoints: 672, 0, 3, 15, 3, 0, 0 procdesc: 76, 0, 0, 0, 0, 0, 0 ksiginfo: 80, 0, 37, 1013, 602, 0, 0 itimer: 232, 0, 0, 0, 0, 0, 0 KNOTE: 72, 0, 2, 163, 2, 0, 0 socket: 456, 14928, 32, 32, 2297, 0, 0 unpcb: 172, 14950, 22, 47, 1828, 0, 0 ipq: 32, 375, 0, 0, 0, 0, 0 udp_inpcb: 256, 14940, 7, 68, 425, 0, 0 udpcb: 16, 15000, 7, 493, 425, 0, 0 tcp_inpcb: 256, 14940, 2, 73, 9, 0, 0 tcpcb: 776, 14930, 2, 13, 9, 0, 0 tcptw: 60, 3036, 0, 0, 0, 0, 0 syncache: 128, 15376, 0, 0, 0, 0, 0 hostcache: 80, 15400, 0, 0, 0, 0, 0 sackhole: 20, 0, 0, 0, 0, 0, 0 tcpreass: 20, 800, 0, 0, 0, 0, 0 sctp_ep: 988, 14928, 0, 0, 0, 0, 0 sctp_asoc: 1660, 40000, 0, 0, 0, 0, 0 sctp_laddr: 24, 80160, 0, 334, 4, 0, 0 sctp_raddr: 536, 80003, 0, 0, 0, 0, 0 sctp_chunk: 96, 400037, 0, 0, 0, 0, 0 sctp_readq: 76, 400036, 0, 0, 0, 0, 0 sctp_stream_msg_out: 68, 400026, 0, 0, 0, 0, 0 sctp_asconf: 24, 400132, 0, 0, 0, 0, 0 sctp_asconf_ack: 24, 400132, 0, 0, 0, 0, 0 udplite_inpcb: 256, 14940, 0, 0, 0, 0, 0 ripcb: 256, 14940, 0, 0, 0, 0, 0 rtentry: 108, 0, 9, 139, 11, 0, 0 selfd: 32, 0, 36, 339, 12030, 0, 0 SWAPMETA: 276, 58590, 0, 0, 0, 0, 0 FFS inode: 120, 0, 1036, 119, 1079, 0, 0 FFS1 dinode: 128, 0, 0, 0, 0, 0, 0 FFS2 dinode: 256, 0, 1036, 14, 1079, 0, 0 NetGraph items: 36, 4154, 0, 310, 156, 0, 0 NetGraph data items: 36, 4154, 0, 310, 42, 0, 0 ------------------------------------------------------------------------ vmstat -i interrupt total rate irq0: attimer0 1026628 9606 irq1: atkbd0 438 4 irq9: acpi0 6 0 irq14: ata0 2488 23 irq15: ata1 357 3 Total 1029917 9637 ------------------------------------------------------------------------ pstat -T 91/14922 files 0M/1289M swap space ------------------------------------------------------------------------ pstat -s Device 512-blocks Used Avail Capacity /dev/tun0 2641664 0 2641664 0% ------------------------------------------------------------------------ iostat tty ada0 cd0 pass0 cpu tin tout KB/t tps MB/s KB/t tps MB/s KB/t tps MB/s us ni sy in id 1 80 18.80 5 0.09 0.00 0 0.00 0.00 0 0.00 1 0 2 0 97 ------------------------------------------------------------------------ ipcs -a Message Queues: T ID KEY MODE OWNER GROUP CREATOR CGROUP CBYTES QNUM QBYTES LSPID LRPID STIME RTIME CTIME Shared Memory: T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME Semaphores: T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME ------------------------------------------------------------------------ ipcs -T msginfo: msgmax: 16384 (max characters in a message) msgmni: 40 (# of message queues) msgmnb: 2048 (max characters in a message queue) msgtql: 40 (max # of messages in system) msgssz: 8 (size of a message segment) msgseg: 2048 (# of message segments in system) shminfo: shmmax: 536870912 (max shared memory segment size) shmmin: 1 (min shared memory segment size) shmmni: 192 (max number of shared memory identifiers) shmseg: 128 (max shared memory segments per process) shmall: 131072 (max amount of shared memory in pages) seminfo: semmni: 50 (# of semaphore identifiers) semmns: 340 (# of semaphores in system) semmnu: 150 (# of undo structures in system) semmsl: 340 (max # of semaphores per id) semopm: 100 (max # of operations per semop call) semume: 50 (max # of undo entries per process) semusz: 616 (size in bytes of undo structure) semvmx: 32767 (semaphore maximum value) semaem: 16384 (adjust on exit max value) ------------------------------------------------------------------------ nfsstat Client Info: Rpc Counts: Getattr Setattr Lookup Readlink Read Write Create Remove 0 0 0 0 0 0 0 0 Rename Link Symlink Mkdir Rmdir Readdir RdirPlus Access 0 0 0 0 0 0 0 0 Mknod Fsstat Fsinfo PathConf Commit 0 0 0 0 0 Rpc Info: TimedOut Invalid X Replies Retries Requests 0 0 0 0 0 Cache Info: Attr Hits Misses Lkup Hits Misses BioR Hits Misses BioW Hits Misses 0 0 0 0 0 0 0 0 BioRLHits Misses BioD Hits Misses DirE Hits Misses Accs Hits Misses 0 0 0 0 0 0 0 0 Server Info: Getattr Setattr Lookup Readlink Read Write Create Remove 0 0 0 0 0 0 0 0 Rename Link Symlink Mkdir Rmdir Readdir RdirPlus Access 0 0 0 0 0 0 0 0 Mknod Fsstat Fsinfo PathConf Commit 0 0 0 0 0 Server Ret-Failed 0 Server Faults 0 Server Cache Stats: Inprog Idem Non-idem Misses 0 0 0 0 Server Write Gathering: WriteOps WriteRPC Opsaved 0 0 0 ------------------------------------------------------------------------ netstat -s tcp: 0 packets sent 0 data packets (0 bytes) 0 data packets (0 bytes) retransmitted 0 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 0 ack-only packets (0 delayed) 0 URG only packets 0 window probe packets 0 window update packets 0 control packets 0 packets received 0 acks (for 0 bytes) 0 duplicate acks 0 acks for unsent data 0 packets (0 bytes) received in-sequence 0 completely duplicate packets (0 bytes) 0 old duplicate packets 0 packets with some dup. data (0 bytes duped) 0 out-of-order packets (0 bytes) 0 packets (0 bytes) of data after window 0 window probes 0 window update packets 0 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 0 discarded due to memory problems 0 connection requests 0 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 0 connections established (including accepts) 7 connections closed (including 0 drops) 0 connections updated cached RTT on close 0 connections updated cached RTT variance on close 0 connections updated cached ssthresh on close 0 embryonic connections dropped 0 segments updated rtt (of 0 attempts) 0 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 0 keepalive timeouts 0 keepalive probes sent 0 connections dropped by keepalive 0 correct ACK header predictions 0 correct data packet header predictions 0 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 0 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 0 cookies sent 0 cookies received 0 hostcache entries added 0 bucket overflow 0 SACK recovery episodes 0 segment rexmits in SACK recovery episodes 0 byte rexmits in SACK recovery episodes 0 SACK options (SACK blocks) received 0 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 0 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 0 with no checksum 0 dropped due to no socket 0 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 0 delivered 0 datagrams output 0 times multicast source filter matched ip: 0 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 packets reassembled ok 0 packets for this host 0 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 0 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 0 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 0 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored 0 message responses generated 0 invalid return addresses 0 no return routes ipsec: 0 inbound packets violated process security policy 0 inbound packets failed due to insufficient memory 0 invalid inbound packets 0 outbound packets violated process security policy 0 outbound packets with no SA available 0 outbound packets failed due to insufficient memory 0 outbound packets with no route available 0 invalid outbound packets 0 outbound packets with bundled SAs 0 mbufs coalesced during clone 0 clusters coalesced during clone 0 clusters copied during clone 0 mbufs inserted during makespace ah: 0 packets shorter than header shows 0 packets dropped; protocol family not supported 0 packets dropped; no TDB 0 packets dropped; bad KCR 0 packets dropped; queue full 0 packets dropped; no transform 0 replay counter wraps 0 packets dropped; bad authentication detected 0 packets dropped; bad authentication length 0 possible replay packets detected 0 packets in 0 packets out 0 packets dropped; invalid TDB 0 bytes in 0 bytes out 0 packets dropped; larger than IP_MAXPACKET 0 packets blocked due to policy 0 crypto processing failures 0 tunnel sanity check failures esp: 0 packets shorter than header shows 0 packets dropped; protocol family not supported 0 packets dropped; no TDB 0 packets dropped; bad KCR 0 packets dropped; queue full 0 packets dropped; no transform 0 packets dropped; bad ilen 0 replay counter wraps 0 packets dropped; bad encryption detected 0 packets dropped; bad authentication detected 0 possible replay packets detected 0 packets in 0 packets out 0 packets dropped; invalid TDB 0 bytes in 0 bytes out 0 packets dropped; larger than IP_MAXPACKET 0 packets blocked due to policy 0 crypto processing failures 0 tunnel sanity check failures ipcomp: 0 packets shorter than header shows 0 packets dropped; protocol family not supported 0 packets dropped; no TDB 0 packets dropped; bad KCR 0 packets dropped; queue full 0 packets dropped; no transform 0 replay counter wraps 0 packets in 0 packets out 0 packets dropped; invalid TDB 0 bytes in 0 bytes out 0 packets dropped; larger than IP_MAXPACKET 0 packets blocked due to policy 0 crypto processing failures 0 packets sent uncompressed; size < compr. algo. threshold 0 packets sent uncompressed; compression was useless arp: 0 ARP requests sent 0 ARP replies sent 0 ARP requests received 0 ARP replies received 0 ARP packets received 0 total packets dropped due to no ARP entry 0 ARP entrys timed out 0 Duplicate IPs seen ip6: 0 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 0 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 1 packet sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 0 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Mbuf statistics: 0 one mbuf 0 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not contiguous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 1 failure of source address selection source addresses on a non-outgoing I/F 1 addresses scope=%x Source addresses selection rule applied: 1 same address icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation Output histogram: neighbor solicitation: 1 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes ipsec6: 0 inbound packets violated process security policy 0 inbound packets failed due to insufficient memory 0 invalid inbound packets 0 outbound packets violated process security policy 0 outbound packets with no SA available 0 outbound packets failed due to insufficient memory 0 outbound packets with no route available 0 invalid outbound packets 0 outbound packets with bundled SAs 0 mbufs coalesced during clone 0 clusters coalesced during clone 0 clusters copied during clone 0 mbufs inserted during makespace rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output pfkey: 0 requests sent from userland 0 bytes sent from userland 0 messages with invalid length field 0 messages with invalid version field 0 messages with invalid message type field 0 messages too short 0 messages with memory allocation failure 0 messages with duplicate extension 0 messages with invalid extension type 0 messages with invalid sa type 0 messages with invalid address extension 0 requests sent to userland 0 bytes sent to userland 0 messages toward single socket 0 messages toward all sockets 0 messages toward registered sockets 0 messages with memory allocation failure ------------------------------------------------------------------------ netstat -m 158/356/514 mbufs in use (current/cache/total) 138/118/256/9766 mbuf clusters in use (current/cache/total/max) 142/115 mbuf+clusters out of packet secondary zone in use (current/cache) 0/0/0/4882 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/4338 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3252 16k jumbo clusters in use (current/cache/total/max) 315K/325K/640K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for mbufs delayed (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters delayed (4k/9k/16k) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) ------------------------------------------------------------------------ netstat -anA Active Internet connections (including servers) Tcpcb Proto Recv-Q Send-Q Local Address Foreign Address (state) c5b3e308 tcp4 0 0 127.0.0.1.25 *.