Date: Tue, 21 Jan 1997 21:50:14 -0400 From: Bruno Néron <bruno@cite.net> To: questions@FreeBSD.org Subject: Free BSD & Drivers Message-ID: <32E57256.6718@cite.net>
next in thread | raw e-mail | index | archive | help
Bonjour à vous,
Upgrade de ma configuration hardware actuel. J'ai actuellement un
pentium 100 avec motherboard intel, cpu intel, scsi card adaptec aha
2940... et mon serveur tourne sur free bsd 2.1 avec succès. Je désire
augmenté la puissance de celui-ci avec les composantes suivantes:
motherboard: pr440fx intel
cpu : pentium pro 200 intel
************************************************************************************************
The PR440FX motherboard supports dual Intel
Pentium®Pro processors operating at 180 MHz or
200 MHz. Other features include the following:
Custom ATX form factor
Two 387-pin, Socket 8 type processor sockets
Four DIMM sockets for up to 512 MB of
maximum memory (with 128 MB buffered ECC
EDO DIMMs)
256 KB or 512 KB second-level cache
memory in Pentium Pro processor
Intel 82440FX PCIset
PCI and Memory Controller (PMC) and
Data Bus Accelerator (DBX)
82371SB PCI/ISA IDE Xcelerator (PIIX3)
Two Universal Serial Bus (USB) interfaces
Three PCI slots and one shared slot that can
support a PCI or ISA add-in card
National Semiconductor PC87308 integrated I/O
controller
Intel EtherExpress(tm) PRO/100B PCI LAN
subsystem (available only on selected
configurations)
Adaptec* 7880 SCSI controller
Crystal* CS4236 audio subsystem
Independent voltage and fan speed sensing for
each processor
Desktop Management Interface (DMI) included
in BIOS
********************************************************************************************************
Vais-je pouvoir utiliser tous le capacités hardware de ce bord ou
seulement une partie des options offertes?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?32E57256.6718>