Date: Mon, 24 Jan 2005 07:13:04 +0800 (CST) From: "T.F. Cheng" <tfcheng@yahoo.com> To: FreeBSD <freebsd-questions@freebsd.org> Subject: sk0: not freezing up, looking good!! but.... Message-ID: <20050123231304.58729.qmail@web51002.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi,
I also have trouble with sk0 driver on my 5.3/i386,
after a recent search and a cvsup to 5.3-STABLE source
(01/23/05), config and make depend all install my
kernel, I was able to boot up the machine with the
onboard NIC device turned on and without freezing the
whole thing up, this is good.... really good....
however, it still can't do DHCP, what I did was I
plugined the cable, killed the oroginal dhclient
process, and reissued one by "/sbin/dhclient sk0", it
took about a few minute before it gave up the prompt,
and there was no ip address, here is what I am now:
>ifconfig
sk0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
1500
inet6 fe80::211:2fff:fee0:3d61%sk0 prefixlen
64 scopeid 0x2
inet 0.0.0.0 netmask 0xff000000 broadcast
255.255.255.255
ether 00:11:2f:e0:3d:61
media: Ethernet autoselect (none)
status: no carrier
>dmesg
skc0: <Marvell Gigabit Ethernet> port 0xa800-0xa8ff
mem 0xfab00000-0xfab03fff irq 10 at device 10.0 on
pci0
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:11:2f:e0:3d:61
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseTX-FDX, auto
xl0: <3Com 3c905-TX Fast Etherlink XL> port
0xb000-0xb03f irq 10 at device 12.0 on pci0
miibus1: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
xl0: Ethernet address: 00:60:97:d5:2a:85
(xl0 is the NIC i am using as substitute now)
look like the sk0 is recognizing the device well,
and thing runs smoothly, really appreciate what people
have done for sk0, so sorry I don't know how to code.
And I was trying to identify which version of if_sk.c
I have now, in the file, it marked:
("$FreeBSD: src/sys/pci/if_sk.c,v 1.83.2.6 2005/01/21
00:50:51 mlaier Exp $") so I hoped this is the most
updated. And after cvsuping the source, I only did my
kernel, not the "world", is this enough? thank you for
your help.
=====
Best Regards,
Tsu-Fan Cheng
_________________________________________________________
Do You Yahoo!?
登記免費的 @yahoo.com 中文電子郵件 @ http://chinese.mail.yahoo.com
Get your free @yahoo.com address at http://chinese.mail.yahoo.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050123231304.58729.qmail>