From owner-freebsd-stable@FreeBSD.ORG Sat Mar 27 15:55:26 2004 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 943AC16A4CE for ; Sat, 27 Mar 2004 15:55:26 -0800 (PST) Received: from pimout3-ext.prodigy.net (pimout3-ext.prodigy.net [207.115.63.102]) by mx1.FreeBSD.org (Postfix) with ESMTP id 226E143D1D for ; Sat, 27 Mar 2004 15:55:26 -0800 (PST) (envelope-from julian@elischer.org) Received: from elischer.org (adsl-216-100-132-94.dsl.snfc21.pacbell.net [216.100.132.94])i2RNtJGa198542; Sat, 27 Mar 2004 18:55:19 -0500 Message-ID: <406613F8.4090700@elischer.org> Date: Sat, 27 Mar 2004 15:53:28 -0800 From: Julian Elischer User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.4b) Gecko/20030524 X-Accept-Language: en, hu MIME-Version: 1.0 To: Julian Elischer References: <20040327200052.7107616A4F6@hub.freebsd.org> <40661362.1010605@elischer.org> In-Reply-To: <40661362.1010605@elischer.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-stable@freebsd.org Subject: Re: USB2 device X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 27 Mar 2004 23:55:26 -0000 Julian Elischer wrote: > I have the same Lexar Jumpdrive and it seems to work for me on an Asus > P4PE > with intel EHCI driver, as long as I plug it in AFTER booting. > > however: > It hangs if I have the drive in during boot. > It doesn't seem to give me the speed I get on another system > > BTW the speeds are: > > low speed (1.5Mb/Sec) > > full speed (12Mb/sec) > > high speed (480Mb/sec) > > > I'm working on the USB code at the moment so I'm hoping to gete it fixed. I forgot to say that you need to configure the EHCI driver into our kernel or you can not get USB2. I notice it is not in your kernel dmesg.. > > -- original message: > > Hello, > >> I have an ASUS P4C-800-E Deluxe Motherboard, P4 3.0GHz processor with >> builtin >> USB 2.0 controllers. >> >> I am having a problem with the Lexar Media JumpDrive 2.0 Pro 256M >> memory keystick. >> >> usbd nevers sees it. I finally went into BIOS and set the Speed for >> the USB >> 2.0 Controller to FullSpeed (maybe HighSpeed, in whatever case its >> 12MBps as >> opposed to 240MBps). When setting it to 12MBps, usbd sees the drive and >> attaches it. Setting the speed to higher, usbd does NOT attach it. >> > > I don't know how the Bios is connecte with this... > >>> >> >> Also NOTE: I have a SIIG SlimHub 2.0 4 ports, that I can not attach my >> JumpDrive too. I must set the speed to 12MBps and attach it directly to a >> port on my PC to get it to see it. >> >> Any help in this would be appreciated. >> >> Thanks! Michael E. Mercer >> >> My system is the latest 4.9-Stable build as of yesterday. > > > I committed some relevant stuff yesterday. make sure you have that.. > -- +------------------------------------+ ______ _ __ | __--_|\ Julian Elischer | \ U \/ / hard at work in | / \ julian@elischer.org +------>x USA \ a very strange | ( OZ ) \___ ___ | country ! +- X_.---._/ presently in San Francisco \_/ \\ v