* LISTEN c5b3e610 tcp4 0 0 *.80 *.* LISTEN c5a89900 udp4 0 0 127.0.0.1.123 *.* c5a89a00 udp6 0 0 fe80::1%lo0.123 *.* c5a89b00 udp6 0 0 ::1.123 *.* c5a89c00 udp4 0 0 *.123 *.* c5a89d00 udp6 0 0 *.123 *.* c5a89e00 udp4 0 0 *.514 *.* c5a8a000 udp6 0 0 *.514 *.* Active UNIX domain sockets Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr c5aaeac0 stream 0 0 c593bb18 0 0 0 /tmp/.X11-unix/X0 c5aaee1c stream 0 0 0 c5aaeec8 0 0 c5aaeec8 stream 0 0 0 c5aaee1c 0 0 c5aaf000 stream 0 0 c5b70354 0 0 0 /var/run/dbus/system_bus_socket c5aaf158 stream 0 0 0 c5aaf204 0 0 c5aaf204 stream 0 0 0 c5aaf158 0 0 c5aaf2b0 stream 0 0 0 c5aaf35c 0 0 /var/run/devd.pipe c5aaf35c stream 0 0 0 c5aaf2b0 0 0 c5aaf4b4 stream 0 0 c5b1bb18 0 0 0 /var/run/casper c5aaf560 stream 0 0 0 c5aaf60c 0 0 c5aaf60c stream 0 0 0 c5aaf560 0 0 c5aaf968 stream 0 0 c5a8e238 0 0 0 /var/run/devd.pipe c5aaeb6c dgram 0 0 0 c5aaf764 0 c5aaecc4 c5aaec18 dgram 0 0 0 c5aaf810 0 0 c5aaecc4 dgram 0 0 0 c5aaf764 0 c5aaed70 c5aaed70 dgram 0 0 0 c5aaf764 0 c5aaf0ac c5aaf0ac dgram 0 0 0 c5aaf764 0 c5aaf408 c5aaf408 dgram 0 0 0 c5aaf764 0 c5aaf6b8 c5aaf6b8 dgram 0 0 0 c5aaf764 0 0 c5aaf764 dgram 0 0 c5ad28e0 0 c5aaeb6c 0 /var/run/logpriv c5aaf810 dgram 0 0 c5ad29fc 0 c5aaec18 0 /var/run/log c5aaf8bc seqpac 0 0 c5a8e11c 0 0 0 /var/run/devd.seqpacket.pipe ------------------------------------------------------------------------ netstat -aL Current listen queue sizes (qlen/incqlen/maxqlen) Proto Listen Local Address tcp4 0/0/10 localhost.smtp tcp4 0/0/128 *.http unix 0/0/128 /tmp/.X11-unix/X0 unix 0/0/30 /var/run/dbus/system_bus_socket unix 0/0/8 /var/run/casper unix 0/0/4 /var/run/devd.pipe unix 0/0/4 /var/run/devd.seqpacket.pipe ------------------------------------------------------------------------ fstat fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 4 at 0x4000000 fstat: can't read file 6 at 0xffff fstat: can't read file 7 at 0x78 fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 4 at 0x4000000 fstat: can't read file 6 at 0xffff fstat: can't read file 7 at 0x78 fstat: can't read file 9 at 0x2 fstat: can't read file 9 at 0xd0 fstat: can't read file 19 at 0x84 fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 4 at 0x4000000 fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 4 at 0x4000000 fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 4 at 0x4000000 fstat: can't read file 6 at 0xffff fstat: can't read file 7 at 0x78 fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 4 at 0x4000000 fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 4 at 0x4000000 fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 4 at 0x4000000 fstat: can't read file 6 at 0xffff fstat: can't read file 7 at 0x78 fstat: can't read file 9 at 0x6 fstat: can't read file 11 at 0xffffffff fstat: can't read file 12 at 0x20007ff fstat: can't read file 13 at 0x1fffff fstat: can't read file 14 at 0x4000000 fstat: can't read file 16 at 0xffff fstat: can't read file 17 at 0x78 fstat: can't read file 19 at 0x6 fstat: can't read file 21 at 0xffffffff fstat: can't read file 22 at 0x20007ff fstat: can't read file 23 at 0x1fffff fstat: can't read file 24 at 0x4000000 fstat: can't read file 26 at 0xffff fstat: can't read file 27 at 0x78 fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 4 at 0x4000000 fstat: can't read file 6 at 0xffff fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 4 at 0x4000000 fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 4 at 0x4000000 fstat: can't read file 6 at 0xffff fstat: can't read file 7 at 0x78 fstat: can't read file 9 at 0x4 fstat: can't read file 11 at 0xffffffff fstat: can't read file 12 at 0x20007ff fstat: can't read file 13 at 0x1fffff fstat: can't read file 14 at 0x4000000 fstat: can't read file 16 at 0xffff fstat: can't read file 17 at 0x78 fstat: can't read file 19 at 0x4 fstat: can't read file 1 at 0xffffffff fstat: can't read file 2 at 0x20007ff fstat: can't read file 3 at 0x1fffff fstat: can't read file 4 at 0x4000000 fstat: can't read file 6 at 0xffff fstat: can't read file 7 at 0x78 USER CMD PID FD MOUNT INUM MODE SZ|DV R/W root Xorg 853 root / 2 drwxr-xr-x 1024 r root Xorg 853 wd / 584922 drwxr-x--- 5632 r root Xorg 853 text / 4337436 -r-sr-xr-x 2032296 r root Xorg 853 ctty /dev 69 crw------- ttyv0 rw root Xorg 853 0 / 2086729 -rw-r--r-- 11825 w myuser xinit 852 root / 2 drwxr-xr-x 1024 r myuser xinit 852 wd / 584922 drwxr-x--- 5632 r myuser xinit 852 text / 4335893 -r-xr-xr-x 12464 r myuser xinit 852 ctty /dev 69 crw------- ttyv0 rw myuser xinit 852 0 /dev 69 crw------- ttyv0 rw myuser sh 839 root / 2 drwxr-xr-x 1024 r myuser sh 839 wd / 584922 drwxr-x--- 5632 r myuser sh 839 text / 3372687 -r-xr-xr-x 127552 r myuser sh 839 ctty /dev 69 crw------- ttyv0 rw myuser sh 839 0 /dev 69 crw------- ttyv0 rw myuser sh 839 10 /dev 69 crw------- ttyv0 rw myuser tcsh 836 root / 2 drwxr-xr-x 1024 r myuser tcsh 836 wd / 584922 drwxr-x--- 5632 r myuser tcsh 836 text / 3372596 -r-xr-xr-x 337264 r myuser tcsh 836 ctty /dev 69 crw------- ttyv0 rw root login 835 root / 2 drwxr-xr-x 1024 r root login 835 wd / 584922 drwxr-x--- 5632 r root login 835 text / 3373149 -r-sr-xr-x 21808 r root login 835 ctty /dev 69 crw------- ttyv0 rw root login 835 0 /dev 69 crw------- ttyv0 rw root getty 819 root / 2 drwxr-xr-x 1024 r root getty 819 wd / 2 drwxr-xr-x 1024 r root getty 819 text / 3372514 -r-xr-xr-x 24436 r root getty 819 ctty /dev 76 crw------- ttyv7 rw root getty 819 0 /dev 76 crw------- ttyv7 rw root getty 818 root / 2 drwxr-xr-x 1024 r root getty 818 wd / 2 drwxr-xr-x 1024 r root getty 818 text / 3372514 -r-xr-xr-x 24436 r root getty 818 ctty /dev 75 crw------- ttyv6 rw root getty 818 0 /dev 75 crw------- ttyv6 rw root getty 817 root / 2 drwxr-xr-x 1024 r root getty 817 wd / 2 drwxr-xr-x 1024 r root getty 817 text / 3372514 -r-xr-xr-x 24436 r root getty 817 ctty /dev 74 crw------- ttyv5 rw root getty 817 0 /dev 74 crw------- ttyv5 rw root getty 816 root / 2 drwxr-xr-x 1024 r root getty 816 wd / 2 drwxr-xr-x 1024 r root getty 816 text / 3372514 -r-xr-xr-x 24436 r root getty 816 ctty /dev 73 crw------- ttyv4 rw root getty 816 0 /dev 73 crw------- ttyv4 rw root getty 815 root / 2 drwxr-xr-x 1024 r root getty 815 wd / 2 drwxr-xr-x 1024 r root getty 815 text / 3372514 -r-xr-xr-x 24436 r root getty 815 ctty /dev 72 crw------- ttyv3 rw root getty 815 0 /dev 72 crw------- ttyv3 rw root getty 814 root / 2 drwxr-xr-x 1024 r root getty 814 wd / 2 drwxr-xr-x 1024 r root getty 814 text / 3372514 -r-xr-xr-x 24436 r root getty 814 ctty /dev 71 crw------- ttyv2 rw root getty 814 0 /dev 71 crw------- ttyv2 rw root getty 813 root / 2 drwxr-xr-x 1024 r root getty 813 wd / 2 drwxr-xr-x 1024 r root getty 813 text / 3372514 -r-xr-xr-x 24436 r root getty 813 ctty /dev 70 crw------- ttyv1 rw root getty 813 0 /dev 70 crw------- ttyv1 rw root cron 765 root / 2 drwxr-xr-x 1024 r root cron 765 wd / 2086671 drwxr-x--- 512 r root cron 765 text / 3373374 -r-xr-xr-x 35108 r root cron 765 0 /dev 32 crw-rw-rw- null rw smmsp sendmail 761 root / 2 drwxr-xr-x 1024 r smmsp sendmail 761 wd / 2166912 drwxrwx--- 512 r smmsp sendmail 761 text / 3373546 -r-xr-sr-x 676624 r smmsp sendmail 761 0 /dev 32 crw-rw-rw- null r root sendmail 758 root / 2 drwxr-xr-x 1024 r root sendmail 758 wd / 2166913 drwxr-xr-x 512 r root sendmail 758 text / 3373546 -r-xr-sr-x 676624 r root sendmail 758 0 /dev 32 crw-rw-rw- null r root sshd 755 root / 2 drwxr-xr-x 1024 r root sshd 755 wd / 2 drwxr-xr-x 1024 r root sshd 755 text / 3373029 -r-xr-xr-x 272728 r root sshd 755 0 /dev 32 crw-rw-rw- null rw root perl 722 root / 2 drwxr-xr-x 1024 r root perl 722 wd / 2 drwxr-xr-x 1024 r root perl 722 text / 4338566 -rwxr-xr-x 5564 r root perl 722 0 /dev 32 crw-rw-rw- null r messageb dbus-daemon 714 root / 2 drwxr-xr-x 1024 r messageb dbus-daemon 714 wd / 2 drwxr-xr-x 1024 r messageb dbus-daemon 714 text / 4334217 -rwxr-xr-x 360360 r messageb dbus-daemon 714 0 /dev 32 crw-rw-rw- null rw root moused 696 root / 2 drwxr-xr-x 1024 r root moused 696 wd / 2 drwxr-xr-x 1024 r root moused 696 text / 3373465 -r-xr-xr-x 36848 r root moused 696 0 /dev 32 crw-rw-rw- null rw root powerd 670 root / 2 drwxr-xr-x 1024 r root powerd 670 wd / 2 drwxr-xr-x 1024 r root powerd 670 text / 3373511 -r-xr-xr-x 13808 r root powerd 670 0 /dev 32 crw-rw-rw- null rw root ntpd 667 root / 2 drwxr-xr-x 1024 r root ntpd 667 wd / 2 drwxr-xr-x 1024 r root ntpd 667 text / 3373483 -r-xr-xr-x 769384 r root ntpd 667 0 /dev 32 crw-rw-rw- null r root ntpd 667 10 /dev 32 crw-rw-rw- null r root ntpd 667 20 /dev 32 crw-rw-rw- null r root casperd 612 root / 2 drwxr-xr-x 1024 r root casperd 612 wd / 2 drwxr-xr-x 1024 r root casperd 612 text / 3372887 -r-xr-xr-x 18952 r root casperd 612 0 /dev 32 crw-rw-rw- null rw root casperd 611 root / 2 drwxr-xr-x 1024 r root casperd 611 wd / 2 drwxr-xr-x 1024 r root casperd 611 text / 3372887 -r-xr-xr-x 18952 r root casperd 611 0 /dev 32 crw-rw-rw- null rw root syslogd 585 root / 2 drwxr-xr-x 1024 r root syslogd 585 wd / 2 drwxr-xr-x 1024 r root syslogd 585 text / 3373568 -r-xr-xr-x 36568 r root syslogd 585 0 /dev 32 crw-rw-rw- null rw root syslogd 585 10 /dev 32 crw-rw-rw- null rw root ng_queue 444 root / 2 drwxr-xr-x 1024 r root ng_queue 444 wd / 2 drwxr-xr-x 1024 r root ppp 436 root / 2 drwxr-xr-x 1024 r root ppp 436 wd / 2 drwxr-xr-x 1024 r root ppp 436 text / 3373512 -r-sr-xr-- 377876 r root devd 412 root / 2 drwxr-xr-x 1024 r root devd 412 wd / 2 drwxr-xr-x 1024 r root devd 412 text / 3372893 -r-xr-xr-x 962928 r root devd 412 0 /dev 32 crw-rw-rw- null rw root init 1 root / 2 drwxr-xr-x 1024 r root init 1 wd / 2 drwxr-xr-x 1024 r root init 1 text / 3372936 -r-xr-xr-x 871228 r root kernel 0 root / 2 drwxr-xr-x 1024 r root kernel 0 wd / 2 drwxr-xr-x 1024 r ------------------------------------------------------------------------ dmesg Copyright (c) 1992-2015 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #0 3820047(drm-i915-update-38): Sat Oct 17 20:09:30 CEST 2015 root@marnie.dom.braml.org:/usr/obj/usr/home/myuser/freebsd-base-graphics/sys/GENERIC i386 FreeBSD clang version 3.6.1 (tags/RELEASE_361/final 237755) 20150525 WARNING: WITNESS option enabled, expect reduced performance. VT(vga): resolution 640x480 CPU: Intel(R) Pentium(R) M processor 1500MHz (1499.86-MHz 686-class CPU) Origin="GenuineIntel" Id=0x695 Family=0x6 Model=0x9 Stepping=5 Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> Features2=0x180<EST,TM2> real memory = 536870912 (512 MB) avail memory = 473137152 (451 MB) random: unblocking device. random: entropy device external interface kbd1 at kbdmux0 module_register_init: MOD_LOAD (vesa, 0xc10d6860, 0) error 19 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <PTLTD Montara> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xe8000000-0xefffffff,0xe0000000-0xe007ffff irq 11 at device 2.0 on pci0 agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> on vgapci0 agp0: aperture size is 128M, detected 16252k stolen memory vgapci0: Boot video device vgapci1: <VGA-compatible display> mem 0xf0000000-0xf7ffffff,0xe0080000-0xe00fffff at device 2.1 on pci0 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 10 at device 29.2 on pci0 usbus2 on uhci2 ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe0100000-0xe01003ff irq 11 at device 29.