Date: Mon, 13 May 2002 17:14:40 +0200 From: John Angelmo <john@veidit.net> To: alan.edmonds@t-motion.net Cc: current@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG Subject: Re: Problem with Intel 2011b Message-ID: <3CDFD860.90609@veidit.net> References: <5D90F2332B50D411BE8A00209412104C0385090D@QHS63>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
alan.edmonds@t-motion.net wrote:
> I have used the non-B version with -current and an IBM thinkpad.
>
> What kind of laptop? dmesg output would be nice.
> Do any other cards work?
>
> Alan Edmonds
>
> -----Original Message-----
> From: John Angelmo [mailto:john@veidit.net]
> Sent: 13 May 2002 15:02
> To: current
> Cc: freebsd-mobile
> Subject: Problem with Intel 2011b
>
>
> Hello
>
> I just got my hands on a Intel 2011b Wireless card, I'm running FreeBSD
> current (dated just before gcc 3.1).
> Now my problem is that I insert the card and well nothing happens, the
> system gets locked, when I remove the card I everything starts working
> once again, and it says it can't manage card ("null"), ("null")
>
> Any one got any idea?
>
> mvh /John
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message
Well 2011b is a 32bit card (if I'm not mistaking) the 2011 card is the
same as the symbol card but the 2011b card uses 3.3v instead of 5v
So perhaps I need to use:
device pccbb # cardbus (yenta) bridge
device pccard
device cardbus
instead of:
device card # pccard bus
device pcic # PCMCIA bridge
What else can I do?
I use a C Series Lifebook from Fujitsu Siemens
/John
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Tue May 7 20:24:04 CEST 2002
root@Amnesiac:/usr/obj/usr/src/sys/Linn
Preloaded elf kernel "/boot/kernel/kernel" at 0xc047b000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc047b0a8.
Preloaded splash_image_data "/boot/darth_maul.bmp" at 0xc047b158.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc047b1ac.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc047b254.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 847178248 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (847.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 266797056 (260544K bytes)
avail memory = 254554112 (248588K bytes)
Pentium Pro MTRR support enabled
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc0369e80 (1000040)
VESA: Intel815M(TM) Graphics Chip Accelerated VGA BIOS
Using $PIR table, 6 entries at 0xc00fdf60
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 5 at device 2.0 on pci0
pcib1: <PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
pcic0: <O2micro 6933 PCI-Cardbus Bridge> mem 0xf4300000-0xf4300fff irq 5 at device 2.0 on pci1
pcic0: Warning: O2micro OZ68xx chips may not work
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <O2micro 6933 PCI-Cardbus Bridge> mem 0xf4301000-0xf4301fff irq 9 at device 2.1 on pci1
pcic1: Warning: O2micro OZ68xx chips may not work
pccard1: <PC Card bus (classic)> on pcic1
rl0: <RealTek 8139 10/100BaseTX> port 0xee00-0xeeff mem 0xf4302000-0xf43020ff irq 5 at device 6.0 on pci1
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:90:96:19:6b:b2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0x1800-0x180f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0x1820-0x183f irq 7 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0x1810-0x181f irq 9 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x1840-0x185f irq 10 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Mouse, rev 1.00/1.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
pcm0: <Intel 82801BA (ICH2)> port 0xff80-0xffbf,0xfc00-0xfcff irq 9 at device 31.5 on pci0
pcm0: measured ac97 link rate at 29473 Hz
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ACPI-1305: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI-1305: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI-1305: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ad0: 9590MB <TOSHIBA MK1016GAP> [19485/16/63] at ata0-master UDMA66
acd0: CDROM <QSI CD-ROM SCR-242> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
/: lost blocks 68 files 13
/: reload pending error: blocks 68 files 13
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CDFD860.90609>