Date: Sat, 27 Mar 2004 18:59:58 -0500 From: "Michael E. Mercer" <mmercer@nc.rr.com> To: Julian Elischer <julian@elischer.org> Cc: freebsd-stable@freebsd.org Subject: Re: USB2 device Message-ID: <1080431997.802.6.camel@fast.mmercer.com> In-Reply-To: <406613F8.4090700@elischer.org> References: <20040327200052.7107616A4F6@hub.freebsd.org> <40661362.1010605@elischer.org> <406613F8.4090700@elischer.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Julian, I am running 4.9-Stable. I do not see EHCI in the LINT file and config on a kernel config file says unknown ehci device. Any ideas? Thanks Michael E Mercer On Sat, 2004-03-27 at 18:53, Julian Elischer wrote: > Julian Elischer wrote: > > I have the same Lexar Jumpdrive and it seems to work for me on an Asus > > P4PE > > with intel EHCI driver, as long as I plug it in AFTER booting. > > > > however: > > It hangs if I have the drive in during boot. > > It doesn't seem to give me the speed I get on another system > > > > BTW the speeds are: > > > > low speed (1.5Mb/Sec) > > > > full speed (12Mb/sec) > > > > high speed (480Mb/sec) > > > > > > I'm working on the USB code at the moment so I'm hoping to gete it fixed. > > I forgot to say that you need to configure the EHCI driver into our kernel > or you can not get USB2. > I notice it is not in your kernel dmesg.. > > > > > -- original message: > > > > Hello, > > > >> I have an ASUS P4C-800-E Deluxe Motherboard, P4 3.0GHz processor with > >> builtin > >> USB 2.0 controllers. > >> > >> I am having a problem with the Lexar Media JumpDrive 2.0 Pro 256M > >> memory keystick. > >> > >> usbd nevers sees it. I finally went into BIOS and set the Speed for > >> the USB > >> 2.0 Controller to FullSpeed (maybe HighSpeed, in whatever case its > >> 12MBps as > >> opposed to 240MBps). When setting it to 12MBps, usbd sees the drive and > >> attaches it. Setting the speed to higher, usbd does NOT attach it. > >> > > > > I don't know how the Bios is connecte with this... > > > >>> > >> > >> Also NOTE: I have a SIIG SlimHub 2.0 4 ports, that I can not attach my > >> JumpDrive too. I must set the speed to 12MBps and attach it directly to a > >> port on my PC to get it to see it. > >> > >> Any help in this would be appreciated. > >> > >> Thanks! Michael E. Mercer > >> > >> My system is the latest 4.9-Stable build as of yesterday. > > > > > > I committed some relevant stuff yesterday. make sure you have that.. > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1080431997.802.6.camel>