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ipw0: <Intel(R) PRO/Wireless 2100 MiniPCI> mem 0xe0200000-0xe0200fff irq 10 at device 1.0 on pci1 cbb0: <RF5C476 PCI-CardBus Bridge> irq 11 at device 3.0 on pci1 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <RF5C476 PCI-CardBus Bridge> irq 10 at device 3.1 on pci1 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci1: <serial bus, FireWire> at device 3.2 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem 0xe0201800-0xe02018ff irq 10 at device 5.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:40:ca:c4:40:84 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xe0100c00-0xe0100dff,0xe0100800-0xe01008ff irq 10 at device 31.5 on pci0 pcm0: <Avance Logic ALC202 AC97 Codec> acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xcd7ff,0xdb800-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0 ppc0: parallel port not found. est0: <Enhanced SpeedStep Frequency Control> on cpu0 est0: current setting not found in table Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 usbus3: 480Mbps High Speed USB v2.0 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ata1: timeout waiting for read DRQ (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ata1:0:1:0): CAM status: CCB request completed with an error (aprobe0:ata1:0:1:0): Retrying command uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ata1:0:1:0): CAM status: Command timeout (aprobe0:ata1:0:1:0): Error 5, Retries exhausted ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <IC25N040ATMR04-0 MO2OAD4A> ATA-6 device ada0: Serial Number MRG277KBG0X8RH ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 38154MB (78140160 512 byte sectors: 16H 63S/T 16383C) ata1: timeout waiting for read DRQ (aprobe1:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe1:ata1:0:1:0): CAM status: CCB request completed with an error (aprobe1:ata1:0:1:0): Retrying command ata1: timeout waiting for read DRQ (aprobe1:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe1:ata1:0:1:0): CAM status: CCB request completed with an error (aprobe1:ata1:0:1:0): Error 5, Retries exhausted ada0: Previously was known as ad0 Timecounter "TSC" frequency 1499861092 Hz quality 800 WARNING: WITNESS option enabled, expect reduced performance. cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: <QSI DVD+-RW SDW-082 LX32> Removable CD-ROM SCSI device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ada0p2 [rw]... Setting hostuuid: c4ca4000-8440-8000-11d7-ae7b9ed9c000. Setting hostid: 0x2df11ff7. Starting file system checks: /dev/ada0p2: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ada0p2: clean, 545779 free (46171 frags, 62451 blocks, 0.5% fragmentation) Mounting local file systems:. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib /usr/local/lib/compat /usr/local/lib/ffmpeg0 /usr/local/lib/graphviz /usr/local/lib/mysql /usr/local/lib/nss /usr/local/lib/pth /usr/local/lib/qt4 /usr/local/lib/wine /usr/local/llvm36/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout Setting hostname: marnie.dom.braml.org. Setting up harvesting:[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy:. ifconfig: SIOCIFCREATE2: Device not configured Starting Network: lo0 rl0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> groups: lo rl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=2008<VLAN_MTU,WOL_MAGIC> ether 00:40:ca:c4:40:84 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> rl0: link state changed to DOWN media: Ethernet autoselect status: no carrier Starting devd. Starting Network: rl0. rl0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=2008<VLAN_MTU,WOL_MAGIC> ether 00:40:ca:c4:40:84 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect status: no carrier Starting PPP profile: alice tun0: link state changed to UP . add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 WARNING: attempt to domain_add(netgraph) after domainfinalize() Creating and/or trimming log files. Starting syslogd. No core dumps found. Starting casperd. lock order reversal: 1st 0xc4adf444 bufwait (bufwait) @ /usr/home/myuser/freebsd-base-graphics/sys/kern/vfs_bio.c:3344 2nd 0xc58f0a00 dirhash (dirhash) @ /usr/home/myuser/freebsd-base-graphics/sys/ufs/ufs/ufs_dirhash.c:281 KDB: stack backtrace: db_trace_self_wrapper(c1545960,7379732f,7366752f,7366752f,7366752f,...) at db_trace_self_wrapper+0x2a/frame 0xda280720 kdb_backtrace(c154977c,c58f0a00,c1584a0a,c4da8fa8,c1584639,...) at kdb_backtrace+0x2d/frame 0xda280788 witness_checkorder(c58f0a00,9,c1584639,119,0,...) at witness_checkorder+0xd6e/frame 0xda2807dc _sx_xlock(c58f0a00,0,c1584639,119,0,...) at _sx_xlock+0x74/frame 0xda28080c ufsdirhash_add(c5b248e8,da280958,55b4,da280898,da28089c,...) at ufsdirhash_add+0x37/frame 0xda280840 ufs_direnter(c5b27d50,c5b277c4,da280958,da280b3c,c4adf904,...) at ufs_direnter+0x654/frame 0xda2808c8 ufs_mkdir(da280bd8,c1801ffc,c5b27d50,da280bd4,10,...) at ufs_mkdir+0x7ec/frame 0xda280a74 VOP_MKDIR_APV(c17ed810,da280bd8,da280b3c,da280b68,28412000,...) at VOP_MKDIR_APV+0xfe/frame 0xda280aa0 kern_mkdirat(c58e1000,ffffff9c,28412000,0,1c0) at kern_mkdirat+0x23a/frame 0xda280bfc sys_mkdir(c58e1000,da280ca8,c1538a7e,4,c1a497d4,...) at sys_mkdir+0x31/frame 0xda280c18 syscall(da280ce8) at syscall+0x3b5/frame 0xda280cdc Xint0x80_syscall() at Xint0x80_syscall+0x2c/frame 0xda280cdc --- syscall (136, FreeBSD ELF32, sys_mkdir), eip = 0x28198867, esp = 0xbfbfe924, ebp = 0xbfbfedd0 --- Clearing /tmp (X related). Updating motd:. Mounting late file systems:. Starting ntpd. Starting powerd. Updating cpucodes... /usr/local/share/cpucontrol/m2069507.fw: updating cpu /dev/cpuctl0 from rev 0x5 to rev 0x7... done. Done. Starting default moused. Starting dbus. Starting ddclient. Configuring vt: keymap blanktime. Performing sanity check on sshd configuration. Starting sshd. Starting sendmail_submit. Starting sendmail_msp_queue. Starting cron. Starting background file system checks in 60 seconds. Sun Oct 18 00:34:40 CEST 2015 Oct 18 00:40:16 marnie login: ROOT LOGIN (root) ON ttyv0 info: [drm] Initialized drm 1.1.0 20060810 [drm:pid831:drm_probe_helper] drmn0 desc: Intel i852GM/i855GM GMCH drmn0: <Intel i852GM/i855GM GMCH> on vgapci0 [drm:pid831:drm_get_pci_dev] [drm:pid831:drm_ctxbitmap_next] bit : 0 [drm:pid831:drm_ctxbitmap_init] drm_ctxbitmap_init : 0 [drm:pid831:drm_get_minor] [drm:pid831:drm_get_minor] new minor assigned 64 [drm:pid831:drm_get_minor] [drm:pid831:drm_get_minor] new minor assigned 0 [drm:KMS:pid831:i915_dump_device_info] i915 device info: gen=2, pciid=0x3582 flags=is_mobile,is_i85x,cursor_needs_physical,has_overlay,overlay_needs_physical,[drm:pid831:drm_addmap_core] offset = 0xe0000000, size = 0x00080000, type = 1 iicbus0: <Philips I2C bus> on iicbb0 addr 0xda iic0: <I2C generic I/O> on iicbus0 iic1: <I2C generic I/O> on iicbus1 iicbus2: <Philips I2C bus> on iicbb1 addr 0xda iic2: <I2C generic I/O> on iicbus2 iic3: <I2C generic I/O> on iicbus3 iicbus4: <Philips I2C bus> on iicbb2 addr 0xda iic4: <I2C generic I/O> on iicbus4 iic5: <I2C generic I/O> on iicbus5 iicbus6: <Philips I2C bus> on iicbb3 addr 0xda iic6: <I2C generic I/O> on iicbus6 iic7: <I2C generic I/O> on iicbus7 iicbus8: <Philips I2C bus> on iicbb4 addr 0xda iic8: <I2C generic I/O> on iicbus8 iic9: <I2C generic I/O> on iicbus9 iicbus10: <Philips I2C bus> on iicbb5 addr 0xda iic10: <I2C generic I/O> on iicbus10 iic11: <I2C generic I/O> on iicbus11 [drm:pid831:intel_opregion_setup] graphic opregion physical addr: 0x0 [drm:pid831:intel_opregion_setup] ACPI OpRegion not supported! [drm:pid831:drm_pci_enable_msi] MSI count = 0 info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. [drm:KMS:pid831:init_vbt_defaults] Set default to SSC at 66MHz [drm:KMS:pid831:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 48 display_clock_mode 0 fdi_rx_polarity_inverted 0 [drm:KMS:pid831:parse_general_definitions] crt_ddc_bus_pin: 2 [drm:KMS:pid831:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [drm:KMS:pid831:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [drm:KMS:pid831:parse_lfp_panel_data] VBT initial LVDS value 40000300 [drm:KMS:pid831:parse_sdvo_device_mapping] different child size is found. Invalid. [drm:KMS:pid831:parse_device_mapping] different child size is found. Invalid. [drm:KMS:pid831:intel_modeset_init] 2 display pipes available. [drm:KMS:pid831:intel_modeset_init] plane 0 init failed: -19 [drm:KMS:pid831:intel_modeset_init] plane 1 init failed: -19 [drm:KMS:pid831:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation [drm:KMS:pid831:intel_lvds_init] using preferred mode from EDID: [drm:KMS:pid831:drm_mode_debug_printmodeline] Modeline 8:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa [drm:KMS:pid831:intel_panel_get_backlight] get backlight PWM = 0 [drm:KMS:pid831:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395827 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0038 r(1) [drm:KMS:pid831:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395828 [drm:KMS:pid831:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395827 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0076 r(1) [drm:KMS:pid831:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395828 [drm:KMS:pid831:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -984386419 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus ssc] NAK for addr: 0002 r(0) [drm:KMS:pid831:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -984386420 [drm:KMS:pid831:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395827 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0038 r(1) [drm:KMS:pid831:tfp410_init] tfp410 not detected got VID FFFFFFFF: from iicbus9 Slave 56. [drm:KMS:pid831:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395828 [drm:KMS:pid831:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395827 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0075 r(1) [drm:KMS:pid831:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395828 [drm:KMS:pid831:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395827 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0038 r(1) [drm:KMS:pid831:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395828 drmn0: taking over the fictitious range 0xe8000000-0xf0000000 info: [drm] initialized overlay support [drm:KMS:pid831:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: enabled [drm:KMS:pid831:intel_modeset_setup_hw_state] [CRTC:4] hw state readout: enabled [drm:KMS:pid831:intel_modeset_setup_hw_state] [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=1 [drm:KMS:pid831:intel_modeset_setup_hw_state] [ENCODER:12:DAC-12] hw state readout: disabled, pipe=0 [drm:KMS:pid831:intel_modeset_setup_hw_state] [CONNECTOR:5:LVDS-1] hw state readout: enabled [drm:KMS:pid831:intel_modeset_setup_hw_state] [CONNECTOR:11:VGA-1] hw state readout: disabled [drm:pid831:drm_calc_vbltimestamp_from_scanoutpos] crtc 0: Noop due to uninitialized mode. [drm:KMS:pid831:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid831:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid831:i9xx_update_wm] FIFO watermarks - A: 40, B: 40 [drm:KMS:pid831:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1 [drm:KMS:pid831:intel_sanitize_crtc] [CRTC:3] hw state adjusted, was enabled, now disabled [drm:KMS:pid831:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid831:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid831:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid831:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid831:intel_modeset_check_state] [CRTC:4] [drm:pid831:drm_irq_install] irq=11 info: [drm] Connector LVDS-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.LVDS-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector VGA-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.VGA-1 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid831:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid831:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid831:drm_mode_debug_printmodeline] Modeline 13:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa [drm:KMS:pid831:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid831:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid831:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid831:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid831:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid831:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid831:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid831:intel_get_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12] [drm:KMS:pid831:intel_get_load_detect_pipe] creating tmp fb for load-detection [drm:KMS:pid831:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:KMS:pid831:intel_modeset_adjusted_mode] [CRTC:3] [drm:pid831:drm_vblank_get] enabling vblank on crtc 0, ret: -22 [drm:KMS:pid831:i9xx_crtc_mode_set] Mode for pipe A: [drm:KMS:pid831:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa [drm:KMS:pid831:i9xx_update_plane] Writing base 00020000 00000000 0 0 2560 [drm:KMS:pid831:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid831:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid831:i9xx_update_wm] FIFO watermarks - A: 40, B: 40 [drm:KMS:pid831:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1 [drm:KMS:pid831:intel_crtc_mode_set] [ENCODER:12:DAC-12] set [MODE:0:640x480] [drm:KMS:pid831:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid831:intel_calculate_wm] FIFO entries required for mode: 20 [drm:KMS:pid831:intel_calculate_wm] FIFO watermark level: 20 [drm:KMS:pid831:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid831:i9xx_update_wm] FIFO watermarks - A: 20, B: 40 [drm:KMS:pid831:i9xx_update_wm] Setting FIFO watermarks - A: 20, B: 40, C: 2, SR 1 [drm:pid831:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 832, vtotal 520, vdisplay 480 [drm:pid831:drm_calc_timestamping_constants] crtc 3: clock 31500 kHz framedur 13734240 linedur 26412, pixeldur 31 [drm:KMS:pid831:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid831:intel_connector_check_state] [CONNECTOR:11:VGA-1] [drm:KMS:pid831:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid831:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid831:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid831:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid831:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid831:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid831:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid831:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid831:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid831:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid831:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid831:intel_crt_load_detect] starting load-detect on CRT [drm:KMS:pid831:intel_release_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12] [drm:KMS:pid831:intel_set_mode] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [drm:pid831:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 5 p(0,0)@ 451.121730 -> 451.121730 [e 0 us, 0 rep] [drm:KMS:pid831:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid831:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid831:i9xx_update_wm] FIFO watermarks - A: 40, B: 40 [drm:KMS:pid831:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1 [drm:KMS:pid831:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid831:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid831:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid831:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid831:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid831:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] disconnected [drm:KMS:pid831:drm_setup_crtcs] [drm:KMS:pid831:drm_enable_connectors] connector 5 enabled? yes [drm:KMS:pid831:drm_enable_connectors] connector 11 enabled? no [drm:KMS:pid831:drm_target_preferred] looking for cmdline mode on connector 5 [drm:KMS:pid831:drm_target_preferred] looking for preferred mode on connector 5 [drm:KMS:pid831:drm_target_preferred] found mode 1024x768 [drm:KMS:pid831:drm_setup_crtcs] picking CRTCs for 2048x2048 config [drm:KMS:pid831:drm_setup_crtcs] desired mode 1024x768 set on crtc 4 [drm:KMS:pid831:intelfb_create] allocated 1024x768 (s 24bits) fb: 0x00020000, bo 0xc5226500 fbd0 on drmn0 VT: Replacing driver "vga" with new "fb". info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0 [drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [NOFB] [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:KMS:pid0:intel_crtc_set_config] [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [drm:KMS:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set [drm:KMS:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 8:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:KMS:pid0:intel_crtc_set_config] attempting to set mode from userspace [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 8:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa [drm:KMS:pid0:intel_set_mode] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [drm:KMS:pid0:intel_modeset_adjusted_mode] [CRTC:4] [drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0 [drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 1: Noop due to uninitialized mode. [drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid0:i9xx_update_wm] FIFO watermarks - A: 40, B: 40 [drm:KMS:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1 [drm:pid0:drm_vblank_get] enabling vblank on crtc 1, ret: -22 [drm:KMS:pid0:i9xx_crtc_mode_set] Mode for pipe B: [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 8:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa [drm:KMS:pid0:i9xx_update_plane] Writing base 00020000 00000000 0 0 4096 [drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid0:i9xx_update_wm] FIFO watermarks - A: 40, B: 40 [drm:KMS:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1 [drm:KMS:pid0:intel_crtc_mode_set] [ENCODER:6:LVDS-6] set [MODE:8:1024x768] [drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid0:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid0:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid0:i9xx_update_wm] FIFO watermarks - A: 40, B: 1 [drm:KMS:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1 [drm:KMS:pid0:intel_enable_lvds] applying panel-fitter: 8, 0 warning: [drm] fixme: max PWM is zero [drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 1 [drm:pid0:drm_calc_timestamping_constants] crtc 4: hwmode: htotal 1344, vtotal 806, vdisplay 768 [drm:pid0:drm_calc_timestamping_constants] crtc 4: clock 65000 kHz framedur 16664856 linedur 20676, pixeldur 15 [drm:KMS:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid0:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid0:output_poll_execute] [CONNECTOR:11:VGA-1] status updated from 2 to 2 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid0:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid0:output_poll_execute] [CONNECTOR:11:VGA-1] status updated from 2 to 2 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid0:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid0:output_poll_execute] [CONNECTOR:11:VGA-1] status updated from 2 to 2 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid0:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid0:output_poll_execute] [CONNECTOR:11:VGA-1] status updated from 2 to 2 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid0:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid0:output_poll_execute] [CONNECTOR:11:VGA-1] status updated from 2 to 2 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid0:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid0:output_poll_execute] [CONNECTOR:11:VGA-1] status updated from 2 to 2 [drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [NOFB] [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:KMS:pid0:intel_crtc_set_config] [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid853:drm_open_helper] pid = 853, device = dri/card0 [drm:KMS:pid853:i915_driver_open] [drm:pid853:drm_setup] [drm:pid853:drm_ioctl] pid=853, cmd=0xc0246400, nr=0x00, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0246400, nr=0x00, dev 0xc5bf5500, auth=1 [drm:pid853:drm_release] open_count = 1 [drm:pid853:drm_release] pid = 853, device = 0xc5bf5500, open_count = 1 [drm:pid853:drm_lastclose] [drm:KMS:pid853:intel_crtc_set_config] [CRTC:3] [NOFB] [drm:KMS:pid853:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:KMS:pid853:intel_crtc_set_config] [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [drm:KMS:pid853:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid853:drm_lastclose] driver lastclose completed [drm:pid853:drm_lastclose] lastclose completed [drm:pid853:drm_open_helper] pid = 853, device = dri/card0 [drm:KMS:pid853:i915_driver_open] [drm:pid853:drm_setup] [drm:pid853:drm_ioctl] pid=853, cmd=0xc0106407, nr=0x07, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086401, nr=0x01, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086401, nr=0x01, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0246400, nr=0x00, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064a0, nr=0xa0, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2] [drm:pid853:drm_release] open_count = 1 [drm:pid853:drm_release] pid = 853, device = 0xc5bf5500, open_count = 1 [drm:pid853:drm_lastclose] [drm:KMS:pid853:intel_crtc_set_config] [CRTC:3] [NOFB] [drm:KMS:pid853:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:KMS:pid853:intel_crtc_set_config] [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [drm:KMS:pid853:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid853:drm_lastclose] driver lastclose completed [drm:pid853:drm_lastclose] lastclose completed [drm:pid853:drm_open_helper] pid = 853, device = dri/card0 [drm:KMS:pid853:i915_driver_open] [drm:pid853:drm_setup] [drm:pid853:drm_ioctl] pid=853, cmd=0xc0246400, nr=0x00, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0246400, nr=0x00, dev 0xc5bf5500, auth=1 [drm:pid853:drm_release] open_count = 1 [drm:pid853:drm_release] pid = 853, device = 0xc5bf5500, open_count = 1 [drm:pid853:drm_lastclose] [drm:KMS:pid853:intel_crtc_set_config] [CRTC:3] [NOFB] [drm:KMS:pid853:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:KMS:pid853:intel_crtc_set_config] [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [drm:KMS:pid853:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:pid853:drm_lastclose] driver lastclose completed [drm:pid853:drm_lastclose] lastclose completed [drm:pid853:drm_open_helper] pid = 853, device = dri/card0 [drm:KMS:pid853:i915_driver_open] [drm:pid853:drm_setup] [drm:pid853:drm_ioctl] pid=853, cmd=0xc0106407, nr=0x07, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086401, nr=0x01, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086401, nr=0x01, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0106407, nr=0x07, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc010640c, nr=0x0c, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0x40106463, nr=0x63, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0186473, nr=0x73, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] ret = -22 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:i915_getparam] Unknown parameter 22 [drm:pid853:drm_ioctl] ret = -22 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0x20006458, nr=0x58, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064a0, nr=0xa0, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2] [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064a0, nr=0xa0, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2] [drm:pid853:drm_ioctl] pid=853, cmd=0xc06864a1, nr=0xa1, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086465, nr=0x65, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc010645b, nr=0x5b, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc06864a1, nr=0xa1, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086465, nr=0x65, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc010645b, nr=0x5b, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04c64a7, nr=0xa7, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid853:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid853:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid853:drm_mode_debug_printmodeline] Modeline 13:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa [drm:pid853:drm_ioctl] pid=853, cmd=0xc04c64a7, nr=0xa7, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:drm_mode_getconnector] [CONNECTOR:5:?] [drm:pid853:drm_ioctl] pid=853, cmd=0xc01464a6, nr=0xa6, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04c64a7, nr=0xa7, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:drm_mode_getconnector] [CONNECTOR:11:?] [drm:KMS:pid853:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid853:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid853:intel_get_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_get_load_detect_pipe] reusing fbdev for load-detection framebuffer [drm:KMS:pid853:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:KMS:pid853:intel_modeset_adjusted_mode] [CRTC:3] [drm:pid853:drm_vblank_get] enabling vblank on crtc 0, ret: -22 [drm:KMS:pid853:i9xx_crtc_mode_set] Mode for pipe A: [drm:KMS:pid853:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa [drm:KMS:pid853:i9xx_update_plane] Writing base 00020000 00000000 0 0 4096 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid853:i9xx_update_wm] FIFO watermarks - A: 40, B: 1 [drm:KMS:pid853:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1 [drm:KMS:pid853:intel_crtc_mode_set] [ENCODER:12:DAC-12] set [MODE:0:640x480] [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 20 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: 20 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid853:i9xx_update_wm] FIFO watermarks - A: 20, B: 1 [drm:KMS:pid853:i9xx_update_wm] Setting FIFO watermarks - A: 20, B: 1, C: 2, SR 1 [drm:pid853:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 832, vtotal 520, vdisplay 480 [drm:pid853:drm_calc_timestamping_constants] crtc 3: clock 31500 kHz framedur 13734240 linedur 26412, pixeldur 31 [drm:KMS:pid853:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid853:intel_connector_check_state] [CONNECTOR:11:VGA-1] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid853:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid853:intel_crt_load_detect] starting load-detect on CRT [drm:KMS:pid853:intel_release_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_set_mode] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [drm:pid853:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 5 p(0,0)@ 514.431893 -> 514.431893 [e 0 us, 0 rep] [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid853:i9xx_update_wm] FIFO watermarks - A: 40, B: 1 [drm:KMS:pid853:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1 [drm:KMS:pid853:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid853:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] disconnected [drm:pid853:drm_ioctl] pid=853, cmd=0xc04c64a7, nr=0xa7, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:drm_mode_getconnector] [CONNECTOR:11:?] [drm:KMS:pid853:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid853:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid853:intel_get_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_get_load_detect_pipe] reusing fbdev for load-detection framebuffer [drm:KMS:pid853:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:KMS:pid853:intel_modeset_adjusted_mode] [CRTC:3] [drm:pid853:drm_vblank_get] enabling vblank on crtc 0, ret: -22 [drm:KMS:pid853:i9xx_crtc_mode_set] Mode for pipe A: [drm:KMS:pid853:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa [drm:KMS:pid853:i9xx_update_plane] Writing base 00020000 00000000 0 0 4096 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid853:i9xx_update_wm] FIFO watermarks - A: 40, B: 1 [drm:KMS:pid853:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1 [drm:KMS:pid853:intel_crtc_mode_set] [ENCODER:12:DAC-12] set [MODE:0:640x480] [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 20 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: 20 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid853:i9xx_update_wm] FIFO watermarks - A: 20, B: 1 [drm:KMS:pid853:i9xx_update_wm] Setting FIFO watermarks - A: 20, B: 1, C: 2, SR 1 [drm:pid853:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 832, vtotal 520, vdisplay 480 [drm:pid853:drm_calc_timestamping_constants] crtc 3: clock 31500 kHz framedur 13734240 linedur 26412, pixeldur 31 [drm:KMS:pid853:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid853:intel_connector_check_state] [CONNECTOR:11:VGA-1] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid853:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid853:intel_crt_load_detect] starting load-detect on CRT [drm:KMS:pid853:intel_release_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_set_mode] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [drm:pid853:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 5 p(0,0)@ 514.542893 -> 514.542893 [e 0 us, 0 rep] [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid853:i9xx_update_wm] FIFO watermarks - A: 40, B: 1 [drm:KMS:pid853:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1 [drm:KMS:pid853:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid853:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] disconnected [drm:pid853:drm_ioctl] pid=853, cmd=0xc01464a6, nr=0xa6, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04c64a7, nr=0xa7, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid853:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid853:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid853:drm_mode_debug_printmodeline] Modeline 13:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa [drm:pid853:drm_ioctl] pid=853, cmd=0xc04c64a7, nr=0xa7, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:drm_mode_getconnector] [CONNECTOR:5:?] [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc01064ac, nr=0xac, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc01064ac, nr=0xac, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04c64a7, nr=0xa7, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:drm_mode_getconnector] [CONNECTOR:11:?] [drm:KMS:pid853:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid853:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid853:intel_get_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_get_load_detect_pipe] reusing fbdev for load-detection framebuffer [drm:KMS:pid853:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:KMS:pid853:intel_modeset_adjusted_mode] [CRTC:3] [drm:pid853:drm_vblank_get] enabling vblank on