Date: Tue, 24 Jan 2006 18:01:49 +0100 From: Rainer Duffner <rainer@ultra-secure.de> To: =?windows-1252?Q?Uro=9A_Gruber?= <uros.gruber@sir-mag.com> Cc: current@FreeBSD.org Subject: Re: Marvell/SysKonnect YukonII source code available Message-ID: <43D65D7D.8030200@ultra-secure.de> In-Reply-To: <43D63F96.1050908@sir-mag.com> References: <43D5FF19.7090903@freebsd.org> <20060124231353.c0554f76.nork@FreeBSD.org> <43D63F96.1050908@sir-mag.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Uroš Gruber wrote: > Norikatsu Shigemura wrote: > >> On Tue, 24 Jan 2006 11:19:05 +0100 >> Andre Oppermann <andre@freebsd.org> wrote: >> >> >>> Marvell/SysKonnect made the source code to the YukonII chips available >>> today under a BSD license: >>> http://people.freebsd.org/~andre/mykbsd60x86-8.12.1.3-src.tgz >>> I haven't tested the driver yet and I don't know if it available >>> directly >>> from the their website already. >>> Many thanks to Gerald and Frank at SysKonnect for working with us and >>> making this possible! >>> >> >> >> Good works!! I confirmed it on 6.0R-p2, but I didn't test. >> >> # mkdir /usr/src/sys/dev/myk >> # cd /usr/src/sys/dev/myk >> # tar xvf mykbsd60x86-8.12.1.3-src.tgz >> # make clean all >> : >> # kldload ./if_myk.ko >> # dmesg >> : >> myk0: <Marvell 88E8050 Gigabit Ethernet Controller, Ver. >> 8.12.1.3> port 0xa800-0xa8ff mem 0xff720000-0xff723fff irq 17 at >> device 0.0 on pci4 >> myk0: Ethernet address: 00:13:20:b4:85:66 >> # ifconfig myk0 >> myk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 >> options=2b<RXCSUM,TXCSUM,VLAN_MTU,JUMBO_MTU> >> ether 00:13:20:b4:85:66 >> media: Ethernet autoselect >> status: no carrier >> > > 5.4-RELEASE-p8 I get this > > sky2.c: In function `Yk2IntServiceRoutine': > sky2.c:1478: warning: dereferencing `void *' pointer > sky2.c:1478: error: request for member `Arpcom' in something not a > structure or union > *** Error code 1 > > Stop in /usr/src/sys/dev/myk. > I don't own such a card, but considering the filename, I'd assume that anything <6.0 is simply not going to work. cheers, Rainer
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43D65D7D.8030200>