Date: Fri, 7 Sep 2007 15:19:14 +0900 From: dikshie <dikshie@gmail.com> To: freebsd-hardware@freebsd.org Subject: how to debug ath ? Message-ID: <910e60e80709062319u4a4500b7p530d15ba2925e279@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
hi, any pointers how to debug ath device ? my ath device is very strange. with wpa auth my ath can only survice about 10 minutes after 10 minutes my notebook become hang, i have to push it out and insert again, run wpa_supplicant and dhclient again. BUT if I turn off wpa auth in my wireless access point and run dhclient diretly my ath card works normal. by the way, I'm on non-acpi mode because acpi currently broken in my notebook. (I'm using 7.0-current.) my ath: ------------------------ ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:0a:79:6b:4e:cf media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier ssid "" channel 1 (2412 Mhz 11b) authmode OPEN privacy OFF txpowmax 100 bmiss 7 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi11b 14 roam:rate11b 1 burst ------------------------ ath0@pci2:0:0: class=0x020000 card=0xc1141259 chip=0x001b168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'AR5006 family 802.11abg Wireless NIC' class = network subclass = ethernet ------------------------- ath0: <Atheros 5212> mem 0x88000000-0x8800ffff irq 11 at device 0.0 on cardbus0 ath0: [ITHREAD] ath0: using obsoleted if_watchdog interface ath0: Ethernet address: 00:0a:79:6b:4e:cf ath0: mac 10.5 phy 6.1 radio 6.3 -------------------------- my access point: corega wireless broadband access router (802.11a/b/g) regards, -- -dikshie-
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?910e60e80709062319u4a4500b7p530d15ba2925e279>