crtc 0, ret: -22 [drm:KMS:pid853:i9xx_crtc_mode_set] Mode for pipe A: [drm:KMS:pid853:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa [drm:KMS:pid853:i9xx_update_plane] Writing base 00020000 00000000 0 0 4096 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid853:i9xx_update_wm] FIFO watermarks - A: 40, B: 1 [drm:KMS:pid853:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1 [drm:KMS:pid853:intel_crtc_mode_set] [ENCODER:12:DAC-12] set [MODE:0:640x480] [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 20 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: 20 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid853:i9xx_update_wm] FIFO watermarks - A: 20, B: 1 [drm:KMS:pid853:i9xx_update_wm] Setting FIFO watermarks - A: 20, B: 1, C: 2, SR 1 [drm:pid853:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 832, vtotal 520, vdisplay 480 [drm:pid853:drm_calc_timestamping_constants] crtc 3: clock 31500 kHz framedur 13734240 linedur 26412, pixeldur 31 [drm:KMS:pid853:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid853:intel_connector_check_state] [CONNECTOR:11:VGA-1] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid853:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid853:intel_crt_load_detect] starting load-detect on CRT [drm:KMS:pid853:intel_release_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_set_mode] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [drm:pid853:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 5 p(0,0)@ 514.674969 -> 514.674969 [e 0 us, 0 rep] [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid853:i9xx_update_wm] FIFO watermarks - A: 40, B: 1 [drm:KMS:pid853:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1 [drm:KMS:pid853:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid853:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] disconnected [drm:pid853:drm_ioctl] pid=853, cmd=0xc04c64a7, nr=0xa7, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:drm_mode_getconnector] [CONNECTOR:11:?] [drm:KMS:pid853:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid853:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid853:intel_get_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_get_load_detect_pipe] reusing fbdev for load-detection framebuffer [drm:KMS:pid853:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:KMS:pid853:intel_modeset_adjusted_mode] [CRTC:3] [drm:pid853:drm_vblank_get] enabling vblank on crtc 0, ret: -22 [drm:KMS:pid853:i9xx_crtc_mode_set] Mode for pipe A: [drm:KMS:pid853:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa [drm:KMS:pid853:i9xx_update_plane] Writing base 00020000 00000000 0 0 4096 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid853:i9xx_update_wm] FIFO watermarks - A: 40, B: 1 [drm:KMS:pid853:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1 [drm:KMS:pid853:intel_crtc_mode_set] [ENCODER:12:DAC-12] set [MODE:0:640x480] [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 20 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: 20 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid853:i9xx_update_wm] FIFO watermarks - A: 20, B: 1 [drm:KMS:pid853:i9xx_update_wm] Setting FIFO watermarks - A: 20, B: 1, C: 2, SR 1 [drm:pid853:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 832, vtotal 520, vdisplay 480 [drm:pid853:drm_calc_timestamping_constants] crtc 3: clock 31500 kHz framedur 13734240 linedur 26412, pixeldur 31 [drm:KMS:pid853:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid853:intel_connector_check_state] [CONNECTOR:11:VGA-1] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid853:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid853:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid853:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid853:intel_crt_load_detect] starting load-detect on CRT [drm:KMS:pid853:intel_release_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_set_mode] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [drm:pid853:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 5 p(0,0)@ 514.775530 -> 514.775530 [e 0 us, 0 rep] [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid853:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid853:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid853:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid853:i9xx_update_wm] FIFO watermarks - A: 40, B: 1 [drm:KMS:pid853:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1 [drm:KMS:pid853:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid853:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid853:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid853:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] disconnected [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc010645b, nr=0x5b, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0106461, nr=0x61, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc010645b, nr=0x5b, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc010645b, nr=0x5b, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc010645b, nr=0x5b, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc01064ab, nr=0xab, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc04064aa, nr=0xaa, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc0086446, nr=0x46, dev 0xc5bf5500, auth=1 [drm:pid853:drm_ioctl] pid=853, cmd=0xc02c6468, nr=0x68, dev 0xc5bf5500, auth=1 [drm:KMS:pid853:intel_crtc_set_config] [CRTC:3] [NOFB] [drm:KMS:pid853:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:KMS:pid853:intel_crtc_set_config] [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [drm:KMS:pid853:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] panic: _sx_xlock_hard: recursed on non-recursive sx kmslk @ /usr/home/myuser/freebsd-base-graphics/sys/modules/drm2/i915kms/../../../dev/drm2/i915/intel_overlay.c:1318 cpuid = 0 KDB: stack backtrace: db_trace_self_wrapper(c1545960,662f6964,62656572,622d6473,2d657361,...) at db_trace_self_wrapper+0x2a/frame 0xda2d48e0 kdb_backtrace(c171800b,0,c1541882,da2d49ac,0,...) at kdb_backtrace+0x2d/frame 0xda2d4948 vpanic(c1541882,da2d49ac,c1541882,da2d49ac,da2d49ac,...) at vpanic+0x117/frame 0xda2d497c kassert_panic(c1541882,c5cdffb7,c5c962ea,526,53e019c5,...) at kassert_panic+0xe9/frame 0xda2d49a0 _sx_xlock_hard(c58e6a10,c5bd4680,0,c5c962ea,526,...) at _sx_xlock_hard+0x76f/frame 0xda2d4a40 _sx_xlock(c58e6a10,0,c5c962ea,526,c58e6800,...) at _sx_xlock+0xe1/frame 0xda2d4a70 intel_overlay_attrs(c58e6800,da2d4b80,c5228200,355,c02c6468,...) at intel_overlay_attrs+0x1c7/frame 0xda2d4aa4 drm_ioctl(c5bf5500,c02c6468,da2d4b80,3,c5bd4680,...) at drm_ioctl+0x281/frame 0xda2d4ae4 devfs_ioctl_f(c597f460,c02c6468,da2d4b80,c5bf6000,c5bd4680,...) at devfs_ioctl_f+0x121/frame 0xda2d4b1c kern_ioctl(c5bd4680,7,c02c6468,da2d4b80,da2d4bc4,...) at kern_ioctl+0x2dc/frame 0xda2d4b58 sys_ioctl(c5bd4680,da2d4ca8,c1538a7e,4,c1a497d4,...) at sys_ioctl+0x11b/frame 0xda2d4c18 syscall(da2d4ce8) at syscall+0x3b5/frame 0xda2d4cdc Xint0x80_syscall() at Xint0x80_syscall+0x2c/frame 0xda2d4cdc --- syscall (54, FreeBSD ELF32, sys_ioctl), eip = 0x2865283f, esp = 0xbfbfea34, ebp = 0xbfbfea50 --- Uptime: 8m35s Physical memory: 466 MB Dumping 80 MB: 65 49 33 17 1 ------------------------------------------------------------------------ kernel config options CONFIG_AUTOGENERATED ident GENERIC machine i386 cpu I686_CPU cpu I586_CPU cpu I486_CPU makeoptions WITH_CTF=1 makeoptions DEBUG=-g options XENHVM options HYPERV options USB_DEBUG options ATH_ENABLE_11N options AH_AR5416_INTERRUPT_MITIGATION options AH_SUPPORT_AR5416 options IEEE80211_SUPPORT_MESH options IEEE80211_AMPDU_AGE options IEEE80211_DEBUG options SC_PIXEL_MODE options VESA options AHD_REG_PRETTY_PRINT options AHC_REG_PRETTY_PRINT options ATA_STATIC_ID options PCI_IOV options SMP options MALLOC_DEBUG_MAXZONES=8 options WITNESS_SKIPSPIN options WITNESS options INVARIANT_SUPPORT options INVARIANTS options DEADLKRES options GDB options DDB options KDB_TRACE options KDB options RCTL options RACCT_DEFAULT_TO_DISABLED options RACCT options INCLUDE_CONFIG_FILE options DDB_CTF options KDTRACE_HOOKS options MAC options CAPABILITIES options CAPABILITY_MODE options AUDIT options HWPMC_HOOKS options KBD_INSTALL_CDEV options PRINTF_BUFR_SIZE=128 options _KPOSIX_PRIORITY_SCHEDULING options SYSVSEM options SYSVMSG options SYSVSHM options STACK options KTRACE options SCSI_DELAY=5000 options COMPAT_FREEBSD10 options COMPAT_FREEBSD9 options COMPAT_FREEBSD7 options COMPAT_FREEBSD6 options COMPAT_FREEBSD5 options COMPAT_FREEBSD4 options GEOM_LABEL options GEOM_RAID options GEOM_PART_GPT options PSEUDOFS options PROCFS options CD9660 options MSDOSFS options NFS_ROOT options NFSLOCKD options NFSD options NFSCL options MD_ROOT options QUOTA options UFS_GJOURNAL options UFS_DIRHASH options UFS_ACL options SOFTUPDATES options FFS options SCTP options TCP_OFFLOAD options IPSEC options INET6 options INET options PREEMPTION options SCHED_ULE options NEW_PCIB options GEOM_PART_MBR options GEOM_PART_EBR_COMPAT options GEOM_PART_EBR options GEOM_PART_BSD options ISAPNP device isa device npx device mem device io device uart_ns8250 device atpic device apic device cpufreq device acpi device pci device fdc device ahci device ata device mvs device siis device ahc device ahd device esp device hptiop device isp device mpt device mps device mpr device sym device trm device adv device adw device aha device aic device bt device ncv device nsp device stg device isci device scbus device ch device da device sa device cd device pass device ses device amr device arcmsr device ciss device dpt device hptmv device hptnr device hptrr device hpt27xx device iir device ips device mly device twa device tws device aac device aacp device aacraid device ida device mfi device mlx device mrsas device pmspcv device pst device twe device nvme device nvd device atkbdc device atkbd device psm device kbdmux device vga device splash device sc device vt device vt_vga device agp device pmtimer device cbb device pccard device cardbus device uart device ppc device ppbus device lpt device ppi device puc device bxe device de device em device igb device ixgb device le device ti device txp device vx device miibus device ae device age device alc device ale device bce device bfe device bge device cas device dc device et device fxp device gem device hme device jme device lge device msk device nfe device nge device pcn device re device rl device sf device sge device sis device sk device ste device stge device tl device tx device vge device vr device vte device wb device xl device cs device ed device ex device ep device fe device ie device sn device xe device wlan device wlan_wep device wlan_ccmp device wlan_tkip device wlan_amrr device an device ath device ath_pci device ath_hal device