Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 19 Jan 2003 19:50:07 -0600 (CST)
From:      Kevin Day <toasty@dragondata.com>
To:        FreeBSD-gnats-submit@FreeBSD.org
Subject:   i386/47236: Console missing during bootup on Sony Picturebook in 5.0
Message-ID:  <200301200150.h0K1o7Hq057090@kevinday.com>

next in thread | raw e-mail | index | archive | help

>Number:         47236
>Category:       i386
>Synopsis:       Console missing during bootup on Sony Picturebook in 5.0
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sun Jan 19 18:00:18 PST 2003
>Closed-Date:
>Last-Modified:
>Originator:     Kevin Day
>Release:        FreeBSD 5.0-RELEASE i386
>Organization:
Your.org, Inc.
>Environment:
System: FreeBSD pb.kevinday.com 5.0-RELEASE FreeBSD 5.0-RELEASE #0: Sun Jan 19 09:51:33 CST 2003 root@pb.kevinday.com:/usr/src/sys/i386/compile/PB i386

Sony PCG-C1MZX subnotebook

Dmesg:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Sun Jan 19 09:51:33 CST 2003
    root@pb.kevinday.com:/usr/src/sys/i386/compile/PB
Preloaded elf kernel "/boot/kernel/kernel" at 0xc053f000.
Timecounter "i8254"  frequency 1193182 Hz
CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 (926.34-MHz 586-class CPU)
  Origin = "GenuineTMx86"  Id = 0x543
real memory  = 243269632 (232 MB)
avail memory = 230670336 (219 MB)
Initializing GEOMetry subsystem
acpi0: Other PM system enabled.
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 13 entries at 0xc00fdef0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pcm0: <Acer Labs M5451> port 0x1800-0x18ff mem 0xe8100000-0xe8100fff irq 9 at device 6.0 on pci0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms> at device 8.0 (no driver attached)
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xe8104000-0xe8107fff,0xe8102000-0xe81027ff irq 9 at device 9.0 on pci0
fwohci0: PCI bus latency was changing to 250.
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 08:00:46:03:00:de:4a:50
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0a:00:46:de:4a:50
sbp0: <SBP2/SCSI over firewire> on firewire0
pci0: <multimedia> at device 10.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x2400-0x24ff mem 0xe8102800-0xe81028ff irq 9 at device 11.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 08:00:46:47:6f:9d
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <display, VGA> at device 12.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xe8103000-0xe8103fff irq 9 at device 15.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: device problem, disabling port 1
atapci0: <AcerLabs Aladdin ATA100 controller> port 0x1400-0x140f,0x374-0x377,0x170-0x17f,0x3f4-0x3f7,0x1f0-0x1ff at device 16.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <old, non-VGA display device> at device 17.0 (no driver attached)
cbb0: <RF5C475 PCI-CardBus Bridge> at device 18.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr: 0:18 INTA routed to irq 9
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xe0000-0xe0fff irq 9 at device 20.0 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
umass0: PHILIPS USB Storage Device, rev 2.00/11.06, addr 2
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 1
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd0000-0xd27ff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
spic0: device model type = 2
spic0: <Sony Programmable I/O Controller> at port 0x10a0-0x10a4 on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 irq 1 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
unknown: <PNP0c02> can't assign resources (memory)
psmcpnp0: irq resource info is missing; assuming irq 12
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: cannot reserve I/O port range (1 ports)
Timecounters tick every 10.000 msec
DUMMYNET initialized (011031)
BRIDGE 020214 loaded
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled
fwohci0: BUS reset
fwohci0: node_id = 0xc000ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
wi0: <WaveLAN/IEEE> at port 0x100-0x13f irq 9 function 0 config 1 on pccard0
wi0: 802.11 address: 00:02:2d:65:d1:21
wi0: using Sony WaveLAN/IEEE
wi0: Lucent Firmware: Station 8.42.01
ad0: 57231MB <HITACHI_DK23EA-60> [116280/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s2a
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <IDE-CD JR/RW24 P1.1> Removable CD-ROM SCSI-0 device 
cd0: 1.000MB/s transfers
cd0: cd present [113086 x 2048 byte records]

Loaded as a module after boot completed:

drm0: <ATI Radeon LY Mobility 6 (AGP)> port 0x2800-0x28ff mem 0xe8110000-0xe811ffff,0xf0000000-0xf7ffffff irq 9 at device 12.0 on pci0
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0


Some of the devices that aren't getting detected, but are present include a
built in camera, TV tuner, bluetooth, and a MemoryStick slot.


>Description:

About 70% of the time when booting up, I don't get any console from after
the boot loader is finished until the login: prompt.

Note this isn't the same as kern/45574, I eventually do get a login prompt,
it sounds like he does not.

When it works/doesn't work, I don't see any difference in the dmesg output,
so that's not too useful, and I haven't found any kind of pattern as to why
it works sometimes. A GENERIC kernel also exhibits this behavior, and this
works fine in 4.7.

On a good note, accelerated XFree86 works great, even with the funky aspect
ratio of the monitor.


>How-To-Repeat:

>Fix:



>Release-Note:
>Audit-Trail:
>Unformatted:

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200301200150.h0K1o7Hq057090>