Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 2 Apr 2001 14:34:44 -0700 (PDT)
From:      Matthew Jacob <mjacob@feral.com>
To:        alpha@FreeBSD.ORG
Subject:   Funny Interrupt settings on AXPpci33 (fwd)
Message-ID:  <Pine.LNX.4.21.0104021434370.3303-100000@zeppo.feral.com>

next in thread | raw e-mail | index | archive | help

reposted to list


---------- Forwarded message ----------
Date: Mon, 2 Apr 2001 23:34:17 +0200
From: Bernd Walter <ticso@mail.cicely.de>
To: freebsd-current@FreeBSD.ORG
Subject: Funny Interrupt settings on AXPpci33

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Apr  2 19:33:20 CEST 2001
    ticso@cicely9.cicely.de:/var/d8/src-2001-03-28/src/sys/compile/CICELY10
DEC AXPpci
Alpha PC AXPpci33, 166MHz
8192 byte page size, 1 processor.
CPU: LCA Family major=4 minor=2
OSF PAL rev: 0x100090002012d
real memory  = 31481856 (30744K bytes)
avail memory = 24649728 (24072K bytes)
Preloaded elf kernel "kernel" at 0xfffffc000067a000.
lca0: <21066 Core Logic chipset>
pci0: <PCI bus> on pcib0
sym0: <810> port 0x10000-0x100ff mem 0x81040400-0x810404ff irq 0 at device 6.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at ISA irq 0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
dc0: <Intel 21143 10/100BaseTX> port 0x10180-0x101ff mem 0x81040000-0x810403ff irq 16 at device 11.0 on pci0
                                                                               ^^^^^^
dc0: couldn't map interrupt
device_probe_and_attach: dc0 attach returned 6
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x81040500-0x8104057f irq 185 at device 12.0 on pci0
                                                                             ^^^^^^^
de0: couldn't map interrupt
device_probe_and_attach: de0 attach returned 6
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
[...]

Here are the lines with an older kernel:
dc0: <Intel 21143 10/100BaseTX> port 0x10180-0x101ff mem 0x81040000-0x810403ff irq 5 at device 11.0 on pci0
dc0: interrupting at ISA irq 5
dc0: Ethernet address: 00:00:cb:56:2e:2a
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x81040500-0x8104057f irq 9 at device 12.0 on pci0
de0: interrupting at ISA irq 9
de0: Cogent 21040 [10Mb/s] pass 2.3
de0: address 00:00:92:90:7f:26

-- 
B.Walter              COSMO-Project         http://www.cosmo-project.de
ticso@cicely.de         Usergroup           info@cosmo-project.de


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0104021434370.3303-100000>