ath_rate_sample device ipw device iwi device iwn device malo device mwl device ral device wi device wpi device loop device random device padlock_rng device rdrand_rng device ether device vlan device tun device md device gif device firmware device bpf device uhci device ohci device ehci device xhci device usb device ukbd device umass device sound device snd_cmi device snd_csa device snd_emu10kx device snd_es137x device snd_hda device snd_ich device snd_via8233 device mmc device mmcsd device sdhci device virtio device virtio_pci device vtnet device virtio_blk device virtio_scsi device virtio_balloon device hyperv device xenpci device vmx device crypto ------------------------------------------------------------------------ ddb capture buffer [-- Attachment #3 --] Copyright (c) 1992-2015 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-CURRENT #0 3820047(drm-i915-update-38): Sat Oct 17 20:09:30 CEST 2015 root@marnie.dom.braml.org:/usr/obj/usr/home/andi/freebsd-base-graphics/sys/GENERIC i386 FreeBSD clang version 3.6.1 (tags/RELEASE_361/final 237755) 20150525 WARNING: WITNESS option enabled, expect reduced performance. VT(vga): resolution 640x480 CPU: Intel(R) Pentium(R) M processor 1500MHz (1499.86-MHz 686-class CPU) Origin="GenuineIntel" Id=0x695 Family=0x6 Model=0x9 Stepping=5 Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> Features2=0x180<EST,TM2> real memory = 536870912 (512 MB) avail memory = 473137152 (451 MB) random: unblocking device. random: entropy device external interface kbd1 at kbdmux0 module_register_init: MOD_LOAD (vesa, 0xc10d6860, 0) error 19 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <PTLTD Montara> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xe8000000-0xefffffff,0xe0000000-0xe007ffff irq 11 at device 2.0 on pci0 agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> on vgapci0 agp0: aperture size is 128M, detected 16252k stolen memory vgapci0: Boot video device vgapci1: <VGA-compatible display> mem 0xf0000000-0xf7ffffff,0xe0080000-0xe00fffff at device 2.1 on pci0 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 10 at device 29.2 on pci0 usbus2 on uhci2 ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe0100000-0xe01003ff irq 11 at device 29.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ipw0: <Intel(R) PRO/Wireless 2100 MiniPCI> mem 0xe0200000-0xe0200fff irq 10 at device 1.0 on pci1 cbb0: <RF5C476 PCI-CardBus Bridge> irq 11 at device 3.0 on pci1 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <RF5C476 PCI-CardBus Bridge> irq 10 at device 3.1 on pci1 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci1: <serial bus, FireWire> at device 3.2 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem 0xe0201800-0xe02018ff irq 10 at device 5.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:40:ca:c4:40:84 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 0xe0100c00-0xe0100dff,0xe0100800-0xe01008ff irq 10 at device 31.5 on pci0 pcm0: <Avance Logic ALC202 AC97 Codec> acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xcd7ff,0xdb800-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0 ppc0: parallel port not found. est0: <Enhanced SpeedStep Frequency Control> on cpu0 est0: current setting not found in table Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 usbus3: 480Mbps High Speed USB v2.0 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ata1: timeout waiting for read DRQ (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ata1:0:1:0): CAM status: CCB request completed with an error (aprobe0:ata1:0:1:0): Retrying command uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe0:ata1:0:1:0): CAM status: Command timeout (aprobe0:ata1:0:1:0): Error 5, Retries exhausted ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <IC25N040ATMR04-0 MO2OAD4A> ATA-6 device ada0: Serial Number MRG277KBG0X8RH ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) ada0: 38154MB (78140160 512 byte sectors: 16H 63S/T 16383C) ata1: timeout waiting for read DRQ (aprobe1:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe1:ata1:0:1:0): CAM status: CCB request completed with an error (aprobe1:ata1:0:1:0): Retrying command ata1: timeout waiting for read DRQ (aprobe1:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00 (aprobe1:ata1:0:1:0): CAM status: CCB request completed with an error (aprobe1:ata1:0:1:0): Error 5, Retries exhausted ada0: Previously was known as ad0 Timecounter "TSC" frequency 1499861754 Hz quality 800 WARNING: WITNESS option enabled, expect reduced performance. cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: <QSI DVD+-RW SDW-082 LX32> Removable CD-ROM SCSI device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ada0p2 [rw]... WARNING: / was not properly dismounted rl0: link state changed to UP tun0: link state changed to UP WARNING: attempt to domain_add(netgraph) after domainfinalize() rl0: link state changed to DOWN lock order reversal: 1st 0xc4adfd20 bufwait (bufwait) @ /usr/home/andi/freebsd-base-graphics/sys/kern/vfs_bio.c:3344 2nd 0xc58f0a00 dirhash (dirhash) @ /usr/home/andi/freebsd-base-graphics/sys/ufs/ufs/ufs_dirhash.c:281 KDB: stack backtrace: db_trace_self_wrapper(c1545960,7379732f,7366752f,7366752f,7366752f,...) at db_trace_self_wrapper+0x2a/frame 0xda282720 kdb_backtrace(c154977c,c58f0a00,c1584a0a,c4da8fa8,c1584639,...) at kdb_backtrace+0x2d/frame 0xda282788 witness_checkorder(c58f0a00,9,c1584639,119,0,...) at witness_checkorder+0xd6e/frame 0xda2827dc _sx_xlock(c58f0a00,0,c1584639,119,0,...) at _sx_xlock+0x74/frame 0xda28280c ufsdirhash_add(c5b228e8,da282958,55b4,da282898,da28289c,...) at ufsdirhash_add+0x37/frame 0xda282840 ufs_direnter(c5b27d50,c5b279fc,da282958,da282b3c,c4ae05ac,...) at ufs_direnter+0x654/frame 0xda2828c8 ufs_mkdir(da282bd8,c1801ffc,c5b27d50,da282bd4,10,...) at ufs_mkdir+0x7ec/frame 0xda282a74 VOP_MKDIR_APV(c17ed810,da282bd8,da282b3c,da282b68,28412000,...) at VOP_MKDIR_APV+0xfe/frame 0xda282aa0 kern_mkdirat(c55279c0,ffffff9c,28412000,0,1c0) at kern_mkdirat+0x23a/frame 0xda282bfc sys_mkdir(c55279c0,da282ca8,c1538a7e,4,c1a497d4,...) at sys_mkdir+0x31/frame 0xda282c18 syscall(da282ce8) at syscall+0x3b5/frame 0xda282cdc Xint0x80_syscall() at Xint0x80_syscall+0x2c/frame 0xda282cdc --- syscall (136, FreeBSD ELF32, sys_mkdir), eip = 0x28198867, esp = 0xbfbfe924, ebp = 0xbfbfedd0 --- rl0: link state changed to UP ng_pppoe[3]: no matching session ng_pppoe[3]: no matching session ng_pppoe[3]: no matching session ng_pppoe[3]: no matching session ng_pppoe[3]: no matching session ng_pppoe[3]: no matching session info: [drm] Initialized drm 1.1.0 20060810 [drm:pid822:drm_probe_helper] drmn0 desc: Intel i852GM/i855GM GMCH drmn0: <Intel i852GM/i855GM GMCH> on vgapci0 [drm:pid822:drm_get_pci_dev] [drm:pid822:drm_ctxbitmap_next] bit : 0 [drm:pid822:drm_ctxbitmap_init] drm_ctxbitmap_init : 0 [drm:pid822:drm_get_minor] [drm:pid822:drm_get_minor] new minor assigned 64 [drm:pid822:drm_get_minor] [drm:pid822:drm_get_minor] new minor assigned 0 [drm:KMS:pid822:i915_dump_device_info] i915 device info: gen=2, pciid=0x3582 flags=is_mobile,is_i85x,cursor_needs_physical,has_overlay,overlay_needs_physical,[drm:pid822:drm_addmap_core] offset = 0xe0000000, size = 0x00080000, type = 1 iicbus0: <Philips I2C bus> on iicbb0 addr 0xda iic0: <I2C generic I/O> on iicbus0 iic1: <I2C generic I/O> on iicbus1 iicbus2: <Philips I2C bus> on iicbb1 addr 0xda iic2: <I2C generic I/O> on iicbus2 iic3: <I2C generic I/O> on iicbus3 iicbus4: <Philips I2C bus> on iicbb2 addr 0xda iic4: <I2C generic I/O> on iicbus4 iic5: <I2C generic I/O> on iicbus5 iicbus6: <Philips I2C bus> on iicbb3 addr 0xda iic6: <I2C generic I/O> on iicbus6 iic7: <I2C generic I/O> on iicbus7 iicbus8: <Philips I2C bus> on iicbb4 addr 0xda iic8: <I2C generic I/O> on iicbus8 iic9: <I2C generic I/O> on iicbus9 iicbus10: <Philips I2C bus> on iicbb5 addr 0xda iic10: <I2C generic I/O> on iicbus10 iic11: <I2C generic I/O> on iicbus11 [drm:pid822:intel_opregion_setup] graphic opregion physical addr: 0x0 [drm:pid822:intel_opregion_setup] ACPI OpRegion not supported! [drm:pid822:drm_pci_enable_msi] MSI count = 0 info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. [drm:KMS:pid822:init_vbt_defaults] Set default to SSC at 66MHz [drm:KMS:pid822:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 48 display_clock_mode 0 fdi_rx_polarity_inverted 0 [drm:KMS:pid822:parse_general_definitions] crt_ddc_bus_pin: 2 [drm:KMS:pid822:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [drm:KMS:pid822:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa [drm:KMS:pid822:parse_lfp_panel_data] VBT initial LVDS value 40000300 [drm:KMS:pid822:parse_sdvo_device_mapping] different child size is found. Invalid. [drm:KMS:pid822:parse_device_mapping] different child size is found. Invalid. [drm:KMS:pid822:intel_modeset_init] 2 display pipes available. [drm:KMS:pid822:intel_modeset_init] plane 0 init failed: -19 [drm:KMS:pid822:intel_modeset_init] plane 1 init failed: -19 [drm:KMS:pid822:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation [drm:KMS:pid822:intel_lvds_init] using preferred mode from EDID: [drm:KMS:pid822:drm_mode_debug_printmodeline] Modeline 8:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa [drm:KMS:pid822:intel_panel_get_backlight] get backlight PWM = 0 [drm:KMS:pid822:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395955 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0038 r(1) [drm:KMS:pid822:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395956 [drm:KMS:pid822:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395955 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0076 r(1) [drm:KMS:pid822:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395956 [drm:KMS:pid822:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -984386803 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus ssc] NAK for addr: 0002 r(0) [drm:KMS:pid822:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -984386804 [drm:KMS:pid822:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395955 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0038 r(1) [drm:KMS:pid822:tfp410_init] tfp410 not detected got VID FFFFFFFF: from iicbus9 Slave 56. [drm:KMS:pid822:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395956 [drm:KMS:pid822:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395955 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0075 r(1) [drm:KMS:pid822:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395956 [drm:KMS:pid822:intel_gmbus_force_bit] enabling bit-banging on Philips I2C bus. force bit now -985395955 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0038 r(1) [drm:KMS:pid822:intel_gmbus_force_bit] disabling bit-banging on Philips I2C bus. force bit now -985395956 drmn0: taking over the fictitious