Date: Tue, 15 Aug 2006 20:58:32 +0200 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-mobile@freebsd.org Subject: Acer Aspire AS5672 laptop and FreeBSD7.0-current (august snapshot) Message-ID: <20060815205832.7b8a7edd.torfinn.ingolfsen@broadpark.no>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --Boundary_(ID_pIll5Q3Z3OZYwQYg4f+L5A) Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Specifications from Wikipedia: http://en.wikipedia.org/wiki/Aspire_5000#Aspire_5672_WLMi I'm still working (slowly) with this laptop, in order to see if I can make it work reasonably well with FreeBSD. One part of that is testing with 7.0-current. I just completed an install (upgrade) of the August snapshot. Status is the same as with the July snapshot: - with ACPI enabled, both wired and wireless networking refuse to work (see dmesg output) - with ACPI disabled, the machine hangs / stops before I can login. Attached are dmesg and verbose dmesg output, with ACPI enabled. -- Regards, Torfinn Ingolfsen, Norway --Boundary_(ID_pIll5Q3Z3OZYwQYg4f+L5A) Content-type: text/plain; name=kg-home-dmesg-7.0-current-20060814.txt Content-transfer-encoding: 7BIT Content-disposition: attachment; filename=kg-home-dmesg-7.0-current-20060814.txt Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT-200608 #0: Tue Aug 8 09:05:08 UTC 2006 root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Genuine Intel(R) CPU T2250 @ 1.73GHz (1733.40-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xc189<SSE3,MON,EST,TM2,XTPR,<b15>> AMD Features=0x100000<NX> Cores per package: 2 real memory = 2145910784 (2046 MB) avail memory = 2094755840 (1997 MB) ACPI APIC Table: <INTEL CALISTGA> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <PTLTD RSDT> on motherboard ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0 ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497cdc0 StartNode 0xc497cdc0 ReturnNode 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) unknown: I/O range not supported Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd0000000-0xd7ffffff,0xc8100000-0xc810ffff irq 16 at device 0.0 on pci1 pci0: <multimedia> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci4: <ACPI PCI bus> on pcib4 bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> irq 18 at device 0.0 on pci4 bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). bge0: couldn't map memory device_attach: bge0 attach returned 6 pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci5: <ACPI PCI bus> on pcib5 uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xc8004000-0xc80043ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered ugen0: <OEM Camera, class 255/255, rev 2.00/1.00, addr 2> on uhub4 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci10: <ACPI PCI bus> on pcib6 cbb0: <PCI-CardBus Bridge> mem 0xc8404000-0xc8404fff irq 20 at device 9.0 on pci10 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <1394 Open Host Controller Interface> mem 0xc8405000-0xc84057ff,0xc8400000-0xc8403fff irq 20 at device 9.1 on pci10 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:c0:9f:00:00:9a:84:d3 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:c0:9f:9a:84:d3 fwe0: Ethernet address: 02:c0:9f:9a:84:d3 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci10: <mass storage> at device 9.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 sio0 port 0x2f8-0x2ff,0x6f8-0x6ff irq 3 drq 3 flags 0x10 on acpi0 sio0: type 16550A sio0: [FAST] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xdf800-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ad0: 114473MB <SAMSUNG HM120JI YF100-10> at ata0-master UDMA33 ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND acd0: DVDR <MATSHITADVD-RAM UJ-845S/D201> at ata1-master UDMA33 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s4a ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND --Boundary_(ID_pIll5Q3Z3OZYwQYg4f+L5A) Content-type: text/plain; name=kg-home-dmesg-7.0-current-20060814-verbose.txt Content-transfer-encoding: 7BIT Content-disposition: attachment; filename=kg-home-dmesg-7.0-current-20060814-verbose.txt null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Aug 8 2006 09:04:34) npx0: INT 16 interface acpi0: <PTLTD RSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0 ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497cde0 StartNode 0xc497cde0 ReturnNode 0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27a08086) pcibios: BIOS version 2.10 Found $PIR table, 13 entries at 0xc00fdd60 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 A 0x60 6 10 11 embedded 0 1 A 0x60 6 10 11 embedded 1 0 A 0x60 6 10 11 embedded 0 2 A 0x60 6 10 11 embedded 0 27 A 0x6a 6 10 11 embedded 0 28 A 0x61 6 10 11 embedded 0 28 B 0x60 6 10 11 embedded 0 28 C 0x62 6 10 11 embedded 0 28 D 0x63 6 10 11 embedded 5 0 A 0x62 6 10 11 embedded 0 29 A 0x6b 6 10 11 embedded 0 29 B 0x63 6 10 11 embedded 0 29 C 0x62 6 10 11 embedded 0 29 D 0x60 6 10 11 embedded 0 30 A 0x6a 6 10 11 embedded 0 30 B 0x68 6 10 11 embedded 0 31 A 0x62 6 10 11 embedded 0 31 B 0x63 6 10 11 embedded 0 31 D 0x60 6 10 11 embedded 10 0 A 0x61 6 10 11 embedded 10 9 A 0x68 6 10 11 embedded 10 9 B 0x69 6 10 11 embedded 10 9 C 0x6a 6 10 11 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 