Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 16 Apr 2007 10:19:26 -0400
From:      Lowell Gilbert <freebsd-questions-local@be-well.ilk.org>
To:        "Philip M. Gollucci" <pgollucci@p6m7g8.com>
Cc:        questions@freebsd.org
Subject:   Re: Dell PowerEdge SC1435 and FreeBSD
Message-ID:  <44zm58flld.fsf@be-well.ilk.org>
In-Reply-To: <461F01F2.50606@p6m7g8.com> (Philip M. Gollucci's message of "Thu\, 12 Apr 2007 21\:07\:14 -0700")
References:  <461F01F2.50606@p6m7g8.com>

next in thread | previous in thread | raw e-mail | index | archive | help
"Philip M. Gollucci" <pgollucci@p6m7g8.com> writes:

> Hi,
>
> A company bought 3 of these and had issue installing FreeBSD on them
> (I'm currently off site) saying it hung very early in the boot process
> from CD for 6.2 amd64 and the monitor went blank.  Can anyone here
> comment on their experiences with this ?
>
> I've included some links below too.
>
> http://configure.us.dell.com/dellstore/config.aspx?c=us&cs=04&kc=6W300&l=en&oc=bscwek1&s=bsd
> Dual Core 2216 Processor;
> 	2X1MB Cache, 2.4GHz Opteron,
> 	1Ghz HyperTransport for PowerEdge SC 1435
> Dual Core Opteron 2nd Processor,
> 	2x1MB Cache, 2.4GHz
> 	1Ghz HyperTransport for PowerEdge SC 1435
> 4GB Memory, 4x1GB, 667MHz, Single Ranked DIMMs
> Broadcom TCP/IP Offload EngineNot Enabled
> Riser with 1 PCIe Slot for PowerEdge SC1435
> 250GB, SATA, 3.5-inch 7.2K RPMHard Drive
> SAS 5IR SAS, PCI-Express Internal RAID Adapter
> On-Board Dual Gigabit Network Adapter, No TOE
> 24X IDE CD-RW/DVD ROM Drive for PowerEdge SC 1435
> Bezel for PESC1435
> 250GB, SATA, 3.5-inch 7.2K RPMHard Drive
> Add-in SATA/SAS controller, 2 Hard Drives, RAID 1, PowerEdge SC1435
> Sliding Rapid/Versa Rails and Cable Management Arm,Universal
>
> http://www.freebsdsystems.com/sata2_rackserver_multicore.php
> Seems to validate the video card an ATI ES1000 16MB is okay.
>
> http://lists.freebsd.org/mailman/htdig/freebsd-hardware/2006-December/004103.html
> seems to say it works in general.

You'll need to look at the specific messages for information,
but trying i386 might give you more information.

The video isn't relevant; any video at all should support
console text fine.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44zm58flld.fsf>