range 0xe8000000-0xf0000000 info: [drm] initialized overlay support [drm:KMS:pid822:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: enabled [drm:KMS:pid822:intel_modeset_setup_hw_state] [CRTC:4] hw state readout: enabled [drm:KMS:pid822:intel_modeset_setup_hw_state] [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=1 [drm:KMS:pid822:intel_modeset_setup_hw_state] [ENCODER:12:DAC-12] hw state readout: disabled, pipe=0 [drm:KMS:pid822:intel_modeset_setup_hw_state] [CONNECTOR:5:LVDS-1] hw state readout: enabled [drm:KMS:pid822:intel_modeset_setup_hw_state] [CONNECTOR:11:VGA-1] hw state readout: disabled [drm:pid822:drm_calc_vbltimestamp_from_scanoutpos] crtc 0: Noop due to uninitialized mode. [drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid822:i9xx_update_wm] FIFO watermarks - A: 40, B: 40 [drm:KMS:pid822:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1 [drm:KMS:pid822:intel_sanitize_crtc] [CRTC:3] hw state adjusted, was enabled, now disabled [drm:KMS:pid822:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid822:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid822:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid822:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid822:intel_modeset_check_state] [CRTC:4] [drm:pid822:drm_irq_install] irq=11 info: [drm] Connector LVDS-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.LVDS-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector VGA-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.VGA-1 info: [drm] - kern.vt.fb.default_mode [drm:KMS:pid822:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid822:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid822:drm_mode_debug_printmodeline] Modeline 13:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa [drm:KMS:pid822:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid822:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid822:intel_get_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12] [drm:KMS:pid822:intel_get_load_detect_pipe] creating tmp fb for load-detection [drm:KMS:pid822:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [drm:KMS:pid822:intel_modeset_adjusted_mode] [CRTC:3] [drm:pid822:drm_vblank_get] enabling vblank on crtc 0, ret: -22 [drm:KMS:pid822:i9xx_crtc_mode_set] Mode for pipe A: [drm:KMS:pid822:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa [drm:KMS:pid822:i9xx_update_plane] Writing base 00020000 00000000 0 0 2560 [drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid822:i9xx_update_wm] FIFO watermarks - A: 40, B: 40 [drm:KMS:pid822:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1 [drm:KMS:pid822:intel_crtc_mode_set] [ENCODER:12:DAC-12] set [MODE:0:640x480] [drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid822:intel_calculate_wm] FIFO entries required for mode: 20 [drm:KMS:pid822:intel_calculate_wm] FIFO watermark level: 20 [drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid822:i9xx_update_wm] FIFO watermarks - A: 20, B: 40 [drm:KMS:pid822:i9xx_update_wm] Setting FIFO watermarks - A: 20, B: 40, C: 2, SR 1 [drm:pid822:drm_calc_timestamping_constants] crtc 3: hwmode: htotal 832, vtotal 520, vdisplay 480 [drm:pid822:drm_calc_timestamping_constants] crtc 3: clock 31500 kHz framedur 13734240 linedur 26412, pixeldur 31 [drm:KMS:pid822:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid822:intel_connector_check_state] [CONNECTOR:11:VGA-1] [drm:KMS:pid822:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid822:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid822:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid822:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid822:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid822:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid822:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid822:intel_crt_load_detect] starting load-detect on CRT [drm:KMS:pid822:intel_release_load_detect_pipe] [CONNECTOR:11:VGA-1], [ENCODER:12:DAC-12] [drm:KMS:pid822:intel_set_mode] set mode pipe masks: modeset: 0, prepare: 0, disable: 1 [drm:pid822:drm_calc_vbltimestamp_from_scanoutpos] crtc 0 : v 5 p(0,0)@ 138.135841 -> 138.135841 [e 0 us, 0 rep] [drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid822:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid822:i9xx_update_wm] FIFO watermarks - A: 40, B: 40 [drm:KMS:pid822:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1 [drm:KMS:pid822:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid822:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid822:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid822:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid822:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid822:drm_helper_probe_single_connector_modes] [CONNECTOR:11:VGA-1] disconnected [drm:KMS:pid822:drm_setup_crtcs] [drm:KMS:pid822:drm_enable_connectors] connector 5 enabled? yes [drm:KMS:pid822:drm_enable_connectors] connector 11 enabled? no [drm:KMS:pid822:drm_target_preferred] looking for cmdline mode on connector 5 [drm:KMS:pid822:drm_target_preferred] looking for preferred mode on connector 5 [drm:KMS:pid822:drm_target_preferred] found mode 1024x768 [drm:KMS:pid822:drm_setup_crtcs] picking CRTCs for 2048x2048 config [drm:KMS:pid822:drm_setup_crtcs] desired mode 1024x768 set on crtc 4 [drm:KMS:pid822:intelfb_create] allocated 1024x768 (s 24bits) fb: 0x00020000, bo 0xc5225200 fbd0 on drmn0 VT: Replacing driver "vga" with new "fb". info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0 [drm:KMS:pid0:intel_crtc_set_config] [CRTC:3] [NOFB] [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:KMS:pid0:intel_crtc_set_config] [CRTC:4] [FB:14] #connectors=1 (x y) (0 0) [drm:KMS:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set [drm:KMS:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 8:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa [drm:KMS:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4] [drm:KMS:pid0:intel_crtc_set_config] attempting to set mode from userspace [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 8:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa [drm:KMS:pid0:intel_set_mode] set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [drm:KMS:pid0:intel_modeset_adjusted_mode] [CRTC:4] [drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0 [drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 1: Noop due to uninitialized mode. [drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid0:i9xx_update_wm] FIFO watermarks - A: 40, B: 40 [drm:KMS:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1 [drm:pid0:drm_vblank_get] enabling vblank on crtc 1, ret: -22 [drm:KMS:pid0:i9xx_crtc_mode_set] Mode for pipe B: [drm:KMS:pid0:drm_mode_debug_printmodeline] Modeline 8:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa [drm:KMS:pid0:i9xx_update_plane] Writing base 00020000 00000000 0 0 4096 [drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid0:i9xx_update_wm] FIFO watermarks - A: 40, B: 40 [drm:KMS:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 40, C: 2, SR 1 [drm:KMS:pid0:intel_crtc_mode_set] [ENCODER:6:LVDS-6] set [MODE:8:1024x768] [drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) A: 42 [drm:KMS:pid0:i85x_get_fifo_size] FIFO size - (0x00015455) B: 42 [drm:KMS:pid0:intel_calculate_wm] FIFO entries required for mode: 41 [drm:KMS:pid0:intel_calculate_wm] FIFO watermark level: -1 [drm:KMS:pid0:i9xx_update_wm] FIFO watermarks - A: 40, B: 1 [drm:KMS:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 40, B: 1, C: 2, SR 1 [drm:KMS:pid0:intel_enable_lvds] applying panel-fitter: 8, 0 warning: [drm] fixme: max PWM is zero [drm:KMS:pid0:intel_panel_actually_set_backlight] set backlight PWM = 1 [drm:pid0:drm_calc_timestamping_constants] crtc 4: hwmode: htotal 1344, vtotal 806, vdisplay 768 [drm:pid0:drm_calc_timestamping_constants] crtc 4: clock 65000 kHz framedur 16664856 linedur 20676, pixeldur 15 [drm:KMS:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6] [drm:KMS:pid0:intel_modeset_check_state] [ENCODER:12:DAC-12] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:3] [drm:KMS:pid0:intel_modeset_check_state] [CRTC:4] [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 6 [drm:KMS:pid0:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 6 [drm:KMS:pid0:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found] [drm:KMS:pid0:output_poll_execute] [CONNECTOR:11:VGA-1] status updated from 2 to 2 [-- Attachment #4 --] Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 # Screen 1 "Screen1" RightOf "Screen0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "ServerFlags" Option "AutoAddDevices" "off" EndSection Section "Files" ModulePath "/usr/local/lib/xorg/modules" FontPath "/usr/local/lib/X11/fonts/misc/" FontPath "/usr/local/lib/X11/fonts/TTF/" FontPath "/usr/local/lib/X11/fonts/OTF/" FontPath "/usr/local/lib/X11/fonts/Type1/" FontPath "/usr/local/lib/X11/fonts/100dpi/" FontPath "/usr/local/lib/X11/fonts/75dpi/" FontPath "/usr/local/lib/X11/fonts/dejavu/" EndSection Section "Module" Load "extmod" Load "record" Load "dbe" Load "dri" Load "dri2" Load "glx" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "de" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "AccelMethod" # <str> #Option "Backlight" # <str> #Option "DRI" # <str> #Option "ColorKey" # <i> #Option "VideoKey" # <i> #Option "Tiling" # [<bool>] #Option "LinearFramebuffer" # [<bool>] #Option "SwapbuffersWait" # [<bool>] #Option "TripleBuffer" # [<bool>] #Option "XvPreferOverlay" # [<bool>] #Option "HotPlug" # [<bool>] #Option "ReprobeOutputs" # [<bool>] #Option "XvMC" # [<bool>] #Option "ZaphodHeads" # <str> #Option "TearFree" # [<bool>] #Option "PerCrtcPixmaps" # [<bool>] #Option "FallbackDebug" # [<bool>] #Option "DebugFlushBatches" # [<bool>] #Option "DebugFlushCaches" # [<bool>] #Option "DebugWait" # [<bool>] #Option "BufferCache" # [<bool>] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "AccelMethod" # <str> #Option "Backlight" # <str> #Option "DRI" # <str> #Option "ColorKey" # <i> #Option "VideoKey" # <i> #Option "Tiling" # [<bool>] #Option "LinearFramebuffer" # [<bool>] #Option "SwapbuffersWait" # [<bool>] #Option "TripleBuffer" # [<bool>] #Option "XvPreferOverlay" # [<bool>] #Option "HotPlug" # [<bool>] #Option "ReprobeOutputs" # [<bool>] #Option "XvMC" # [<bool>] #Option "ZaphodHeads" # <str> #Option "TearFree" # [<bool>] #Option "PerCrtcPixmaps" # [<bool>] #Option "FallbackDebug" # [<bool>] #Option "DebugFlushBatches" # [<bool>] #Option "DebugFlushCaches" # [<bool>] #Option "DebugWait" # [<bool>] #Option "BufferCache" # [<bool>] Identifier "Card1" Driver "intel" BusID "PCI:0:2:1" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1913812716.186172.1445130478636.JavaMail.open-xchange>