Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 6 Dec 2006 14:33:31 +0200
From:      "George Kontostanos" <gkontos.mail@gmail.com>
To:        "Josh Stephenson" <jstep@unm.edu>
Cc:        freebsd-hardware@freebsd.org
Subject:   Re: FreeBSD SATA
Message-ID:  <f4775d410612060433v539e8161x7961c3ca8f2e24b5@mail.gmail.com>
In-Reply-To: <45764FDD.4030908@unm.edu>
References:  <45764FDD.4030908@unm.edu>

next in thread | previous in thread | raw e-mail | index | archive | help
Could you run a memtest? I had a similar problem once due to bad memory,
Regards,
George

On 12/6/06, Josh Stephenson <jstep@unm.edu> wrote:
>
> I'm having trouble installing FreeBSD on the following system:
> Intel Desktop Board DG965SS motherboard
> Intel Core Duo 2.8GHz
> 1GB Memory
> 1 SATA hard-drive
> 1 dvd/cd-burner sony dru-120c
>
> Here's the problem:
>
> When I boot the install, I get:
> Too many holes in the physical address space, giving up
> Too many holes in the physical address space, giving up
> Too many holes in the physical address space, giving up
> .....
>
> and then the system hangs at either this line:
> Interrupt storm detected on "irq17:"; throttling interrupt source
>
> or sometimes, I actually get into the install screen, but the response
> is ridiculously slow.  ie- I press the down arrow, and 30 seconds later,
> it respons, but eventually it just hangs completely.
>
> Any help would be much appreciated.
>
> -josh
> _______________________________________________
> freebsd-hardware@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "freebsd-hardware-unsubscribe@freebsd.org
> "
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?f4775d410612060433v539e8161x7961c3ca8f2e24b5>