28 func 3 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 2 acpi0: Power Button (fixed) acpi0: wakeup code va 0xd88c3000 pa 0x9d000 unknown: I/O range not supported acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route count_size Timecounter "HPET" frequency 14318180 Hz quality -200 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 1 3 4 5 6 7 10 12 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 1 3 4 5 6 7 11 12 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 1 3 4 5 6 7 11 12 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 10 12 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 10 12 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 11 12 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 10 12 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 10 12 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 10 12 14 15 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 1 3 4 5 6 7 10 12 14 15 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 1 3 4 5 6 7 11 12 14 15 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 1 3 4 5 6 7 11 12 14 15 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 1 3 4 5 6 7 11 12 14 15 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x1010 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x27a0, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27a1, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x1c (7000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27d8, revid=0x02 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base c8000000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x27d0, revid=0x02 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x27d2, revid=0x02 bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27d4, revid=0x02 bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 pcib0: matched entry for 0.28.INTC pcib0: slot 28 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27d6, revid=0x02 bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27c8, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x27c9, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x27ca, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x27cb, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type 4, range 32, base 00001860, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x27cc, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base c8004000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2448, revid=0xe2 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b9, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27c4, revid=0x02 bus=0, slot=31, func=2 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b8, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 000018b0, size 4, enabled found-> vendor=0x8086, dev=0x27da, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 000018c0, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x2000-0x2fff pcib1: memory decode 0xc8100000-0xc81fffff pcib1: prefetched decode 0xd0000000-0xd7ffffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x71c5, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 3, range 32, base d0000000, size 27, enabled pcib1: (null) requested memory range 0xd0000000-0xd7ffffff: good map[14]: type 4, range 32, base 00002000, size 8, enabled pcib1: (null) requested I/O range 0x2000-0x20ff: in range map[18]: type 1, range 32, base c8100000, size 16, enabled pcib1: (null) requested memory range 0xc8100000-0xc810ffff: good pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd0000000-0xd7ffffff,0xc8100000-0xc810ffff irq 16 at device 0.0 on pci1 pci0: <multimedia> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: memory decode 0x0-0x0 pcib2: prefetched decode 0x0-0x0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x0-0x0 pcib3: memory decode 0x0-0x0 pcib3: prefetched decode 0x0-0x0 pci3: <ACPI PCI bus> on pcib3 pci3: physical bus=3 found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base 00000000, size 12, memory disabled pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 17 pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0x0-0x0 pcib4: memory decode 0x0-0x0 pcib4: prefetched decode 0x0-0x0 pci4: <ACPI PCI bus> on pcib4 pci4: physical bus=4 found-> vendor=0x14e4, dev=0x169d, revid=0x21 bus=4, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 64, base 00000000, size 16, memory disabled pcib4: matched entry for 4.0.INTA pcib4: slot 0 INTA hardwired to IRQ 18 bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> irq 18 at device 0.0 on pci4 pcib4: bge0 requested unsupported memory range 0x0-0xffffffff (decoding 0x0-0x0, 0x0-0x0) bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). bge0: couldn't map memory device_attach: bge0 attach returned 6 pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib5: secondary bus 5 pcib5: subordinate bus 7 pcib5: I/O decode 0x0-0x0 pcib5: memory decode 0x0-0x0 pcib5: prefetched decode 0x0-0x0 pcib5: could not get PCI interrupt routing table for \\_SB_.PCI0.RP04 - AE_NOT_FOUND pci5: <ACPI PCI bus> on pcib5 pci5: physical bus=5 uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 23 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 49 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xc8004000-0xc80043ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xc8004000 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered ugen0: <OEM Camera, class 255/255, rev 2.00/1.00, addr 2> on uhub4 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib6: secondary bus 10 pcib6: subordinate bus 11 pcib6: I/O decode 0xf000-0xfff pcib6: memory decode 0xc8400000-0xc84fffff pcib6: prefetched decode 0xfff00000-0xfffff pcib6: Subtractively decoded bridge. pci10: <ACPI PCI bus> on pcib6 pci10: physical bus=10 found-> vendor=0x104c, dev=0x8039, revid=0x00 bus=10, slot=9, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x30 (1440 ns), mingnt=0xc4 (49000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c8404000, size 12, enabled pcib6: (null) requested memory range 0xc8404000-0xc8404fff: good pcib6: matched entry for 10.9.INTA pcib6: slot 9 INTA hardwired to IRQ 20 found-> vendor=0x104c, dev=0x803a, revid=0x00 bus=10, slot=9, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c8405000, size 11, enabled pcib6: (null) requested memory range 0xc8405000-0xc84057ff: good map[14]: type 1, range 32, base c8400000, size 14, enabled pcib6: (null) requested memory range 0xc8400000-0xc8403fff: good pcib6: matched entry for 10.9.INTA pcib6: slot 9 INTA hardwired to IRQ 20 found-> vendor=0x104c, dev=0x803b, revid=0x00 bus=10, slot=9, func=2 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c8406000, size 12, enabled pcib6: (null) requested memory range 0xc8406000-0xc8406fff: good pcib6: matched entry for 10.9.INTA pcib6: slot 9 INTA hardwired to IRQ 20 cbb0: <PCI-CardBus Bridge> mem 0xc8404000-0xc8404fff irq 20 at device 9.0 on pci10 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc8404000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x8039104c 0x02100007 0x06070000 0x00823010 0x10: 0xc8404000 0x020000a0 0x200b0b0a 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x04440114 0x40: 0x00941025 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x3844d060 0x02d40019 0x001f0000 0x01321b22 0x90: 0x606602c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x08000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x438e450d 0x97019449 0x00000000 0x00000000 fwohci0: vendor=104c, dev=803a fwohci0: vendor=104c, dev=803a fwohci0: <1394 Open Host Controller Interface> mem 0xc8405000-0xc84057ff,0xc8400000-0xc8403fff irq 20 at device 9.1 on pci10 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xc8405000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:c0:9f:00:00:9a:84:d3 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:c0:9f:9a:84:d3 fwe0: bpf attached fwe0: Ethernet address: 02:c0:9f:9a:84:d3 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci10: <mass storage> at device 9.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18b0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54 ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0x8e01 0x8e09 0x8e01 0x8e01 sio0: irq maps: 0x8e01 0x8e09 0x8e01 0x8e01 sio0 port 0x2f8-0x2ff,0x6f8-0x6ff irq 3 drq 3 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 3 (ISA IRQ 3) to vector 58 sio0: [FAST] ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xdf800-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 134273 -> 100000 procfs registered lapic: Divisor 2, Frequency 66669717 hz Timecounter "TSC" frequency 1733412213 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. acpi_acad0: acline initialization start battery0: battery initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND battery0: battery initialization done, tried 1 times ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad0: 114473MB <SAMSUNG HM120JI YF100-10> at ata0-master UDMA33 ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: <MATSHITADVD-RAM UJ-845S/D201> DVDR drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable caddy, unlocked acd0: Medium: no/blank disc (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 INTR: Assigning IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 1 to local APIC 0 INTR: Assigning IRQ 3 to local APIC 1 ioapic0: Assigning ISA IRQ 3 to local APIC 1 INTR: Assigning IRQ 9 to local APIC 0 ioapic0: Assigning ISA IRQ 9 to local APIC 0 INTR: Assigning IRQ 12 to local APIC 1 ioapic0: Assigning ISA IRQ 12 to local APIC 1 INTR: Assigning IRQ 14 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 0 INTR: Assigning IRQ 15 to local APIC 1 ioapic0: Assigning ISA IRQ 15 to local APIC 1 INTR: Assigning IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 0 INTR: Assigning IRQ 18 to local APIC 1 ioapic0: Assigning PCI IRQ 18 to local APIC 1 INTR: Assigning IRQ 19 to local APIC 0 ioapic0: Assigning PCI IRQ 19 to local APIC 0 INTR: Assigning IRQ 20 to local APIC 1 ioapic0: Assigning PCI IRQ 20 to local APIC 1 INTR: Assigning IRQ 23 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 0 Trying to mount root from ufs:/dev/ad0s4a start_init: trying /sbin/init ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0 ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND battery0: error fetching current battery status -- AE_NOT_FOUND splash: image decoder found: daemon_saver --Boundary_(ID_pIll5Q3Z3OZYwQYg4f+L5A)--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060815205832.7b8a7edd.torfinn.ingolfsen>